Life Gear 93320 Bedienungsanleitung

Gentle Revolution,

Elliptical Transorbit

Item No.: 93320

Owner’s Manual

The specifications of this product may vary from this photo and are subject to change without

notice. 2014, Dec.

TABLE OF CONTENTS

WARRANTY-----------------------------------------------------------------1

SAFETY INSTRUCTIONS-----------------------------------------------2

ADJUSTMENTS------------------------------------------------------------3

OPERATING THE COMPUTER----------------------------------------3

PARTS LIST-----------------------------------------------------------------6

HARDWARE PACKING LIST------------------------------------------- 8

TOOLS------------------------------------------------------------------------9

OVERVIEW DRAWING-------------------------------------------------- 10

ASSEMBLY INSTRUCTIONS-------------------------------------------11

MAINTENANCE------------------------------------------------------------16

TROUBLESHOOTING----------------------------------------------------16

WARM UPAND COOL DOWN ROUTINE---------------------------17

ONE YEAR LIMITED WARRANTY

LifeGear Inc. warrants to the original purchaser that this product is free from defects in

material and workmanship when used for the purpose intended, under the conditions that it

has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's

obligation under this warranty is limited to replacing or repairing, free of charge, any parts

which may prove to be defective under normal home use. This warranty does not include

any damage caused by improper operation, misuse or commercial application.

From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.

This warranty is extended only to the original owner and is not transferable.

When ordering replacement parts please have the following information ready:

1. Owner's Manual

2. Model Number

3. Description of Parts

4. Part Number

5. Date of Purchase

SAFETY INSTRUCTIONS

Basic precautions should always be followed, including the following safety

instructions when using this equipment: Read all instructions before using this

equipment.

1. Read all the instructions in this manual and do warm up exercises before using this

equipment.

2. Before exercise, in order to avoid injuring the muscle, warm-up exercise of every

position of the body is necessary. Refer to Warm Up and Cool Down Routine page.

After exercise, relaxation of the body is suggested for cool-down.

3. Please make sure all parts are not damaged and fixed well before use. This

equipment should be placed on a flat surface when using. Using a mat or other

covering material on the ground is recommended.

4. Please wear proper clothes and shoes when using this equipment; do not wear clothes

that might catch any part of the equipment.

5. Do not attempt any maintenance or adjustments other than those described in this

manual. Should any problems arise, discontinue use and consult an Authorized

Service Representative.

6. Be careful when step on or leave the pedal always hold the handlebars first. Make the

pedal at your side at the lowest position, step on the pedal, and stride over the main

frame then step on the other pedal. When using, please hold the handlebar by hands,

make the pedals running smoothly by push or pull handlebars, then run the equipment

regularly by cooperation of hands and feet. After exercise, please also make one

pedal at the lowest position and leave your foot on the higher pedal first and then

another.

7. Do not use the equipment outdoors.

8. This equipment is for household use only.

9. Only one person should be on the equipment while in use.

10. Keep children and pets away from the equipment while in use. This machine is

designed for adults only. The minimum free space required for safe operation is not

less than two meters.

11. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop

exercising immediately and consult your physician before continuing.

12. The maximum weight capacity for this product is 110kgs.

WARNING:Before beginning any exercise program consult your physician.

This is especially important for the persons who are over 35 years old or who have

pre-existing health problems. Read all instructions before using any fitness

equipment.

CAUTION:Read all instructions carefully before operating this product.

Retain this Owner’s Manual for future reference.

ADJUSTMENTS

Adjusting the Tension Control Knob

To increase the load, turn the tension control knob in a clockwise direction.

To decrease the load, turn the tension control knob in a counterclockwise direction.

Adjusting the Adjustable Leveler

Turn the adjustable leveler on the rear stabilizer as needed to level the elliptical trainer.

OPERATING THE COMPUTER

SPECIFICATIONS:

TIME---------------------------------------------------- 0:00-99:59 MIN: SEC

SPEED ------------------------------------------------ 0.0-99.9 KM/H

DIST (DISTANCE) ---------------------------------- 0.00-9999 KM

CAL (CALORIES) -----------------------------------0.0-9999 KCAL

ODO (ODOMETER) --------------------------------0.0-9999 KM

(PULSE) ------------------------------------------ 40-240 BEATS/MIN

USING YOUR COMPUTER

The computer can be activated by pressing the buttons or by pedaling. If you leave the

equipment idle for approximate 4 minutes, the power will turn off automatically.

BUTTON FUNCTIONS:

MODE: Press the MODE button to select each function of computer.

Press and hold the MODE button for 3 seconds, all data values will clear to zero except the

ODO (ODOMETER) data values.

SET: Press the SET button to set data values of TIME, DISTANCE, CALORIES, or PULSE

for target pre-setting.

RESET: Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to

zero.

Press the RESET button to clear data values of TIME, DISTANCE, CALORIES, or PULSE to

zero for target pre-setting.

COMPUTER FUNCTIONS:

SCAN: Press the MODE button until the screen displays SCAN; the computer will

automatically scan the function of TIME, SPEED, DIST (DISTANCE), CAL (CALORIES),

ODO (ODOMETER), and (PULSE) every 6 seconds.

TIME: Displays your elapsed workout time in minutes and seconds. You may also pre-set

target time in STOP mode before training. To set TIME press the MODE button until you

see the TIME displays on the screen. Press the SET button to change the time, each time

you press the SET button TIME should change by 1 minute. Press the RESET button to

clear the target time to zero. The pre-set target time range is from 0:00 to 99:00 minutes.

Once you pre-set target time and then start to exercise, time starts counting down from

pre-set target time to 0:00 per 1 second backward. When the pre-set target time counts

down to 0:00, time will start to count up and the computer will begin beeping to remind

you.

SPEED: Display the current training speed.

DIST (DISTANCE): Displays the accumulative distance traveled during workout. You may

also pre-set target distance in STOP mode before training. To set DISTANCE press the

MODE button until you see the DIST displays on the screen. Press the SET button to

change the distance. Press the RESET button to clear the target distance to zero. The

pre-set target distance range is from 0.00 to 9999 km. Once you pre-set target distance

and then start to exercise, distance starts counting down from pre-set target distance to 0.00.

When the pre-set target distance counts down to 0.00, distance will start to count up and the

computer will begin beeping to remind you.

CAL (CALORIES): Displays the total accumulated calories burned during workout. You

may also pre-set target calories in STOP mode before training. To set CALORIES press

the MODE button until you see the CAL displays on the screen. Press the SET button to

change the calories. Press the RESET button to clear the target calories to zero. The

pre-set target calories range is from 0.0 to 9999 calories. Once you pre-set target calories

and then start to exercise, calories start counting down from pre-set target calories to 0.0.

When the pre-set target calories count down to 0.0, calories will start to count up and the

computer will begin beeping to remind you. (This data is a rough guide for comparison of

different exercise sessions and should not be used in medical treatment).

ODO (ODOMETER): Displays the total accumulative distance traveled. The data values of

ODO can not be clear to zero by pressing and holding the MODE or RESET button for 3

seconds. If you take out the batteries from the computer, the ODO data values will clear to

zero.

(PULSE): Displays your current heart rate figures after you grip the handlebar sensors

with both your hands during exercise. To ensure the pulse readout is more precise, please

always hold on to the handlebar grip sensors with two hands instead of just with one hand

only when you try to test your heart rate figures. You may also pre-set target heart rate in

STOP mode before training. To set PULSE press the MODE button until you see the

Pdisplays on the screen. Press the SET button to pre-set target heart rate. Press the

RESET button to clear the target heart rate to zero. Once you pre-set target heart rate and

then start to exercise, please grip the handlebar sensors with both your hands during

exercise. If the heart rate detected greater than the target heart rate, the computer will

begin beeping to remind you.

HOW TO INSTALL THE BATTERIES:

1. Remove the battery cover on the back of the computer.

2. Place two size AA batteries into the battery housing.

3. Insure batteries are correctly positioned and battery springs are in proper contact with

batteries.

4. Re-install the battery cover.

5. If the display is illegible or only partial segment appears, remove batteries and wait 15

seconds before reinstalling.

PARTS LIST

No. Description Qty No. Description Qty

001 Main Frame 30x60x2 1 028 Washer Ø6 6

002L Left Foot Bar 40x25x1.5 1 029 Bolt M6x40 6

002R Right Foot Bar 40x25x1.5 1 030 Tension Cable L=1800 1

003L Left Handrail Arm Ø32x1.5 1 031 Cap S13 2

003R Right Handrail Arm Ø32x1.5 1 032 Screw ST4.2x25 8

004L Left Handrail Ø32x1.5 1 033L Foot Bar Cover-A 2

004R Right Handrail Ø32x1.5 1 033R Foot Bar Cover-B 2

005 Front Post Ø50x1.5 1 034 Big Washer Ø28xØ9x1.5 2

006 Handlebar Ø28.6x1.5 1 035 Bolt Ø15.8x62.5xM8 2

007 Front Left Stabilizer End Cap 1 036 Left Foot Pedal 395x150x65 1

008 Front Right Stabilizer End Cap 1 037 Right Foot Pedal 395x150x65 1

009 Rear Left Stabilizer End Cap 1 038 Adjustable Leveler M10 2

010 Front Stabilizer Ø60x1.5x380 1 039 Nut M10 2

011 Rear Stabilizer Ø60x1.5x480 1 040 Handlebar Foam Grip

Ø33xØ27x360 2

012 Bolt M8x65 4 041 Bolt M8x15 8

013 Rear Right Stabilizer End Cap 1 042 Curve Washer Ø20xØ8 12

014 Bolt M8x62.5 1 043 Bolt M10x18 2

015 Cap Nut M8 4 044 Spring Washer Ø18xØ10x2 2

016L Bolt for left U Shape Bracket 1/2” 1 045 Washer Ø28xØ16.5x4x5 2

016R Bolt for right U Shape Bracket

1/2” 1 046 Powder Metal Bushing

Ø33xØ29xØ16x14x4 4

017L Left Nylon Nut 1/2” 1 047 Bolt M6x35 4

017R Right Nylon Nut 1/2” 1 048 Curve Washer Ø6 4

018 Wave Washer Ø28xØ17x0.3 2 049 Cap S16 2

019 Powder Metal Bushing

Ø24xØ16x14 8 050 Cap Nut M6 4

020 Spring Washer Ø20xØ13xB2 2 051 Plastic Bushing Ø32xØ16x5xØ50 2

021 Idle Wheel 1 052L Left HandrailArm Cover-A 1

022 Washer Ø40xØ24x3.0 1 052R Right Handrail Arm Cover-A 1

023 U Shape Bracket 2 053L Left HandrailArm Cover-B 1

024 Nylon Nut M8 6 053R Right Handrail Arm Cover-B 1

025 Washer Ø16xØ8x1.5 5 054 Tension Control Knob 1

026 Bolt M8x50 2 055 Screw ST2.9x12 10

027 Nylon Nut M6 6 056 Computer (HR-1583) 1

PARTS LIST

No. Description Qty No. Description Qty

057 Bolt M5x10 4 076 Washer Ø34.5xØ23x2.5 1

058 Hand Pulse Sensor 2 077 Hexagon Nut 7/8” 1

059 Handrail Foam Grip

Ø31xØ37x480 2 078 Belt Pulley with Crank 6.5”/Ø240 1

060 Spring Washer Ø8 6 079 Powder Metal Bushing Ø18xØ8.5 4

061 Handrail End Cap 2 080 M10x1 Nut for Flywheel 2

062 Handlebar End Cap Ø28.6x1.5 2 081 Flywheel Ø230x40x32 1

063 Screw ST4.2x20 8 082 Belt PJ370 J6 1

064 Curve Washer for Tension

Control Knob Ø20xØ5.2 1 083 Idle Wheel Bracket 1

065 Bolt for Tension Control Knob

M5x45 1 084 Bolt M8x20 2

066 Phillips Self Tapping Screw

ST4.2x25 6 085 Adjustable Bolt M8x85 1

067 Sensor Wire I L=1100 1 086 Adjustable Bolt M6x36 2

068 Sensor Wire II L=1600 1 087 Left Decorate Cover 1

069 Hand Pulse Sensor Wire L=750 2 088 Right Decorate Cover 1

070 Left Cover 632x366x84 1 089 Left Cover Cap 1

071 Right Cover 632x360x81 1 090 Right Cover Cap 1

072 Axle Bush 2 091 Spring Washer Ø6 2

073 Ball Bearing 2 092 U Bracket 2

074 Axle Sleeve I 15/16” 1 093 Nut M6 2

075 Axle Sleeve II 7/8” 1

HARDWARE PACKING LIST

(12) Bolt M8x65

4 PCS (15) Cap Nut M8

4 PCS

(16R) Bolt for right U Shape

Bracket 1/2” 1 PC

(17R) Right Nylon Nut 1/2” 1 PC

(18) Wave Washer

Ø28xØ17x0.3 1 PC

(20) Spring Washer

Ø20 xØ13xB2 1 PC

(16L) Bolt for left U Shape

Bracket 1/2” 1 PC

(17L) Left Nylon Nut 1/2” 1 PC

(18) Wave Washer

Ø28xØ17x0.3 1 PC

(20) Spring Washer

Ø20 xØ13xB2 1 PC

(27) Nylon Nut M6

6 PCS

(28) Washer Ø6

6 PCS (29) Bolt M6x40

6 PCS (31) Cap S13

2 PCS

(42) Curve Washer

Ø20xØ8

4 PCS

(47) Bolt M6x35

4 PCS (48) Curve Washer Ø6

4 PCS

(49) Cap S16

2 PCS (50) Cap Nut M6

4 PCS (55) Screw ST2.9x12

8 PCS

(63) Screw ST4.2x20

4 PCS

TOOLS

Allen Wrench 8mm

1 PC Allen Wrench 6mm

1 PC

Multi Hex Tool

1 PC Multi Hex Tool with Phillips Screwdriver

S8, S13, S14, S15

1 PC

Inhaltsverzeichnis

Andere Life Gear Ellipsentrainer Handbücher

Life Gear

Life Gear FORMULA 93586N Bedienungsanleitung

Life Gear

Life Gear 93580 Bedienungsanleitung

Life Gear

Life Gear 93385 Bedienungsanleitung

Life Gear

Life Gear 26560 Bedienungsanleitung

Life Gear

Life Gear 93590 Bedienungsanleitung

Life Gear

Life Gear CLASSIC PRO 93795 Bedienungsanleitung

Life Gear

Life Gear 26355 Bedienungsanleitung

Life Gear

Life Gear 93266 Bedienungsanleitung

Life Gear

Life Gear 93280 Bedienungsanleitung

Life Gear

Life Gear 93296 Bedienungsanleitung

Life Gear

Life Gear 93260 Bedienungsanleitung

Life Gear

Life Gear 93286 Bedienungsanleitung

Life Gear

Life Gear 93772 KNIGHT Bedienungsanleitung

Life Gear

Life Gear Swany 93460 Bedienungsanleitung

Life Gear

Life Gear 76140 E1 Sit-Up Bench Bedienungsanleitung

Life Gear

Life Gear Classic 93380 Bedienungsanleitung

Life Gear

Life Gear 93396 Bedienungsanleitung

Life Gear

Life Gear 94010 Bedienungsanleitung

Life Gear

Life Gear 93690 Bedienungsanleitung

Life Gear

Life Gear 93390 Bedienungsanleitung

Life Gear

Life Gear mercury 93575 Bedienungsanleitung

Life Gear

Life Gear 93580N Bedienungsanleitung

Life Gear

Life Gear Orbi trac 28320 Bedienungsanleitung

Life Gear

Life Gear Accord 93476 Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Weslo

Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

NordicTrack

NordicTrack E 9.2 Elliptical Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung