La Crosse Technology 79400 Bedienungsanleitung

MODEL NUMBER: 79400

BACKYARD

WIND + WEATHER STATION

SETUP GUIDE

Important

This station does not support connected features and will not connect to WiFi. Some of

the on-screen elements may not apply.

Please disregard the following items and messages:

• WiFi Icon

• SEE APP TO CONNECT

• LOST WIFI

• CONNECT TO WIFI

• WAIT FOR WEATHER

• CHECK APP

Most of these are temporary, and will only show for a limited time.

Table of Contents

WINDBASICS

TEMP. & HUMIDITY (TH) FORECAST

APPENDIX

EXTRA SENSORS

SUPPORT

Viewing Your Wind Data

History Records

Wind Speed Alert

Initial Setup

Station Settings

Settings Menu Order

Buttons

LCD Display Brightness

Auto-Dim Settings

Viewing Your Temperature

and Humidity Data

History Records and Alerts

“Feels Like” Temp.

Seasonal Trees

Forecast Icons

Relative Pressure

Speciﬁcations

Warranty

Recycling & Disposal

Cautions/Statements

Add-On TH Sensor

Additional Add-On

Sensors

Adding Sensors to your

Station

Factory Reset

Stay in Touch

We’re Here to Help

POSITION BREEZE SENSOR

Positioning Your Sensor

Mounting Accessories

Basic Installation Options

Advanced Installation

Initial Setup

Power Up

Note: It may take up to 10 minutes for your sensor data to appear on your station’s screen.

BASICS

1. Remove the Insulation Tab from the

Battery Compartment of your Breeze Pro

Sensor, and make sure the power switch

is turned ON.

2. Insert the 5V Power Adapter into an

outlet, and then plug it into the Power

Jack on the back of the station. Next,

remove the Insulation Tab from your

station’s Battery Compartment.

Bottom of Breeze Pro Sensor

Model No. LTV-WSDTH01

Back of Station

Model No. 79400

Station Settings

Use the +/- buttons on the

top of the station to adjust

the values.

Press the SET button to

conﬁrm selection and move

to next step.

You may exit the Settings

Menu at any time by pressing

the LIGHT button.

When the station is ﬁrst powered on, it will begin searching for your outdoor sensor, which should

connect shortly. Disregard the SEE APP TO CONNECT message.

Hold the SET button to enter the Settings Menu for adjusting your time, date, and other settings.

Settings Menu Order

• Language

• Greeting

• 12/24 Hour Time

• Hour

• Minutes

• Year

• Month

• Date

• Fahrenheit/Celsius

• Pressure Units (InHg/hPa)

• Pressure Number Setting*

• Wind Speed Units (MPH or KMH)

• Wind Direction (Letters or Degrees)

* Pressure: The default pressure reading is 29.92

INHg (1013 hPa). The station will acclimate on

it’s own if the pressure number is not adjusted

manually.

Weekday: Weekday will set automatically after year,

month, & date settings are adjusted.

Buttons

1. WIND ALERTS

Hold to enter Wind Alert

Settings. Press to turn Wind

Alert on/o.

2. WIND

Press to view Wind Speed

History. While viewing,

hold the MINUS button to

delete the history reading.

3. TEMP.

Press to view Temperature

and Humidity History.

While viewing, hold

MINUS button to delete

the history reading.

6. EXTRA

Press to toggle through

extra sensors and pressure.

Hold to add sensors. While

viewing, hold the MINUS

button delete the sensor.

4. SET

Hold to enter Settings

Menu.

7. SENSOR

Press to view sensor ID

numbers. While viewing,

hold the MINUS button to

delete the sensor.

5. PLUS/MINUS (+/-)

Use to adjust values.

8. LIGHT

Press to adjust backlight.

Hold to enter Auto-Dim

settings.

6 8

Language Options: English, Spanish, French,

and German (Translation Available for Menus &

Calendar)

Please disregard these highlighted button functions on the back of your display:

Important

LCD Display Brightness

Adjusting the LCD Display Brightness

Auto-Dim Settings

Press the LIGHT button to adjust the backlight

intensity. There are 4 levels, plus an o option.

Hold the LIGHT button to enter the Auto-Dim Settings Menu.

Program your display to automatically dim during preselected times.

Press the +/- buttons to turn the Auto-Dim feature on or o. Press

LIGHT to conﬁrm.

Press the +/- buttons to adjust the starting hour. Press LIGHT to

conﬁrm.

Press the +/- buttons to adjust the stopping hour. Press LIGHT to

conﬁrm and exit. The icon will appear on the

LCD when the Auto-Dim feature

activated.

This station does not support connected features and will not connect to WiFi. Some of the on-screen

elements may not apply.

Please disregard the following items and messages:

• WiFi Icon

• SEE APP TO CONNECT

• LOST WIFI

• CONNECT TO WIFI

• WAIT FOR WEATHER

• CHECK APP

BASICS

 Ensure the sensor is mounted level with the Solar Panel facing

directly to the south. This will help optimize battery life and transmit

correct wind direction readings.

 Ideally, the Breeze Pro Sensor should be mounted on the tallest

object in your area. Avoid positioning the sensor in line with or

below eaves, rooﬂines, trees, or other objects that may obstruct

wind readings.

 Make sure all screws on the Mounting Bracket, Winds Cup, Wind

Vane, and Battery Compartment are securely fastened.

 The sensor should be mounted with the Wind Cups on top.

 The Breeze Pro sensor has a transmission range of 330 feet from

sensor to display.

Positioning the Breeze Pro Sensor

For Accurate Measurements

Included Mounting Accessories

The horizontal conduit

where the sensor attaches.

This piece will connect to

either the Adjustable Base

or the Pole Adapter.

Mast:

The main bracket used for mounting

onto ﬂat surfaces or with added U-bolts

(sold seperately). The grooves and Hand

Screw allow the bracket to secure to

angled surfaces while still ensuring the

Mast and sensor are level.

Adjustable Base:

Used to lock down and

secure the Mast to the

Adjustable Base or Pole

Adapter.

Hand Screw:

These Arrows provide exact 90 or

180 degree angles when aligned

with the arrow on the Mast.

Alignment Arrows:

Used in place of the Adjustable

Base for mounting on top of

cylindrical conduits.

1-Inch Maximum Pole Diameter

Pole Adapter

Basic Installation Options

1A Adjustable Base

1B Pole Adapter

Fence posts, poles, decks, and even mailboxes are all common mounting options due to their

convenience. Many users prefer these types of locations as the data they provide is accurate from their

ground level perspective. However, because wind in these spots is often aected by obstructions, the

readings may dier compared to local reporting stations.

1A. Mount the Adjustable Base onto a ﬂat surface using the four provided

screws.

1B. Secure the Pole Adapter to a cylindrical conduit using the two

provided screws.

2. Insert the Mast into the Breeze Pro Sensor and tighten the provided

screws on the sides.

3. Use the Hand Screw to attach the Mast to either the Adjustable Base

or Pole Adapter. Ensure the sensor is level, facing south, and securely

fastened at all mounting points.

Advanced Installation Options

Some advanced installation options include tripods, wall mounts, eave cross mounts, chimney mounts,

and many others. Any of these can be combined with U-bolts for attachment onto a tall cylindrical

conduit using our Adjustable Base. Please note that these advanced options will require additional

equipment and possibly professional help for best results.

U-bolt Adapters

Tripod Setup

Chimney Mount

The illustrations above are not to scale and are for informative purposes only.

La Crosse Technology is not responsible for any damages or injury that may occur during installation.

Viewing Your Wind Data

WIND

1. WIND SPEED TREND

INDICATOR

Shows wind speed trends

over the past 60 minutes

2. COMPASS ROSE

Displays cardinal direction

with animated arrows

(16 directions total)

5. RECEPTION INDICATOR

Indicates if the station is

receiving data from the

sensor

8. TOP WIND SPEED

The top wind speed in

the past 60 minutes

3. LOW BATTERY ICON

Appears when the sensor

battery needs to be

replaced

6. “NOW” WIND SPEED

The top wind speed in the

past 31 seconds

4. WIND DIRECTION

Choose between cardinal

points (letters) or degrees

in the Settings Menu

7. WIND SPEED ALERT

Appears if a wind speed

alert is set & active

Wind Speed History and Alerts

WIND

Viewing Wind Speed History Records

Activate/Deactivate Wind Speed Alert

Important Notes:

Press the WIND button to toggle through Wind Speed

History Records with time and date stamps.

The wind speed records include:

past 24 hours, 7 days, 1 month, & 1 year.

Press and release the WIND ALERTS button to activate/

deactivate the alert. WIND SPEED ALERT ON or OFF will

appear on the bottom of the LCD.

•The alert is defaulted to be o.

•When the armed alert value is reached, the Alert Icon will ﬂash and your station will beep ﬁve times

each minute until the value moves out of the alert range. Press any button to stop the alert sound.

•The Alert Icon will remain ﬂashing until out of the alert range.

1. Hold the WIND ALERTS button for to enter the Alert Settings Menu.

2. Use the +/- buttons to turn alerts ON/OFF and adjust wind speed settings. Press

the WIND ALERTS button to conﬁrm your selection.

3. Your Wind Speed Alert is active when the icon on.

Setting the Wind Speed Alert

Monthly Wind Speed Record Example

7. INDOOR TEMPERATURE

Current Indoor Temperature

8. INDOOR HUMIDITY

Current Indoor Humidity

1. OUTDOOR RECORDS 2. “FEELS LIKE”

TEMPERATURE

3. WIND SENSOR ICON

4. OUTDOOR TEMPERATURE 5. OUTDOOR HUMIDITY 6. TH SENSOR ICON

Daily HI & LO temperature

records from your outdoor

sensor

Viewing Your Temperature & Humidity Data

Based on current temp. &

wind speed (heat index &

wind chill)

Indicates TH readings are

provided by the Breeze Pro

Sensor.

Indicates readings are

provided by an add-on

Temperature/Humidity

sensor

Current Outdoor Temperature Current Outdoor Humidity

Temperature & Humidity History and Alerts

Viewing History Records

Press the TEMP button to toggle through indoor/outdoor temperature &

humidity records with time and date stamps.

History Records Viewing Order

•Outdoor High Temperature

•Outdoor Low Temperature

•Outdoor High Humidity

•Outdoor Low Humidity

•Indoor High Temperature

•Indoor Low Temperature

•Indoor High Humidity

•Indoor Low Humidity

•“Feels Like” High Temperature

•“Feels Like” Low Temperature

•Dew Point

Resetting Individual Temperature & Humidity

Records

1. Press the TEMP button to view the individual

temperature and humidity values you’d like to

reset.

2. Next, hold the MINUS (-) buttons until dashes

appear on the LCD.

3. This reading is now reset to your current

temperature or humidity value.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS 550 US Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1515U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Outdoor Sensor Handbuch

La Crosse Technology

La Crosse Technology WS-9023U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9066U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS7059 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1510-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7075UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8015U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417V2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7208U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7097U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA76669 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today TX24U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX-440-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417v3 Abmessungen

La Crosse Technology

La Crosse Technology 308-1415FCT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1613-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415V3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung