Life Gear 93580 Bedienungsanleitung

FORMULA ELLIPTICAL TRAINER

ITEM NO.: 93580

OWNER’S MANUAL

IMPORTANT: Read all instructions carefully before using this product. Retain this

owner’s manual for future reference.

The specifications of this product may vary from this photo, subject to change without notice.

2012, May

TABLE OF CONTENTS

WARRANTY ------------------------------------------------------------------------------- 1

SAFETY INSTRUCTIONS ------------------------------------------------------------- 2

PARTS LIST ------------------------------------------------------------------------------- 3

HARDWARE PACKING LIST --------------------------------------------------------- 5

TOOLS -------------------------------------------------------------------------------------- 6

OVERVIEW DRAWING -----------------------------------------------------------------7

ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8

OPERATING THE COMPUTER ------------------------------------------------------ 15

ADJUSTMENTS -------------------------------------------------------------------------- 18

MAINTENANCE -------------------------------------------------------------------------- 19

TROUBLESHOOTING ------------------------------------------------------------------ 19

WARM UPAND COOL DOWN ROUTINE ----------------------------------------- 20

ONE YEAR LIMITED WARRANTY

LifeGear Inc. warrants to the original purchaser that this product is free from defects in

material and workmanship when used for the purpose intended, under the conditions that it

has been installed and operated in accordance with LifeGear's Owner's Manual. LifeGear's

obligation under this warranty is limited to replacing or repairing, free of charge, any parts

which may prove to be defective under normal home use. This warranty does not include

any damage caused by improper operation, misuse or commercial application.

From the date of purchase, the frame is warranted to be free from defects for 1 (one) year.

This warranty is extended only to the original owner and is not transferable.

When ordering replacement parts please have the following information ready:

1. Owner's Manual

2. Model Number

3. Description of Parts

4. Part Number

5. Date of Purchase

SAFETY INSTRUCTIONS

Basic precautions should always be followed, including the following safety

instructions when using this equipment: Read all instructions before using this

equipment.

1. Read all the instructions in this manual and do warm up exercises before using this

equipment.

2. Before exercise, in order to avoid injuring the muscle, warm-up exercise of every

position of the body is necessary. Refer to Warm Up and Cool Down Routine pages.

After exercise, relaxation of the body is suggested for cool-down.

3. Please make sure all parts are not damaged and fixed well before use. This

equipment should be placed on a flat surface when using. Using a mat or other

covering material on the ground is recommended.

4. Please wear proper clothes and shoes when using this equipment; do not wear clothes

that might catch any part of the equipment.

5. Do not attempt any maintenance or adjustments other than those described in this

manual. Should any problems arise, discontinue use and consult an Authorized

Service Representative.

6. Be careful when step on or leave the pedal always hold the handlebars first. Make the

pedal at your side at the lowest position, step on the pedal, and stride over the main

frame then step on the other pedal. When using, please hold the handlebar by hands,

make the pedals running smoothly by push or pull handlebars, then run the equipment

regularly by cooperation of hands and feet. After exercise, please also make one

pedal at the lowest position and leave your foot on the higher pedal first and then

another.

7. Do not use the equipment outdoors.

8. This equipment is for household use only.

9. Only one person should be on the equipment while in use.

10. Keep children and pets away from the equipment while in use. This machine is

designed for adults only. The minimum free space required for safe operation is not

less than two meters.

11. If you feel any chest pains, nausea, dizziness, or short of breath, you should stop

exercising immediately and consult your physician before continuing.

12. The maximum weight capacity for this product is 110kgs.

WARNING:Before beginning any exercise program consult your physician.

This is especially important for the persons who are over 35 years old or who have

pre-existing health problems. Read all instructions before using any fitness

equipment.

CAUTION:Read all instructions carefully before operating this product.

Retain this Owner’s Manual for future reference.

PARTS LIST

No. Description Qty No. Description Qty

001 Main Frame 80x40x2 1 026 Bolt M6x40 6

002L Left Foot Bar 40x25x1.5 1 027 Tension Cable L=1800 1

002R Right Foot Bar 40x25x1.5 1 028 Bolt Cap S13 2

003L Left Handrail Arm Ø32x1.5 1 029 Screw ST4.2x25 15

003R Right Handrail Arm Ø32x1.5 1 030L Foot Bar Cover-A 2

004L Left Handrail Ø32x1.5 1 030R Foot Bar Cover-B 2

004R Right Handrail Ø32x1.5 1 031 Big Washer Ø6xØ16x1.2 3

005 Front Post Ø60x1.5 1 032 Bolt Ø10x46 2

006 Handlebar Ø25x1.5 1 033 Left Foot Pedal 395x150x65 1

007 Front Stabilizer Ø60x1.5x480 1 034 Right Foot Pedal 395x150x65 1

008 Rear Stabilizer Ø60x1.5x480 1 035 Front Left Stabilizer End Cap Ø60 1

009 Bolt M8x70 4 036 Front Right Stabilizer End Cap Ø60 1

010L Rear Left Stabilizer End Cap Ø60 1 037 Cover Cap Ø40xØ25x10 2

010R Rear Right Stabilizer End Cap

Ø60 1 038 Bolt M8x15 8

011 Big Curve Washer Ø20xØ8 10 039 Powder Metal Bushing

Ø14.2xØ10.2x10 4

012 Cap Nut M8 4 040 Bolt M8x20 2

013L Bolt for left U Shape Bracket 1/2” 1 041 Spring Washer Ø8 8

013R Bolt for right U Shape Bracket

1/2” 1 042 Washer Ø38x3 2

014L Left Nylon Nut 1/2” 1 043 Powder Metal Bushing

Ø38xØ32xØ19x14 4

014R Right Nylon Nut 1/2” 1 044 Bolt M6x35 4

015 Wave Washer Ø28xØ17x0.3 2 045 Curve Washer Ø6 4

016 Powder Metal Bushing

Ø28xØ24.5xØ16x14 4 046 Big Washer Ø8 2

017 Spring Washer Ø20 2 047 Bolt M6x10 1

018 Bearing 6000 2Z 2 048 Plastic Bushing Ø32xØ16x5xØ50 2

019 Washer 7/8" 1 049L Left Handrail Arm Cover-A 1

020 U Shape Bracket 2 049R Right Handrail Arm Cover-A 1

021 Nylon Nut M8 2 050L Left Handrail Arm Cover-B 1

022 Washer Ø16xØ8x1.5 2 050R Right Handrail Arm Cover-B 1

023 Bolt M8x50 2 051 Tension Control Knob 1

024 Nylon Nut M6 10 052 Screw ST4.2x20 2

025 Washer Ø6xØ12x1 6 053 Computer (RD-93225) 1

PARTS LIST

No. Description Qty No. Description Qty

054 Rear Decorative Cover for Front

Post 1 076 Bolt M8x25 1

055 Hand Pulse Sensor with Wire

L=750 2 077 M10x1 Nut for Flywheel 2

056 Handrail Foam Grip

Ø31xØ37x480 2 078 Flywheel Ø230x40x32 1

057 Handlebar Foam Grip

Ø27xØ33x360 2 079 Belt PJ380 J6 1

058 Handrail End Cap Ø32x1.5 2 080 Idle Wheel Bracket 1

059 Handlebar End Cap Ø28x1.5 2 081 Bolt M6x15 2

060 Phillips Self Tapping Screw

ST4.2x25 8 082 Eyebolt M6x36 2

061 Curve Washer for Tension

Control Knob Ø20xØ5.2 1 083 Tension Bracket 2

062 Bolt for Tension Control Knob

M5x55 1 084 Nut M6 2

063 Adjustable Leveler M10 2 085 Spring Washer Ø6 2

064 Sensor Wire I L=1100 1 086 Power Metal Bushing

Ø18xØ14xØ8x10 4

065 Sensor Wire II L=1600 1 087 Hexagon Nut M10 2

066 Screw ST2.9x12 2 088 Bolt M5x12 4

067 Left Cover 1 089 Bolt M8x10 1

068 Right Cover 1 090 Front Decorative Cover for Front

Post 1

069 Bearing Cup 2 091 Left Decorative Cover 1

070 Bearing 2 092 Right Decorative Cover 1

071 Bearing Nut I 15/16” 1 093 Curve Washer Ø16xØ8 2

072 Bearing Nut II 7/8” 1 094 Screw ST4.2x15 8

073 Washer Ø34.5xØ23x2.5 1 095 Washer Ø14xØ10x1 2

074 Hexagon Nut 7/8” 2 096 Screw ST4.8x20 2

075 Belt Pulley with Crank 6.5”/Ø260 1

HARDWARE PACKING LIST

(9) Bolt M8x70

4 PCS (12) Cap Nut M8

4 PCS

(13R) Bolt for right U Shape

Bracket 1/2” 1 PC

(14R) Right Nylon Nut 1/2” 1 PC

(15) Wave Washer

Ø28xØ17x0.3 1 PC

(17) Spring Washer Ø20 1 PC

(13L) Bolt for left U Shape

Bracket 1/2” 1 PC

(14L) Left Nylon Nut 1/2” 1 PC

(15) Wave Washer

Ø28xØ17x0.3 1 PC

(17) Spring Washer Ø20 1 PC

(24) Nylon Nut M6

10 PCS (25) Washer Ø6xØ12x1

6 PCS (26) Bolt M6x40

6 PCS

(28) Bolt Cap S13

2 PCS

(11) Big Curve Washer Ø20xØ8

4 PCS

(44) Bolt M6x35

4 PCS

(45) Curve Washer Ø6

4 PCS (94) Screw ST4.2x15

8 PCS

(29) Screw ST4.2x25

4 PCS

TOOLS

Multi Hex Tool

S10, S13, S17, S19

1 PC

Allen Wrench S6

1 PC Allen Wrench S8

1 PC

Multi Hex Tool with Phillips Screwdriver

S10, S13, S14, S15

1 PC

OVERVIEW DRAWING

49L

50L

40 41 42 43

50R

49R

42 41 40

26 60

10R

13L

16 20

14L

13R

16 15

14R

24 45

30R

78 77

24 45

10L

30R 60

30L

ASSEMBLY INSTRUCTIONS

1. Front and Rear Stabilizers Installation

Position the Front Stabilizer (7) in front of Main Frame (1) and align bolt holes.

Attach the Front Stabilizer (7) onto the front curve of the Main Frame (1) with two M8x70

Bolts (9), two Ø20xØ8 Big Curve Washers (11), and two M8 Cap Nuts (12). Tighten cap

nuts with the Multi Hex Tool with Phillips Screwdriver provided.

Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.

Attach the Rear Stabilizer (8) onto the rear curve of the Main Frame (1) with two M8x70

Bolts (9), two Ø20xØ8 Big Curve Washers (11), and two M8 Cap Nuts (12). Tighten cap

nuts with the Multi Hex Tool with Phillips Screwdriver provided.

Hardware:

Multi Hex Tool with Phillips Screwdriver

S10, S13, S14, S15

Tool:

(9) Bolt M8x70

4 PCS (12) Cap Nut M8

4 PCS

(11) Big Curve Washer Ø20xØ8

4 PCS

2. Front Post and Tension Control Knob Installation

Remove six M8x20 Bolts (38), six Ø8 Spring Washers (41), and six Ø20xØ8 Big Curve

Washers (11) from the Main Frame (1). Remove bolts and washers with the S6Allen

Wrench provided.

Insert the Tension Cable (27) through into the bottom hole of Front Post (5) and pull it out

from the square hole of Front Post (5).

Connect the Sensor Wire II (65) from the Main Frame (1) to the Sensor Wire I (64) from the

Front Post (5).

Insert the Front Post (5) onto the tube of the Main Frame (1) and secure with six M8x20

Bolts (38), six Ø8 Spring Washers (41), and six Ø20xØ8 Big Curve Washers (11) that were

removed. Tighten bolts and washers with the S6 Allen Wrench provided.

Remove the Ø20xØ5.2 Curve Washer for Tension Control Knob (61) and M5x55 Bolt for

Tension Control Knob (62) from the Tension Control Knob (51). Remove bolt and curve

washer with the Multi Hex Tool with Phillips Screwdriver provided.

Put the cable end of resistance cable of Tension Control Knob (51) into the spring hook of

Tension Cable (27) as shown in drawing A of figure 2. Pull the resistance cable of Tension

Control Knob (51) up and force it into the gap of metal bracket of Tension Cable (27) as

shown in drawing B of figure 2. Attach the Tension Control Knob (51) onto the Front Post

(5) with the Ø20xØ5.2 Curve Washer for Tension Control Knob (61) and M5x55 Bolt for

Tension Control Knob (62) that were removed. Tighten bolt curve washer with the Multi

Hex Tool with Phillips Screwdriver provided.

Allen Wrench S6

Multi Hex Tool with Phillips Screwdriver

S10, S13, S14, S15

Tool:

Andere Handbücher für 93580

Inhaltsverzeichnis

Andere Life Gear Ellipsentrainer Handbücher

Life Gear

Life Gear TRANSPORT ML 93680 Bedienungsanleitung

Life Gear

Life Gear 76140 E1 Sit-Up Bench Bedienungsanleitung

Life Gear

Life Gear mercury 93575 Bedienungsanleitung

Life Gear

Life Gear 93320 Bedienungsanleitung

Life Gear

Life Gear 93580 Bedienungsanleitung

Life Gear

Life Gear 93280 Bedienungsanleitung

Life Gear

Life Gear 93390 Bedienungsanleitung

Life Gear

Life Gear 93560 Bedienungsanleitung

Life Gear

Life Gear XINGGUI 93046 Bedienungsanleitung

Life Gear

Life Gear 93690 Bedienungsanleitung

Life Gear

Life Gear 94010 Bedienungsanleitung

Life Gear

Life Gear 93260 Bedienungsanleitung

Life Gear

Life Gear CLASSIC PRO 93790 Bedienungsanleitung

Life Gear

Life Gear 93385 Bedienungsanleitung

Life Gear

Life Gear 93266 Bedienungsanleitung

Life Gear

Life Gear 26355 Bedienungsanleitung

Life Gear

Life Gear Classic 93380 Bedienungsanleitung

Life Gear

Life Gear 93590 Bedienungsanleitung

Life Gear

Life Gear 93296 Bedienungsanleitung

Life Gear

Life Gear 93250 Bedienungsanleitung

Life Gear

Life Gear 93470 Bedienungsanleitung

Life Gear

Life Gear 26560 Bedienungsanleitung

Life Gear

Life Gear 93390 Bedienungsanleitung

Life Gear

Life Gear Accord 93476 Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Weslo

Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

NordicTrack

NordicTrack E 9.2 Elliptical Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung