Labnet 25 Bedienungsanleitung

Operating Instructions

Labnet

Benchtop Rocker

Model 25/25D

Table of Contents

Introduction 1

Warranty 2

Specifications 3

Unpacking and Installation 3

Operation 4

Safety Precautions 4

Care and Maintenance 5

Accessories 5

Where to Call 5

Notes

Reproduction without prior written permission is prohibited.

Information contained herein subject to change without notice.

Care and Maintenance

After each use, the Model 25/25D Benchtop Rocker should be wiped

down with a soft, damp cloth. Do not immerse the rocker in water or

pour liquids over the unit as electrical shock may occur.

Accessories

The following accessories are available for the Model 25/25D

Benchtop Rocker:

Extra Rocking platform* with securing hardware S-2025P

Platform tie downs S-2025B

*Used to convert single platform unit to double platform unit. (Unit

can not be used with more than two platforms.)

Items may be ordered through you local Labnet International dealer

or by calling Labnet’s Customer Service Department at 732 417-

0700 (fax 732 417-1750).

Where to Call

If you have a question about the Model 25/25D Benchtop rocker con-

tact Labnet International’s Customer Service Department at 732 417-

0700, Monday through Friday, 8:30am to 5:30pm, EST.

For service inquiries, contact Labnet International’s Service Depart-

ment at 732 417-0700, Monday through Friday, 9:00am to 5:00pm,

EST. Before returning a unit for service, a Return Authorization (RA)

number must first be obtained from the service department. Equip-

ment sent in without prior authorization will be returned at the

customer’s expense.

If the unit must be returned to Labnet International for servicing, it

should be sent in the original packaging. If this is not possible, be

sure that the unit is sufficiently packed. Any damage resulting from

improper packaging is the responsibility of the customer. A written

explanation should accompany the unit along with the return autho-

rization number.

Introduction

The Model 25/25D Benchtop Rocker is intended for general purpose

applications requiring constant rocking. The rocker can be used in

environments from 4º to 80ºC. This allows for cold room use as well

as incubated applications.

The rocking platform is covered with a nonslip rubber mat to provide

stability. Plates, dishes and other sample containers may be placed

on its surface. The degree of tilt the platform achieves while rocking

is fixed at ±12mm (4.5º). The number of tilts per minute can be var-

ied from 0 to 40 as required to suit particular applications.

The Model 25/25D Benchtop Rocker is constructed of heavy gauge

steel. This provides the rocker with a stable base for vibration free

operation. The maximum load the rocking platform can carry is 5kg

(11lbs).

The Model 25/25D Benchtop Rocker is available with either a single

or double platform. In the double platform version, the second plat-

form attaches to the first platform by means of metal rods. The clear-

ance between the two platforms is 89mm (3.5”).

Read this instruction manual thoroughly before attempting to operate

the Model 25/25D Benchtop Rocker. All persons operating this piece

of equipment should review the Safety Precautions section of this

manual.

the four screws into the corner holes of the upper platform. Screw

the legs onto the threads of the screws. Place the threaded portion

of the legs through the corner holes of the bottom platform. Screw

the mount knobs onto the underside of the lower platform.

Plug the power cord into a grounded wall socket. The Model 25/

25D Benchtop Rocker is now ready for use.

Operating the Model 25/25D Benchtop Rocker

To begin operation of the rocker, turn the power switch, located on the

right side of the front panel, to the “on” position. Adjust the speed dial

to the desired setting. To stop operation, turn the power switch to the

off position. The nonslip rubber pad on the platform surface is de-

signed to keep objects in place, However, it may be useful to hold

down lighter objects with platform tie downs (sold separately). See

the Accessories Section of the manual for ordering information.

Note: To avoid splashing of samples, the rocker should be started

with the speed dial at the lowest position and gradually turned up to

the desired speed.

Safety Precautions

The following precautions should be taken when operating or work-

ing near the Model 25/25D Benchtop Rocker:

Never operate the rocker without a platform securely

attached.

Always wear shatterproof eye protection.

Always make certain that the platform and any hardware are

secure before operating the shaker.

Load the rocker symmetrically. Unbalanced loads should

be avoided.

Solvents and flammables should not be used on or near the

shaker.

Service and repair must only be performed by qualified

professionals.

Hazardous samples should be shaken only in appropriate

containment vessels.

Warranty

Labnet International guarantees that the Model 25/25D Benchtop

Rocker you have received meets its published specification. The

Model 25/25D Benchtop Rocker is guaranteed to be free of defects in

materials and workmanship for a period of one year from the date of

purchase. This guarantee is valid only if the unit has been used in

accordance with the instructions in this manual and for its intended

purpose. Labnet International shall not be responsible for consequen-

tial damages or damages resulting from the abuse or misuse of this

equipment. Labnet International’s liability shall be limited to the repair

or replacement of the unit or refund of the purchase price, at Labnet

International’s discretion.

In the event that service is required, Labnet International’s Service

Department must first be contacted to receive a return authorization

number.

Labnet International reserves the right to alter the specification of the

Model 25/25D Benchtop Rocker without notice. This allows the in-

corporation of improvements as they are developed.

Please fill in the following information. This information will be re-

quired in the event that service becomes necessary.

Serial Number _________________________________

Date of Purchase _______________________________

Specifications

Shaking speed 0 to 40 tilts per minute

Operating Environment 4º to 80ºC

Platform Dimensions 280 x 200mm

Rocking Motion Fixed, ±7°

Maximum Load 5kg (11lbs)

Clearance between platforms 89mm

(Double platform unit only)

Voltage Requirements 120V/60Hz

Unpacking and Installation

Upon receipt of the Model 25/25D Benchtop Rocker, examine the

exterior carton for damages. In the event of shipping damage, a claim

must be filed with the transportation carrier within 10 days.

Carefully unpack the unit and check for completeness. Included in

the carton should be the following:

Rocker with platform(s)

Instruction Manual

Warranty Card

If any of these items are missing, contact Labnet International’s Cus-

tomer Service Department immediately.

Save the original packaging until the unit has been shown to be oper-

ating properly.

Verify that the unit is rated for the proper voltage by checking the

panel on the back. Check that the proper power cord has been re-

ceived. The serial number is also found on the back panel. Make

note of the serial number in the space provided in the Warranty sec-

tion of this manual.

The Model 25/25D Benchtop rocker should be located on a level,

stable surface near a grounded electrical outlet. Allow sufficient clear-

ance on all sides of the unit, at least 3 inches, for proper ventilation.

Ensure that the platform will not touch other objects while in opera-

tion.

If the unit is supplied with an optional upper platform, it should be

installed at this time. To install the platform, separate the platform

standoffs into their three pieces - screws, leg and mount knob. Insert

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Labnet Laborausrüstung Handbücher

Labnet

Labnet MultiGene OptiMax Thermal Cycler Bedienungsanleitung

Labnet

Labnet Orbit S2030-LS-B Bedienungsanleitung

Labnet

Labnet W1106A Bedienungsanleitung

Labnet

Labnet 35 Bedienungsanleitung

Labnet

Labnet BioPette PLUS Bedienungsanleitung

Labnet

Labnet ProBlot Rocker 25 Bedienungsanleitung

Labnet

Labnet BioPette A Series Bedienungsanleitung

Labnet

Labnet Spectrafuge C1301 Bedienungsanleitung

Labnet

Labnet ENDURO VE10 Bedienungsanleitung

Labnet

Labnet Rocker 35 EZ Bedienungsanleitung

Labnet

Labnet H5500 Bedienungsanleitung

Labnet

Labnet BioPette Multichannel Bedienungsanleitung

Labnet

Labnet Orbit S2020-P4-B Bedienungsanleitung

Labnet

Labnet Spectrafuge 6C Bedienungsanleitung

Labnet

Labnet C1601-B Bedienungsanleitung

Labnet

Labnet AccuPlate D0400 Bedienungsanleitung

Labnet

Labnet Spectrafuge 16M Bedienungsanleitung

Labnet

Labnet ProBlot 6 Bedienungsanleitung

Labnet

Labnet ProBlot Rocker 25 Bedienungsanleitung

Labnet

Labnet 222DS Bedienungsanleitung

Labnet

Labnet I-4001-HCS Bedienungsanleitung

Labnet

Labnet Spectrafuge 24D Bedienungsanleitung

Labnet

Labnet Excel E10-1 Bedienungsanleitung

Labnet

Labnet MPS 1001 Mini Plate Spinner Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung