- 1 -
CHAPTER2.SET-UP:-
2.1GettingtheMicroscopeReadyForUse:-
First,familiarizeyourselfbothvisuallyandphysicallywiththemechanicalpartsofyourmicroscope.Gentlyoperate
eachpartbyhand(notoolsrequired)toseehowitbehavesandwhatresultitproduces.
2.2MountingtheObjectiveandEyepiece:-
To put the eyepiece in place simply slide it into the eyepiece tube. The objective lenses screw into the rotating
nosepiece. If the four objectives are already mounted in the nosepiece, check to see if they are tightly held in
their place. To do this, grip the knurled ring on the objectives with your fingers and turn it to the right. Do not
tighten them with tools, they need only to be "finger tight". With all four objectives mounted in the nosepiece
the entire nosepiece can be rotated by hand.As you rotate the nosepiece you will notice that each objective
lens has a "click stop" which stops and holds the objective lens being used in its proper position relative to the
opticalaxisofthemicroscope.
2.3Illumination:-
In order to provide illumination for your new microscope, simple plug the power cord into an electrical socket
andswitchyourmicroscope"ON",andyouarereadytobeginyourwork.
CHAPTER 1. SPECIFICATIONS:-
Magnification: 40X, 100X, 400X, 1000X.
Viewing Angle: Compensation free binocular head inclined at 45°, 360°rotatable.
Eyepiece: WF10X 18mm.
Interpupil Distance: 55mm-75mm
Illumination: Built-in 85V-230V, 6V/30W Halogen tungsten lamp and adjustable brightness.
Condenser: Abbe N.A.1.25 condenser with iris diaphragm & filter.
Stage: Double layer mechanical stage.
Stage Size: 140mm X 140mm.
Moving Range: 75mm X 50mm.
Objective: 4X, 10X, 40X (S), 100X (S, Oil).
Focusing: Coaxial coarse and fine focus adjustment.
Fine focusing scale value: 0.002mm
Catalog No.: 39480104
