La Crosse Technology 308-1416v2 Bedienungsanleitung

Model: 308-1416v2

Instruction Manual

DC: 100120

Atomic Forecast Station

with Moon Phase

For online video support:

http://bit.ly/LaxTechTalk

Table of Contents

Let’s Get Started

1. Insert 2 AA batteries into your

sensor. Observe correct polarity.

∙ The red LED light will ﬂash when

your sensor transmits.

∙ The TX button lets you manually

transmit a signal.

2. Insert the 5V power cord into an

outlet, and then into your weather

station.

Optional: insert 3 AA batteries into

you station for time and date

backup.

3. Conﬁgure basic settings.

4. After 5 minutes, place your

sensor outside in a shaded

location.

TX button

LED

Welcome to the La Crosse Technology® family!

We hope you enjoy your new Atomic Forecast

Station with Moon Phase.

Page |1 Page | 2

Let’s Get Started

LCD Features

Basic Settings

Atomic Time Signal - WWVB

Daylight Saving Time Indicator

Moon Phases

Seasonal Changes in Foliage

Pressure Readings

Weather Forecast Icons

Forecast Trend Arrows

HI | LO Temperature/Humidity

Temperature/ Humidity

Trend Arrows

Set Weather Alerts

Active Alert

Backlight (3 Intensity Levels)

Low Battery Icon

Sensor Search

Station Restart

Position TX141TH-Bv2

Sensor

Position Weather Station

Help Us, Help You!

Let’s Be Social!

Care and Maintenance

Warranty and Support

Speciﬁcations

FCC Statement

Basic Settings

1. Hold the SET button for 3 seconds to enter basic settings.

2. Press and release the + or - button to adjust ﬂashing values.

Hold to adjust quickly.

3. Press and release the SET button to move to the next menu

item or exit the basic settings menu.

4. Press the LIGHT button at any time to exit.

Basic Settings Order:

• Language

(English, Español, Francais)

• Beep ON/OFF

• Atomic ON/OFF

• DST ON/OFF

• Time Zone

• 12Hr/24Hr Format

• Hour

• Minutes

• Year

• Month

• Date

• Temperature: Fahrenheit/Celsius

• Pressure units: INHG or HPA

• Pressure number setting

Note: When Español or

Francais are selected, the

settings menu will continue in

the language selected.

LCD Features

AM | PM

Atomic Time

Sensor Reception Alert Icon

Fahrenheit | Celsius

Trend Arrows

-24h -18h -12h -9h- 6h -3h0 h

Low Battery

Forecast Icons

Temperature Pressure Graph

Humidity Percent RH

Humidity

DST Indicator

Page | 3 Page | 4

Note: If you set Atomic Time

to OFF, the settings menu will

skip the DST and Time Zone

settings and continue with

12Hr/24Hr Format.

Fahrenheit \ Celsius InHg or hPa Pressure Number

Atomic Time Signal -WWVB

Language Beep ON | OFF Atomic ON | OFF

DST ON | OFF Time Zone

12/24 Hour Format Hour Minutes

Year Month Date

7 Time Zones

Note: Weekday will set automatically, when year, month and

date are set.

• Your station will search for the atomic signal at UTC 7:00,

8:00, 9:00, 10:00, and 11:00.

• If there is no WWVB signal reception, your station will search

every 2 hours until the WWVB time is received.

• The atomic time signal icon (tower) will ﬂash while searching,

and be solid when connected.

• Press and release the SEARCH button to manually search

for the WWVB atomic time signal.

• For information about WWVB visit: http://bit.ly/AtomicTime

Daylight Saving Time (DST) Indicator

• The letters DST will show when your station has

received the atomic time signal and Daylight Saving

Time is being observed.

• If you do not observe Daylight Saving Time, turn DST OFF in

the settings menu.

Page | 5 Page | 6

The moon phase is based on the Lunar Calendar and updates

when the year, month and date set (manually or by the WWVB

atomic time signal).

Moon Phases Pressure Readings

History Graph:

• Read from left to right, your Pressure History Graph indicates

the rise and fall in air pressure over the past 24 hours.

• The numbers below represent the hour in which the

reading was taken. The “0h” is the current pressure level.

“-3h” was the reading taken three hours ago, compared to

current pressure.

•The graph will scroll continually. This cannot be turned o.

Your station provides Relative Barometric Pressure in:

• Numbers-programmable in the settings menu

• History Graph- provides pressure trend for the past 24 hours

Pressure number:

• Your station will acclimate to the correct pressure without

setting it yourself.

• You also have the option of setting the pressure number to

match your local reporting station by using the settings

menu.

• In the settings menu you can also select the pressure unit of

Inches of Mercury (inHg default) or Hecto Pascal (hPa).

•Your weather station will change to reﬂect the seasons.

• The trees and foliage will change to give you a fresh look.

• The dates are programmed into your weather station for an

automatic foliage change.

Seasonal Changes in Foliage

March 20th – June 20th

Spring

Autumn

Summer

Winter

June 21st – Sept. 20th

Sept. 21st – Dec 20th

Dec 21st – Mar 19th

Page | 7 Page | 8

New

Moon

Waxing

Crescent

First

Quarter

Waxing

Gibbous

Waning

Crescent

Last

Quarter

Waning

Gibbous

Full

Moon

Weather Forecast Icons

• The forecast icons are determined by your station's

barometric pressure reading. Please allow 7-10 days for

calibration.

• Six forecast icons use changing atmospheric pressure to

predict weather conditions for the next 12-hours.

• When Outdoor temperature is below 32˚F and the forecast

shows RAIN or T-STORM, the station will display SNOW.

Sunny CloudsPartly Sunny

Rain SnowT-Storm

The arrows by the word FORECAST, indicate the change in

pressure over the past 3 hours.

• UP ARROW: Pressure is rising

• RIGHT ARROW: Pressure is unchanged

• DOWN ARROW: Pressure is falling

Forecast Trend Arrows

HI | LO Temperature/Humidity

• All HI/LO temperature/humidity records reset automatically at

12:00 (midnight).

• Press the TEMP button to view HI/LO records, Heat Index

and Dew Point.

º Press once to view HI temperature/humidity records.

º Press again to view LO temperature/humidity records.

º Press again to view outdoor Heat Index.

º Press again to view outdoor Dew Point.

• HI/LO records reset automatically at midnight.

Page | 9 Page | 10

Set Weather Alerts

There are 8 programmable weather alerts:

• Outdoor LOW Temperature

• Outdoor HIGH Temperature

• Outdoor LOW Humidity

• Outdoor HIGH Humidity

• Indoor LOW Temperature

• Indoor HIGH Temperature

• Indoor LOW Humidity

• Indoor HIGH Humidity

Note: When you enter the alerts menu, you will ﬁrst arm the

alert you wish to set, then set the alarm value.

Note: If you do wish not arm the alert, simply press the

ALERTS button to skip that alert and move to the next alert in

the alert menu.

• Hold the ALERTS button to enter alert menu.

• Outdoor LO ALERT ON | OFF will ﬂash.

Alert ON:

1. Press the + or - button to arm the alert. Press the ALERTS

button to make the armed alerts value ﬂash.

2. Press the + or - button to set the alert value (Hold to set

quickly).

3. Press ALERTS button to move to next alert.

4. Press the LIGHT button at any time to exit.

Alert OFF:

1. Alerts are OFF unless armed. If you do not wish to set an

alert, simply press the ALERTS button again to move to the

next alert.

Alert OFF: press + or- to arm Alert ON: press + or- to adjust

Temperature/Humidity Trend Arrows

• The UP and DOWN arrows indicate changes in temperature

and humidity over the past hour.

• They update every 15 minutes and compare data from

exactly one hour prior.

Temperature: arrow changes every 2 degrees Fahrenheit.

Humidity: arrow changes every 3% RH

Page | 11 Page | 12

• The alert icon will only show when the alert is active, and

will indicate HI or LO alert.

• When armed alert value is reached, station will beep 5 times,

once each minute, until out of alert range.

• The ﬂashing alert icon will indicate whether it is a LO or HI

alert that is sounding.

• Press any button to stop the alert from sounding.

• The alert icon will still ﬂash while value is in alert range.

Disarm Alert:

1. Hold the ALERTS button to enter alert setting menu.

2. Press the ALERTS button until you see the alert you wish to

disarm.

3. Press the + or - button to disarm the alert. The alert will not

sound and the alert icon will not show.

4. Press the LIGHT button to exit.

Active Alert

Backlight (3 intensity levels)

• When operating with the AC adapter, press and release the

LIGHT button to adjust the backlight.

• Intensity Levels: 0% | 20% | 100%

• When operating on battery power only, press the LIGHT

button to activate the backlight for 10 seconds at 100%.

Low Battery Icon

• By indoor temperature; replace batteries in station.

• By outdoor temperature; replace batteries in the sensor.

• If your signal is lost, your station will display its LAST DATA

recorded from your sensor for 10 minutes.

• After that 10 minutes if the signal does not come back,

dashes will show.

• From the main screen hold the SEARCH button to search for

your outdoor sensor.

• The sensor reception icon will animate while searching for

your sensor.

• The icon will be solid when the sensor is connected.

• Your station will search for your missing sensor for 3 minutes

every hour until signal is found.

Sensor Search

Page | 13 Page | 14

Station Restart

A factory restart of your station will return it to its default

settings and “out of the box” condition. This may resolve

connection issues with your sensor.

1. Be sure there are fresh batteries in your sensor and station.

2. Hold the ALERTS and LIGHT button together for

5 seconds to restart the station.

Position TX141TH-Bv3 Sensor

• To mount the sensor, use the hole at the top to either

hang it from the back using a nail, or insert one

mounting screw through the front of your sensor.

• Mount the TX141TH-Bv3 sensor on a north-facing

wall or in any shaded area. Under an eave or deck rail

is preferred.

• The maximum wireless transmission range to your

weather station is over 330 feet (100 meters) in open air,

not including walls or ﬂoors.

• Be sure the sensor is mounted vertically, to allow

moisture to drain out properly.

• Watch sensor mounting video:

http://bit.ly/TH_SensorMounting

Position Weather Station

• Pull out the stand and place on a ﬂat surface.

• Or use the hanging holes on the back to mount on a wall.

• Choose a location 6 feet or more away from electronics

such as cordless phones, gaming systems, televisions,

microwaves, routers, etc.

• Place within range of the outdoor sensors (330 ft, 100m

open air).

• Obstacles such as walls, windows, stucco, concrete, and

large metal objects can reduce the range.

product support, and awesome giveaways.

Let’s Be Social!

If you have ideas for features or support solutions you’d like

to see us make, please let us know! We truly want to make

owning a La Crosse Technology product not only a practical

experience, but also a fun one.

So email us at: store@lacrossetechnology.com

Help Us, Help You!

Page | 15 Page | 16

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard, Lithium, or Rechargeable

Batteries.

• Always purchase the correct size and grade of battery most

suitable for intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior

to battery installation.

• Ensure the batteries are installed with correct polarity

(+ and -).

• Remove batteries from equipment when it is not used for an

extended period of time.

• Promptly remove expired batteries.

Care and Maintenance Speciﬁcations

Indoor

Thermo-hygro Sensor

Battery Life

Dimensions

Power

Temperature Range:

Humidity Range:

Relative Pressure Range:

32˚F to 99˚F (0˚C to 37˚C)

10% RH to 99%RH

23.62 to 32.48 inHg (800 to 1100 hPa)

Temperature Range:

Humidity Range:

-40°F to 140°F (-40°C to 60°C)

Note: When temperatures are colder than

-22°F (30°C) it is recommended to use lithium

batteries

10% RH to 99%RH

308-1416v2 Station:

Optional Battery Backup:

TX141TH-Bv3 Sensor:

5.0 Volt 150mA power cord included

(Required) AC6: GPU280500150WAOO

3-AA batteries not included, backup for time

and date

2-AA batteries not included

308-1416v2 Station:

TX141TH-Bv3 Sensor:

48-60 months with power cord use

over 24 months with reputable batteries.

308-1416v2 Station:

TX141TH-Bv3 Sensor:

6.89” L x 1.26” W x 6.4” H

(17.5 L cm x 3.2 W cm x H-16.32 H cm)

1.57” L x 0.79” W x 5.12” H

(4.0cm L x 2.0cm W x 13.0cm H)

La Crosse Technology, Ltd. provides a 1-year limited time

warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help:

Phone: 1.608.782.1610

Online Product Support and Registration:

www.lacrossetechnology.com/support

Warranty and Support

Page | 17 Page | 18

Andere Handbücher für 308-1416v2

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS6205 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-3610 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Temperature Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Handbuch

La Crosse Technology

La Crosse Technology 308-1414W Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9023U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-3102U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1710v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9020U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2310 Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS6282 Installations- und Betriebshandbuch

La Crosse Technology

La Crosse Technology WS-7097U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-450B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8015U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7076U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9119U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology TX-440-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9400U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-2314 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology W85777 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung