La Crosse Technology C83332 Bedienungsanleitung

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 1

Model: C83332/C83349

Instruction Manual

DC: 121314

WIRELESS COLOR WEATHER STATION

Mold Risk for Weather Station & Indoor Remote Sensor Location

Button Press

for Mold Risk

Indicator When

Using Remote

Sensor Indoors

Remote

Humidity &

Temperature

with Trend

Time

Button Press

for Mold Risk

Indicator for

Weather

Station

Indoor

Humidity &

Temperature

with Trend

Calendar +

Alarm

Color Animated Forecast with Tendency

IN/OUT Temperature

Alerts

Battery

Compartment

3 “AAA”

Base

Stand

AC Power

Jack

Sensor

Battery

Compartment

2 “AA”

LED

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 2

Quick Setup

Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into the weather station.

Step 2: Insert 3 new AAA Alkaline batteries (included) into the weather station. Observe the

correct polarity.

Step 3: Insert 2 new AA batteries (included) into the TX141TH-B remote sensor. Observe the

correct polarity. The red LED will flashes during transmission.

Restart: If there is no remote temperature data after 3 minutes, unplug the AC adapter and

remove batteries from the weather station & remote sensor for 15 minutes. Return to Step 1.

Table of Contents

WIRELESS COLOR WEATHER STATION ......................................................................1

Quick Setup ...............................................................................................................2

Table of Contents.......................................................................................................2

Introduction ..............................................................................................................3

Features ....................................................................................................................3

Detailed Setup: Weather Station and Remote Sensor ................................................4

Button Functions .......................................................................................................4

▼(Down) Button: ........................................................................................................4

TIMESET Button: ..........................................................................................................5

SNOOZE/LIGHT (HI-LOW-OFF) Button:............................................................................5

HEAT/DEW/SENSOR SEARCH button ...............................................................................5

▲(UP) Button: ............................................................................................................5

ALERT Button:..............................................................................................................5

ALARM Button: .............................................................................................................5

Set Time, Date, Temperature Unit..............................................................................6

WWVB Reception ON/OFF ..............................................................................................6

Time Zone ...................................................................................................................6

Daylight Saving Time Indicator.......................................................................................6

12-hour or 24-hour Time Format ....................................................................................7

Set Time .....................................................................................................................7

Set Calendar ................................................................................................................7

Fahrenheit/Celsius ........................................................................................................7

Temperature Alerts....................................................................................................7

Arm/Disarm Temperature Alerts .....................................................................................8

Temperature Alert Sounds .............................................................................................8

Alarm Set...................................................................................................................8

Deactivate Alarm ..........................................................................................................8

Snooze........................................................................................................................8

Indoor Comfort Display .............................................................................................9

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 3

Heat Index/Dew Point/Mold Risk Indicator ..............................................................9

Heat Index...................................................................................................................9

Dew Point Temperature .................................................................................................9

Mold Risk Indicator .......................................................................................................9

Temperature/Humidity Trend indicators ................................................................. 10

Search for Remote Sensor ....................................................................................... 10

MIN/MAX (View, Reset) .......................................................................................... 10

Animated Color Forecast Icons ................................................................................ 10

Forecast Tendency Indicators (Up, Right, Down Arrows) ........................................ 11

Manual WWVB Time Signal Search .......................................................................... 11

Remote Positioning and Use ....................................................................................12

Low Battery icon...................................................................................................... 13

Care and Maintenance ............................................................................................. 13

Specifications .......................................................................................................... 12

Warranty Information ............................................................................................. 13

FCC Statement ......................................................................................................... 14

Introduction

La Crosse Technology® introduces a Wireless Color Weather Station with precise, real-time backyard

weather. New –Monitor the mold risk for two separate areas using the indoor weather station and multi-use

remote sensor. Place the remote sensor outdoors to monitor backyard weather conditions, or use it indoors

to monitor high mold risk areas like in a crawl space or a basement. Animated color forecasts with trends

react to changing barometric pressure. Monitor the indoor comfort level. Monitor in/out temperature trends

with high and low alert settings. Measure in/out temperature and humidity with daily min/max records -- all

on one easy-to-read color display with adjustable brightness.

Features

12/24 hr. atomic time (manual setting)

Remote Sensor mold risk display when using sensor indoors (shows with button press)

Signal strength icon for sensor transmission

Remote humidity (%RH) with trend indicator

IN / OUT remote temperature (°F / °C) with trend

Animated forecast icons

Forecast tendency indicator

Customize IN / OUT temp. alerts (low / high) for weather station and remote sensor

Perpetual calendar (day / month / date / year)

Weather Station mold risk display (shows with button press)

Indoor comfort level based on humidity

Indoor humidity (%RH) with trend indicator

Indoor temperature (°F / °C) with trend

Back light control (high / low / off)

Time alarm

Heat index and dew point

Min. / max. temperature and humidity

Mold Risk (0, LOW, MED, HI)

Station and sensor low battery icon

Atomic reception indicator

Snooze / alarm icon

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 4

Detailed Setup: Weather Station and Remote Sensor

STEP 1:

Insert the 5-volt A/C power adapter into the designated area on the

back of the Weather station.

Plug the A/C power adapter into a wall outlet for continuous

backlight (ON/OFF), and dimmer feature.

STEP 2: (optional battery operation)

Slide tab to down and pull out to remove the battery cover.

Insert three new AAA Alkaline batteries into the back of the weather

station. Observe the correct polarity (see marking inside the battery

compartment).

The weather station will light up and show indoor temperature, humidity and

time.

(Backlight will illuminate for 8 seconds when using only battery power with a press/release of

the SNOOZE/LIGHT button)

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

STEP 3:

Ensure that the transmitter is within 10 feet of the Weather station.

Remove battery cover from transmitter. Slide the battery cover down and

lift off the front.

Insert two new AA batteries into the TX141TH-B transmitter. Observe the

correct polarity.

Within three minutes, the Weather station will show readings in the outdoor

temperature area on the LCD.

Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-

28.8°C).

Button Functions

▼(Down) Button:

Setting-

Press to decrease values during setting.

Hold 2 seconds to quickly adjust values.

Default Time Display-

Press to display minimum temperature/humidity.

Hold 2 seconds to clear minimum temperature/humidity memory.

Temperature Alert-

Press to disarm alerts

The weather station has 5 buttons across the top and 2 on the front.

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 5

TIMESET Button:

Default Time Display-

Press to start or stop a WWVB time signal search

Hold for 3 seconds to set time/calendar, etc.

SNOOZE/LIGHT (HI-LOW-OFF) Button:

Default Time Display-

Press to change the LCD backlight brightness. HI/LOW/OFF

Press to activate backlight for 10 seconds.(without adaptor)

Time Alarm-

Press to activate the snooze function when alarming

HEAT/DEW/SENSOR SEARCH button

Default Time Display-

Press once to view Heat Index.

Press twice to view Dew Point.

Press a third time to view Indicator for Indoor Mold Risk (weather station) and Remote Mold

Risk (sensor).

Hold to search for Remote sensor.

▲(UP) Button:

Setting-

Press to increase the values during setting.

Hold 2 seconds to quickly adjust values.

Default Time Display-

Press to view maximum temperature/humidity.

Hold 2 seconds to clear maximum temperature/humidity memory.

Temperature Alert-

Press to arm alerts

ALERT Button:

Default Time Display-

Press to toggle between Remote High Alert, Remote Low Alert, Indoor High Alert and Indoor

Low Alert.

Hold to enter Alert setting

ALARM Button:

Default Time Display-

Press once to show alarm time

Hold for 2 seconds enter alarm setting mode

Alarm Mode-

Press to activate or deactivate time alarm.

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 6

Set Time, Date, Temperature Unit

Hold the TIME SET button to enter time set mode.

1. Press the ▼or ▲buttons to adjust the values.

2. Press the TIME SET button to confirm adjustments and move to the next item.

Time Set Order:

1. WWVB time signal (On/Off)

2. Time Zone - 7 time zones

3. DST (Daylight Saving Time On/Off)

4. 12/24 hour time format

5. Hour

6. Minutes

7. Year

8. Month

9. Date

10. Fahrenheit/Celsius

Press the TIME SET button to exit, or wait 20 seconds without pressing buttons to return to the

normal time display.

WWVB Reception ON/OFF

The WWVB atomic time reception defaults to ON.

To turn the WWVB reception OFF:

1. Hold the TIME SET button for 5 seconds.

2. WWVB and ON will flash above the date.

3. Press and release the ▼or ▲buttons to turn this OFF if you do not want to receive the WWVB

time signal.

4. Confirm with the TIME SET button and move to the Time Zone.

Time Zone

This station offers seven time zones listed in letter format (default is EST):

AST Atlantic Time

EST Eastern Time

CST Central Time

MST Mountain Time

PST Pacific Time

AKT Alaskan Time

HAT Hawaiian Time

1. EST will flash above the date.

2. Press and release the ▼or ▲buttons to select a different Time Zone.

3. Confirm with the TIME SET button and move to Daylight Saving Indicator.

Daylight Saving Time Indicator

DST will default to the ON position as most of the country observes the DST change. If you live in

an area does not observe the DST change, switch this to the OFF position.

1. DST and ON will flash above the date.

2. Press and release the ▼or ▲buttons to turn DST to OFF.

3. Confirm with the TIME SET button and move to 12/24 hour time format.

WWVB

EST

TIME

ZONE

DST

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 7

12-hour or 24-hour Time Format

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.

Note: When in 12-hour format AM or PM will show in front of the hour.

1. 12H will flash in the time display.

2. Press and release the ▼or ▲buttons to select 24-hour time.

3. Confirm with the TIME SET button and move to Set Time.

Set Time

To set the time manually:

1. The hour digit will flash.

2. Press and release the ▼or ▲buttons to select the hour.

3. Press and release the TIME SET button to set the minutes.

4. The minute’s digit will flash.

5. Press and release the ▼or ▲buttons to select the minutes.

6. Confirm with the TIME SET button and move to Set Calendar.

Set Calendar

The date default of the weather station is 1. 1. 2014.

To set the calendar:

1. The year will flash.

2. Press and release the ▼or ▲buttons to set the year (between

years 2000-2039).

3. Press the TIME SET button again to confirm and to enter the month setting.

4. The month will flash.

5. Press and release the ▼or ▲buttons to set the month.

6. Press the TIME SET button again to confirm and enter the date setting.

7. The date will flash.

8. Press and release the ▼or ▲buttons to set the date.

9. Confirm all calendar settings with the TIME SET button to confirm and move to select

Fahrenheit/Celsius.

Note: The day of the week will set automatically once the year, month and date are set.

Fahrenheit/Celsius

1. °F will flash.

2. Press and release the ▼or ▲buttons to select Fahrenheit or Celsius.

3. Confirm with the TIME SET button and exit the program menu.

Temperature Alerts

The weather station offers individual, programmable high and low temperature alerts.

Hold the ALERT button for five seconds, until the weather station beeps, to select and set

temperature alert values. Each alert value will flash separately during alert set mode.

REMOTE HIGH alert will flash. Press the ▼or ▲buttons to set the alert value, and press the

ALERT button to confirm. Then press the ALERT button again switch to REMOTE LOW setting.

12H

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 8

REMOTE LOW alert will flash. Press the ▼or ▲buttons to set the alert value, and press the

ALERT button to confirm. Then press the ALERT button again switch to INDOOR HIGH setting.

INDOOR HIGH alert will flash. Press the ▼or ▲buttons to set the alert value, and press the

ALERT button to confirm. Then press the ALERT button again switch to INDOOR LOW setting.

INDOOR LOW alert will flash. Press the ▼or ▲buttons to choose the value, and press the

ALERT button to confirm and exit.

Note: After selecting temperature alert values use the next step to turn individual alerts ON or

OFF.

Arm/Disarm Temperature Alerts

In normal time mode, press and release the ALERT button to toggle between:

oRemote HI

oRemote Lo

oIndoor HI

oIndoor LO

Press the ▲button to arm the selected alert. The alert bell appears when each alarm is

activated.

Press the ▼button to disarm the selected alert.

OFF will show in the Alerts area if no alert is active.

Temperature Alert Sounds

When temperature alert sounds, the corresponding alert bell will flash.

The alert beeps once every minute, until the temperature is out of alert range.

Press any button to stop alert. The alert bell will still show.

Disarm Alert: In normal mode, hold and release the ALERT button to select the alert to

disarm. With HI or LO alert selected, press the ▼button disarm alert.

Alarm Set

Hold the ALARM button for 5 seconds to enter the alarm time set mode.

1. The alarm hour digit will flash in the time display.

2. Press and release the ▼or ▲buttons to select the hour.

3. Press and release the TIME SET button to set the minutes. The minute digits will flash.

4. Press and release the ▼or ▲buttons to select the minutes.

5. Confirm with the TIME SET button and exit.

6. The bell icon will show next to the weekday indicating the alarm is active.

7. The bell icon will flash when the alarm is sounding.

Deactivate Alarm

1. Press and release the ALARM button once to show alarm time.

2. Press and release the ALARM button to deactivate the Alarm.

3. The bell icon will disappear indicating the alarm is no longer active.

Snooze

1. When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm for 10

minutes. The snooze icon Zz will flash by the weekday when the snooze feature is active.

2. To stop alarm for one day, press ALARM button, while in snooze mode. The bell icon will

remain solid.

Note: When the alarm sounds, it continues for 2 minutes and then shuts off completely.

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 9

Indoor Comfort Display

The indoor comfort display is based off of the humidity read by the weather station. Air that is too

dry or too wet can cause discomfort. The weather station will automatically display the indoor

comfort of your home with a simple statement:

Heat Index/Dew Point/Mold Risk Indicator

The HEAT/DEW button toggles between Heat Index, Dew Point, and Mold Risk.

Each feature will display for 10 seconds then return to defualt disply is the button

is not pressed again.

Heat Index

Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot

it feels to a human being. As humidity increases, the body is unable to cool effectively; therefore,

the temperature will feel warmer.

View Heat Index: From a normal display, press the HEAT/DEW button once and Heat Index will

show in place of the remote temperature.

Note: Heat index will be the same number as the temperature until the remote temperature is

above 80 °F (26.7°C).

Dew Point Temperature

Dew Point Temperature is the saturation point of the air, or the temperature to which the air has

to cool in order to create condensation. The higher the dew points, the higher the moisture

content of the air at a given temperature.

View Dew Point Temperature: From a normal display, press the HEAT/DEW button twice and

Dew Point will show place of the remote temperature.

Note: Dew Point is lower than the actual temperature.

Mold Risk Indicator

Mold Risk is based on temperature and humidity. Monitor the mold risk for two separate areas

using the indoor weather station and multi-use remote sensor. Place the remote sensor outdoors

to monitor backyard weather conditions, or use it indoors to monitor high mold risk areas like in a

crawl space or a basement.

View Mold Risk Indoor and Remote locations: From a normal display, press the HEAT/DEW button

three times and the Mold Risk will show next to the remote and indoor humidity.

1%-25%26%-39%

40%

-75%

76%-83%

83%-99%

Model: C83332/C83349 www.lacrossetechnology.com/support Page | 10

Temperature/Humidity Trend indicators

The indoor and outdoor temperature/humidity trend indicators will update every 30 minutes or

less. These trends represent temperature changes over the past three hours.

Example: At 1:00pm, the arrow indicates the change in temperature since 10:00am. At 1:30pm,

the arrow will indicate the temperature change since 10:30am.

Temperature has risen in the past 3 hours.

Humidity has risen in the past 3 hours.

Temperature has not changed in the past 3 hours.

Humidity has not changed in the past 3 hours.

Temperature has fallen in the past 3 hours.

Humidity has fallen in the past 3 hours.

Search for Remote Sensor

Hold the HEAT/DEW button to search for the remote sensor.

The strength signal icon will animate until the sensor signal is received or for 3

minutes if no signal available.

MIN/MAX (View, Reset)

The Weather station provides the daily minimum and maximum temperatures each day

starting at midnight (12:00 AM). The Weather station automatically resets the min/max

temperatures at midnight (12:00 AM).

View MIN data: Press and release the ▼button to view the minimum Indoor and Remote

Temperatures.

Reset MIN data: Hold the ▼button for five seconds and the Indoor and Remote Minimum

Temperatures will be reset.

View MAX data: Press and release the ▲button to view the maximum Indoor and Remote

Temperatures.

Reset MAX data: Hold the ▲button for five seconds and the Indoor and all Remote Maximum

Temperatures will be reset.

Note: The temperature areas will show dashes briefly then return to current temperatures.

Animated Color Forecast Icons

Animated forecast icons use changing atmospheric pressure to predict weather conditions for the

next 12-hours with 70-75% accuracy.

INTELLIGENT WEATHER FORECAST

This station learns; please allow 3 to 4 weeks for barometric calibration. This will ensure an

accurate personal forecast for your location.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 308-1409B Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50-C78861 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX2000 Discovery Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9520U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9740U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414W Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TX Bedienungsanleitung

La Crosse Technology

La Crosse Technology S84107 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7220U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C85845 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9035TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology C83349 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S82967 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8015U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6212 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7220U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7208TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS7059 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung