Labomed Sigma Bedienungsanleitung

To ensure proper use of this instrument as well as to avoid injury while operating

instrument, understanding this manual completely before use is highly recommended.

LABOMED

User Manual

Educational Microscopy

sigma

CONTENTS

8 ASSEMBLY 11

1 11 TROUBLESHOOTING GUIDE 5

1 12 SPECIFICATIONS 6

10 DETAILED OBSERVATION PROCEDURE 13-14

9 SUMMARY OF BRIGHTFIELD OBSERVATION PROCEDURE 12

7 INITIAL SETUP 10

6 OPTIONAL ACCESSORIES -98

5 STANDARD COMPONENTS 7

4 SYSTEM DIAGRAM 6

3 UNPACKING YOUR MICROSCOPE 5

2 SAFETY INFORMATION 2-4

1 INTRODUCTION 1

The Sigma is an educational microscope reflecting a modern design as well as the latest in optical and mechanical

advancements.

Designed for professionals as well as students, this microscope offers many features and functions for a diverse set of

applications.

Extra clarity and contrast is provided through an integrated monocular tube, inclined at 45°.

The pressure die cast stand housed in plastic covers consists of Ball bearing ‘friction less’ sideways focusing to avoid any loss

in motion. The coarse and fine focusing is CAM driven for fatigue free operation.

The sturdy new stylish design provides comfort as well as stability.

The high powered objectives are spring loaded to prevent accidental damage to specimen slides.

The quadruple nosepiece has a comfortable ribbed grip for easy rotation that also safeguards the turret system against any

damage. All positions are par-centered and par-focalised ensuring the highest level of accuracy.

The LED illumination is operational with an in-built rechargeable battery P/N 2124000-901.The battery is rechargeable with

an external adapter with a Universal Power Supply operating at 100V-240V AC input. This ensures continuous operation

even under fluctuating voltages.

Our LED has an average life span of up to 100,000 hours.

INTRODUCTION

Fig. 1

1. After the microscope has been used for observation of a specimen

containing bacteria, clean all parts coming in contact with the specimen

to prevent infection.

?Be sure to remove the specimen before moving this product.

?In case the specimen is damaged by erroneous operation, it is

important to clean all surfaces that may have come in contact with

the specimen.

2 To avoid potential shock hazards and burns when replacing LED, turn

the microscopes main switch to the OFF position and disconnect the

charger from the wall outlet in advance. Whenever you replace LED

during use or right after use, allow the lamp socket to cool before

touching (Fig. 1)

Applicable LED replacement: LED P/N 2124000-950

3. Install the microscope on a sturdy, level table or bench. Do not place the microscope on a flexible surface, as this

could result in overheating/fire.

4. Always use the charging adapter provided by LABOMED. If the proper charging adapter is not used, product safety

performance cannot be warranted.

5 When installing the microscope, route the charging adapter away from the microscope frame. Should the charging

adapter come in contact with the microscopes base, the charging adapter could short.

6 After operation of microscope has ceased, be sure to disconnect the charging adapter from the connector on the

microscope or from the wall power outlet.

Safety Symbols

Symbol Explanation

Indicates that the surface has a tendency to heat up and should not be touched unless

system has completely cooled down.

Before use, carefully read the instruction manual. Improper use could result in

injury to the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates the risk of electric shock.

Indicates that the main switch is OFF.

The following symbols are found on the microscope. For optimal use, it is recommended that users understand

these symbols and always use the equipment as prescribed.

SAFETY INFORMATION

2Sigma

1Getting Ready

Fig. 2

2Caution

3Care & Maintenance

1. A microscope is a precision instrument with delicate glass components.

Please handle with care.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature, humidity, dust and vibrations. (For operating conditions,

see chapter 12, "SPECIFICATIONS" on Page 16)

3. The microscope is ventilated by natural convection. Be sure to leave

enough space (10 cm or more) around body when installing it.

To prevent damage, do not hold the microscope by the stage.

Be sure to remove the specimen from the stage clip while

transporting unit to avoid damage to slide.

If the microscope is used in a manner not specified by this manual, the safety of the user may not be warranted.

In addition, the equipment may also suffer damage. Always use the equipment as outlined in this instruction

manual.

Your microscope has been engineered for a long and safe operational life with the least amount of maintenance

required. In general, routine maintenance is limited to keeping the microscope working parts lubricated and optics

clean.Always cover the microscope with the provided dust cover when not in use.

1. Cleaning the lenses :

To clean the lens surfaces, remove dust using a soft brush or gauze (compressed air dust cans are ideal). For

removing finger marks or grease, soft cotton cloth/ lens tissue or gauze lightly moistened with cleaning solution

(85% petroleum ether and 15% isopropanol) should be used. For cleaning the objective optics, use xylene.

Observe sufficient caution in handling xylene.

Warning Label

Bottom of microscope

frame

A warning indication label is attached to every part where special precaution is required while handling and using

the microscope. Always read the warnings.

Warning label

position

[Warning against high temperature in

battery compartment]

[Warning against risk of electric shock]

[Warning against damage in non-

compliance with this manual]

If the warning label is stained or peeled off, contact your LABOMED distributor.

Cleaning procedure:

Place the objectives and/or eyepieces on a dust-free surface (e.g. fresh aluminum foil).All other optical components to

be cleaned should be as accessible as possible.

1. Blow all loose dust particles away with a dust blower.

2. Remove all water-soluble dirt with distilled water. If this is unsuccessful repeat using a solution of diluted hand

soap liquid. Remove any remaining residue with a dry cotton swab.

3. To remove oil, use a solution of diluted hand-soap liquid initially. If this does not produce a satisfactory result,

repeat the cleaning using a solvent (Optical Cleaning Solution 85% petroleum ether and 15% isopropanol).

4. Grease must always be removed using a solvent.

5. Cleaning is achieved by using a spiral motion from the center to the rim. Never wipe using zig-zag movements as

this will only spread the dirt. With larger optical surfaces (e.g. tube lenses) the spiral motion starts initially at the rim

before moving to the middle and is only then followed by a center to rim cleaning motion. Normally several spiral

wipes are recommended.

We recommend pure, volatile petroleum ether or Optical Cleaning Solution as explained in point 3 above.

Wipe using a spiral movement. Do not use a zig-zag motion!

2. Cleaning of painted surfaces :

Avoid the use of any organic solvent ( e.g. thinner, xylene, ether, alcohol etc.) for cleaning of painted surfaces of

the instrument. Painted surfaces can be cleaned with a very lightly moistened micro fiber cloth. Loose dust and

other dirt can be removed using a brush of soft hair used exclusively for this purpose.

3. Cleaning of plastic surfaces:

Sigma microscope frame is made up of special grade plastic which can be cleaned with mild soap solution. Do not

use acetone for cleaning stage condenser lens.

Caution:

Do not use aggressive organic solvent such as acetone for cleaning painted surfaces and plastic parts of

the microscope.

4. Never attempt to dismantle :

Never attempt to dismantle the instrument so as to avoid the possibility of impairing its operational efficiency and

accuracy.

5. Periodical checking :

To maintain the performance of the instrument, we recommend customers have their microscopes serviced

periodically by a factory authorized dealer/rep. For details, contact your nearest dealer or Labo America’s main

office in California.

zig-zag motion (X) spiral motion ( )

Sigma

UNPACKING YOUR MICROSCOPE

Power Adapter /

Battery charger

Microscope

Mechanical stage

(optional)

Slides (optional)

SYSTEM DIAGRAM

4Sigma

Integrated eyepiece with eye guard

Objectives

Stage clips

Coarse focusing knob

Fine focusing knob

STANDARD COMPONENTS

After opening the package, make sure that the correct units for the selected set are present.

LED Adapter

Integrated eyepiece

Objectives

Stage clips

Inhaltsverzeichnis

Andere Labomed Mikroskop Handbücher

Labomed

Labomed Prima Mu Bedienungsanleitung

Labomed

Labomed PRIMA Mm Bedienungsanleitung

Labomed

Labomed Lx 500 Bedienungsanleitung

Labomed

Labomed PRIMA DNT Trainer Bedienungsanleitung

Labomed

Labomed CxL Bedienungsanleitung

Labomed

Labomed Lx 300 Bedienungsanleitung

Labomed

Labomed TCM 400 Bedienungsanleitung

Labomed

Labomed PRIMA DNT Trainer Bedienungsanleitung

Labomed

Labomed CxL Bedienungsanleitung

Labomed

Labomed Lx 300 Bedienungsanleitung

Labomed

Labomed TCM 400 FLR Bedienungsanleitung

Labomed

Labomed Lx 500 Bedienungsanleitung

Labomed

Labomed MET 400 Bedienungsanleitung

Labomed

Labomed CZM6 Bedienungsanleitung

Labomed

Labomed CZM6 Bedienungsanleitung

Labomed

Labomed CxL Dark Field Kit Bedienungsanleitung

Labomed

Labomed Luxeo 2S Bedienungsanleitung

Labomed

Labomed TCM 400 Bedienungsanleitung

Labomed

Labomed PRIMA ENT Bedienungsanleitung

Labomed

Labomed Lx POL Bedienungsanleitung

Labomed

Labomed Luxeo 6z Bedienungsanleitung

Labomed

Labomed Prima OPH Bedienungsanleitung

Labomed

Labomed Luxeo 6z Bedienungsanleitung

Labomed

Labomed Lx 500 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung