La Crosse Technology TX141TH-B Bedienungsanleitung

Model: T83653 www.lacrossetechnology.com/support Page | 1

Model: T83653

Manual

This Wireless Color Forecast Station with backlit display provides real-time weather straight from your

backyard. It has a USB charging port to charge your smartphone or other device. The animated color

forecast icons react to changing barometric pressure. Monitor indoor and outdoor temperature with daily

min/mix records and humidity, track weather trends and set your own high and low temperature alerts--all

in one convenient device for your desktop or bedside table. It also features heat index, dew point, digital

time and date with snooze alarm, and has a wireless transmission range of over 200 ft. to the backyard

temp./humidity sensor.

Wireless Color Forecast Station with TX141TH-B Outdoor Transmitter

Get Support: www.lacrossetechnology.com/t83653

Initial Startup

Step 1: Insert the included 5-volt AC power adapter into forecast station and then into wall outlet.

Step 2: Insert 3 NEW AAA batteries (not included) into the forecast station. Observe the correct polarity.

Step 3: Insert 2 NEW AA batteries (not included) into the TX141TH-B transmitter. Observe the correct

polarity.

Restart: If there is no outdoor temperature data after 3 minutes, unplug the AC adapter and remove

batteries from the forecast station & transmitter for 15 minutes. Return to Step 1 above.

Out Temperature

Humidity + Trends

Animated Forecast

+ Trends

In. Temperature

Humidity + Trends

Time, Calendar

+ Alarm

Function Buttons

In/Out

Temp. Alerts

TX141TH-B

Model: T83653 www.lacrossetechnology.com/support Page | 2

Table of Contents

Wireless Color Forecast Station with TX141TH-B Outdoor Transmitter 1

Initial Setup 1

Restart 1

Table of Contents 2

Features 3

Function Buttons 3

Program Menu 4

12-hour or 24-hour Time Format 4

Set Time 4

Set Calendar 4

Fahrenheit/Celsius 4

Alarm Time 5

Set Alarm 5

Activate/Deactivate Alarm 5

Snooze Alarm 5

USB Charge Port 5

Backlight 6

AC Power Adapter 6

Batteries 6

Temperature Alerts 6

Select Temperature Alerts 6

Temperature Alerts Arm/Disarm 7

Active Alert 7

Weather Forecast Icon 7

Forecast Trend Arrows 8

Temperature Trend Arrows 8

Min/Max Temperature Data 8

Heat Index/Dew Point 8

Outdoor Temperature/Humidity Flashes 9

Power the Color Forecast Station 9

AC Power Adapter 9

Batteries 9

Install Batteries in the Outdoor Transmitter 10

Outdoor Transmitter Signal Reception 10

Search for Transmitter 10

Position the Forecast Station 10

Position the Outdoor Transmitter 10

Care and Maintenance 11

Low Battery Icon 11

Specifications 11

Indoor 11

Outdoor 11

Power Requirements 12

Battery Life 12

Dimensions 12

Warranty and Support Information 12

FCC Statement 12

Model: T83653 www.lacrossetechnology.com/support Page | 3

Features

Color forecast changes based on barometric pressure

Forecast tendency indicator

Outdoor temperature (°F/°C)

Signal strength icon for sensor transmission

Outdoor temp. trend indicator

Outdoor humidity (%RH)

Low battery icon for station

Outdoor humidity trend indicator

Indoor temperature (°F/°C)

Indoor temp. trend indicator

Indoor humidity (%RH)

Indoor humidity trend indicator

Customizable IN/OUT temp. alerts

12/24 hour time (manual setting)

Calendar: month/day/date

Min/Max IN/OUT temp. readings (°F/°C)

Heat index and dew point readings

Low battery icon for sensor

USB charging port for mobile devices

•Sits on desktop or tabletop

•5.0V AC adapter (included) OR optional 3 "AAA" Alkaline batteries (not included)

Function Buttons

Sensor

Battery Cover

Sensor

Battery

Compartment

2 “AA”

SENSOR

TX-141TH-B

LED

Button

FRONT

VIEW

Buttons

Model: T83653 www.lacrossetechnology.com/support Page | 4

Program Menu (set 12/24 hour, time, calendar, °F or °C)

The program menu allows you to select your preferences:

12/24-Hour Time Format

Hour

Minutes

Year

Month

Date

Celsius/Fahrenheit

Program menu buttons:

1. Hold the SETTINGS button to enter time set mode.

2. To adjust values press the DOWN or UP ARROW buttons.

3. Press the SETTINGS button to confirm adjustments and move to the next item.

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.

Note: When in 12-hour format, AM or PM will show in front of the hour.

1. Hold the SETTINGS button for three seconds to enter time set mode.

2. 12H will flash.

3. Use the ARROW buttons to choose 12-hour or 24-hour time format.

4. Press the SETTINGS button to confirm, and move to set time.

Set Time

Set the time manually:

1. The hour digit will flash.

2. Use the ARROW buttons to choose the hour.

3. Press the SETTINGS button to confirm and move to minutes.

4. The minutes will flash.

5. Use the ARROW buttons to choose the minutes.

6. Press the SETTINGS button to confirm and move to set calendar.

Set Calendar

Set the calendar:

1. The year will flash.

2. Use the ARROW buttons to choose the year.

3. Press the SETTINGS button to confirm and move to the month.

4. The month will flash.

5. Use the ARROW buttons to choose the month.

6. Press the SETTINGS button to confirm and move to the date.

7. The date will flash.

8. Use the ARROW buttons to choose the date.

9. Press the SETTINGS button to confirm and move to Fahrenheit/Celsius.

Note: The day of the week will set automatically once the year, month and date are set.

Fahrenheit/Celsius

1. °F or °C will flash.

2. Use the ARROW buttons to select Fahrenheit or Celsius.

3. Press and release the SETTINGS button to confirm and exit the program menu.

Model: T83653 www.lacrossetechnology.com/support Page | 5

Note: When no buttons are pressed for ten seconds, the forecast station will save the last change

and default back to a normal time display.

Alarm Time

Time alarm buttons:

1. Hold the TIME ALARM button to enter alarm set mode.

2. To adjust values press the DOWN or UP ARROW buttons.

3. Press the TIME ALARM button to confirm adjustments and move to the next item.

Set Time Alarm

1. Hold the TIME ALARM button for three seconds to enter alarm set mode.

2. The hour will flash and the word ALARM will flash above the hour.

3. Use the ARROW buttons to set the hour.

4. Press the TIME ALARM button to confirm and switch to minutes.

5. The minutes will flash.

6. Use the ARROW buttons to set the minutes.

7. Press TIME ALARM button to confirm.

8. Press the SETTINGS button to return to normal mode

Note: When no buttons are pressed for ten seconds, the forecast station will save the last change and

default back to normal mode.

Activate/Deactivate Time Alarm

In normal mode, press and release the TIME ALARM button once to show alarm time.

Press and release the TIME ALARM button repeatedly to activate/deactivate the alarm.

The bell icon appears when alarm is activated.

Note: The alarm will ring for 2 minutes then turn off if no buttons are pressed.

Snooze

When the alarm sounds, press the HI/LOW/OFF button to snooze the alarm for 10 minutes.

The snooze option can be repeated three times.

The alarm bell icon will flash while the snooze feature is active.

Note: While the alarm sounds, any button except the TIME ALARM button will turn the alarm off.

USB Charge Port

Charge a smart phone, camera or other devices when the forecast station is plugged into a

power outlet with the included 5V AC adapter.

Note: This is a power-output charging port. It does not supply power to the projection alarm.

Connect your external device’s USB charging cable (not included) to the USB charging port.

Charging times will vary.

USB Power Output: 1A maximum current. Charge 1A devices or devices that are self-regulating.

Note: Some USB cables are for data transfer only and cannot be used for charging. Make sure that the

USB cable you use will charge your device. Most USB cables included with mobile devices will work for

charging.

Model: T83653 www.lacrossetechnology.com/support Page | 6

Backlight

AC Adapter

The backlight is always on when operating the forecast station with the 5-volt AC adapter. The backlight

has three settings: High, Low and OFF for your comfort.

HIGH: The backlight will default to HI at setup when the adapter is in use.

LOW: Press and release the HI/LOW/OFF button to dim the backlight.

OFF: Press and release the HI/LOW/OFF button again to turn the backlight off.

Note: When the AC adapter is NOT in use, the HI/LOW/OFF light feature is not available.

Note: When the backlight is off, press any button to activate the backlight for 10 seconds.

Battery Power

When operating on battery power only, press and release any button and the backlight will show for 10

seconds.

Temperature Alerts

Note: Setting the temperature alerts are separate from turning the alerts ON or OFF.

Temperature alert buttons:

1. Hold the TEMP ALERTS button until the station beeps.

2. The temperature alert value will blink in set mode.

3. To adjust alert values press the DOWN or UP ARROW buttons.

4. Press the TEMP ALERTS button to confirm & move to the next alert.

Select Temperature Alert Values

Temperature Alert values will flash individually in the outdoor or indoor temperature area when selected

to be set. The alert is not active just from selecting the value.

Hold the TEMP ALERT button for five seconds to select and set temperature alert values. To skip an alert

value and move to the next, simply press the TEMP ALERT button again.

1. OUTDOOR HI alert will flash.

2. Press the ARROW buttons to set the alert value.

3. Press the TEMP ALERT button to confirm and switch to OUTDOOR LO setting.

4. OUTDOOR LO alert will flash.

5. Press the ARROW buttons to set the alert value.

6. Press the TEMP ALERT button to confirm and switch to INDOOR HI setting.

7. INDOOR HI alert will flash.

8. Press the ARROW buttons to set the alert value.

9. Press the TEMP ALERT button to confirm and switch to INDOOR LO setting.

10. INDOOR LO alert will flash.

11. Press the ARROW buttons to choose the value.

12. Press the TEMP ALERT button to confirm and exit.

Note: After selecting temperature alert values, use the next step to turn arm or disarm alerts.

One or all of the HI and LO temperature alerts may be set.

Range for indoor temperature alert: +32°F to +122°F (0°C to 50°C)

Range for outdoor temperature alert: -40°F to 140°F (-40°C to 60°C)

Model: T83653 www.lacrossetechnology.com/support Page | 7

Arm/Disarm Temperature Alerts

From a normal time display, press the TEMP ALERT button to view alerts in the window TEMP. ALERT.

UP ARROW arms temperature alerts.

DOWN ARROW disarms temperature alerts.

ALERT BELL ICON appears when armed.

Note: When no temperature alerts are set, the Temperature Alert area will show ALERTS OFF.

1. In normal time mode, hold then release the TEMP ALERT button to toggle between:

oOutdoor HI

oOutdoor LO

oIndoor HI

oIndoor LO

2. Press the UP ARROW button to arm the selected alert.

3. The alert icon appears when alarm is activated.

4. Press the DOWN ARROW button to disarm the selected alert.

Active Alert

Beeps once per minute with flashing alert bell icon.

Press any button to stop the alert.

Weather Forecast Icons

The forecast station predicts weather condition of the next 12 hours based on the change of atmospheric

pressure with 70-75% accuracy. As weather conditions cannot be 100% correctly forecasted we are not

responsible for any loss caused by an incorrect forecast.

INTELLIGENT WEATHER FORECAST

This station learns. Please allow 3 to 4 weeks for barometric calibration. This will ensure an accurate

personal forecast for your location.

The forecast station samples the barometric pressure every twelve minutes.

These samples are averaged hourly and daily then stored in nonvolatile memory.

The three hour pressure icon change is based off of the last four average hourly readings.

As the forecast station builds memory, it will compare the current average pressure to the past forty day

average pressure for increased accuracy. The longer the forecast station operates in one location, the

more accurate the forecast icons will be.

Model: T83653 www.lacrossetechnology.com/support Page | 8

RISING

STEADY

FALLING

Forecast Trend Arrows

In the upper right corner of the forecast display, you can see forecast trend arrows that indicate the rising

or falling pressure trend.

The up trending arrow indicates the weather is improving.

The down trending arrow indicates the weather may worsen.

When there is no arrow, the pressure is steady.

Temperature Trend Arrows

The temperature (2°F/1°C) and humidity (3% RH) trend indicators update every 30 minutes or less.

Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At 1:30pm, the

arrow will indicate the temperature change since 10:30am.

Temperature has risen in the past 3 hours.

Humidity has risen in the past 3 hours.

Temperature has not changed in 3 hours.

Humidity has not changed in 3 hours.

Temperature has fallen in the past 3 hours.

Humidity has fallen in the past 3 hours

MIN/MAX Temperatures

The forecast station provides the daily minimum and maximum temperatures each day starting at

midnight (12:00 AM). The forecast station automatically resets the min/max temperatures at midnight

(12:00 AM).

View MIN data: Press and release the MIN TEMP button to view the minimum Indoor and Outdoor

Temperatures.

Reset MIN data: Hold the MIN TEMP button for five seconds and the Indoor and all Outdoor

Minimum Temperatures will be reset. The temperature area will show dashes briefly then return to

current temperatures.

View MAX data: Press and release the MAX TEMP button to view the maximum Indoor and Outdoor

Temperatures.

Reset MAX data: Hold the MAX TEMP button for five seconds and the Indoor and all Outdoor

Maximum Temperatures will be reset. The temperature area will show dashes briefly then return to

current temperatures.

Heat Index and Dew Point Temperature

Heat Index

Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot it feels to

a human being. As humidity increases, the body is unable to cool effectively; therefore, the temperature

will feel warmer.

View Heat Index: From a normal display, press the HEAT/DEW button once and Heat Index will show

instead of the outdoor ambient temperature.

Note: Heat index will be the same number as the temperature until the outdoor temperature is above 80

°F (26.7°C).

Model: T83653 www.lacrossetechnology.com/support Page | 9

Dew Point Temperature

Dew Point Temperature is the saturation point of the air, or the temperature to which the air has to cool in

order to create condensation. The higher the dew points, the higher the moisture content of the air at a

given temperature.

View Dew Point Temperature: From a normal display, press the HEAT/DEW button twice and Dew

Point will show instead of the outdoor ambient temperature. The words Dew Point will show near outdoor

temperatures.

Note: Dew Point is lower than the actual temperature.

Outdoor Temperature/Humidity Flashing

1. Low battery icon present in the outdoor temperature area:

Change batteries in the transmitter and press the TX button.

Hold the SENSOR SEARCH button for three seconds and the forecast station will search for the

outdoor transmitter again.

2. End of Transmission Range:

Move the transmitter closer to the forecast station.

Avoid obstructions in the signal path.

Keep transmitter and forecast station away from electronics.

Power the Forecast Station

AC Power Adapter

Insert enclosed 5-volt AC power adapter into a wall outlet, then into the forecast station.

Batteries:

1. Remove battery cover. Slide tab down and pull off to remove battery cover.

2. Install three new AAA batteries according to the polarity markings.

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries

Battery

Compartment

3 “AAA”

Battery Cover

AC Power Jack

BACK

VIEW

Model: T83653 www.lacrossetechnology.com/support Page | 10

If the forecast station does not display indoor temperature after 60 seconds, remove adapter and

batteries and wait for at least 60 seconds before repeating the setup process.

Install Batteries in the Outdoor Transmitter

1. Slide the battery cover down, then lift off the back of the transmitter.

2. Insert two new AA batteries into the transmitter. Observe the correct polarity.

3. Keep transmitter 5-10 ft. from the forecast station during setup.

4. After 15 minutes, if the outdoor temperature shows on the forecast station, you can

move the outdoor transmitter outside to a shaded location within range of the

forecast station.

Outdoor Transmitter Signal Reception

After the batteries are inserted, the forecast station will search for the outdoor temperature/humidity

transmitter for three minutes.

The antenna symbol will flash during reception and temperature display will be dashes “---“.

The strength signal icon will animate until the sensor signal is received or for 3 minutes if no signal

available.

Search for Transmitter

If the outdoor temperature is not displayed after three minutes, hold the SENSOR SEARCH button on

the forecast station for three seconds to search for the outdoor transmitter.

Next, remove the battery cover from the transmitter then press the TX button to

send a signal.

If it still does not receive the outdoor temperature, remove the AC cord and

batteries from both the forecast station and the transmitter for 15 minutes repeat

setup instructions from step 1.

Position the Forecast Station

Choose a location for the forecast station that is within range of the outdoor transmitter. The

forecast station has a built in base stand to sit on a table or desk.

Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,

televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.

Be aware of electrical wires and plumbing within a wall.

Best reception is achieved when the front or the back of the forecast station is facing the

outdoor transmitter. This allows a larger portion of the antenna to receive a signal.

Position the Outdoor Transmitter

Once the forecast station shows the outdoor temperature/humidity, place it and the transmitter in the

desired locations and wait approximately one-hour before permanently mounting the transmitter to ensure

that there is proper reception. The transmitter should be mounted vertically, in a shaded, protected area,

at least 6 feet from the ground to avoid damage and ensure accurate readings. The transmitter is water

resistant, not waterproof and should not be placed anywhere it will become submerged in water or subject

to standing water or snow. To achieve a true temperature/humidity reading, mount where direct sunlight

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS7059 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9611U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6304 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology V21V3 Abmessungen

La Crosse Technology

La Crosse Technology T83646v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-7078TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8157U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TX Abmessungen

La Crosse Technology

La Crosse Technology WS-7395U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2315CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6835 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9626U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1416v2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83100 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 512-807 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2510 Schulungshandbuch

La Crosse Technology

La Crosse Technology T83646 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50-C78861 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1517U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9711U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Weather Direct WD-3303 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung