MELICONI CONTROL 5-500 PLUS Bedienungsanleitung
6
USING THE KEYS AND FUNCTIONS
The functions described below are only available
if they are already foreseen by your appliance.
Keep this booklet in case you ever need to consult it in the future.
Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide,
it is even easier and faster to programme the remote control
and discover all its potential.
Thanks to its large database and numerous functions, the Meliconi 5 in 1 remote control is ideal for replacing
up to five remote controls of any brands for TV - VCR (
Video Recorder
) - DVD- SAT - TER (
Digital Terrestrial
).
Specific area for SET TOP BOX
FORWARD/REWIND functions for VCR and DVD
Thank you for choosing
a MELICONI remote control.
Teletext keys
(INDEX key not present in the SMART model)
Number keys
Keys for selecting which appliance you want to use.
TV ON/OFF key
Control the volume using +/–
To select the next (P+) or previous ( P-) channel or programme
MUTE key turns the volume on and off
Confirm key
VCR/DVD function keys: RECORD - PAUSE - STOP - PLAY
or fastext functions
To access the MENU
Key with additional TV functions
To select an external input terminal
To move around within the MENU or to control the BRIGHTNESS/COLOUR
Keys that the user can customize to memorize and access
additional commands (except the SMART model)
GB
PREPARE FOR USE
Read these instructions carefully
before programming your remote control!
1 - 2 - 3 - 4 - 5 - 6
7 - 8 - 9 - 0 - 1/--
7
HOW TO PROGRAMME THE REMOTE CONTROL
FITTING THE BATTERIES
Before programming and using the remote control,
fit the batteries.
The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:
• Change the batteries if the light indicator starts to flash during use. The batteries are low.
• Make a note of the codes for your appliances on the adhesive label inside the battery cover in case you
have to reprogramme your remote control.
• This remote control has a permanent memory and does not lose the programmed codes or functions
when the batteries are removed.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar remote
control but not the right one. In this case, repeat the search procedure starting from point 3, entering the
code previously used (e.g. 0025).
1. Turn on the appliance to be programmed:
- if a VCR, insert a cassette
- if a TV, SAT or TER select a programme
- if a DVD insert a DVD.
2.Look for the brand of the appliance you want to programme
in the code list and make a note of the corresponding
code alongside
(e.g. PHILIPS 0025)
.
3. Hold down the selection key for the appliance to be
programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the
brand code previously identified
(e.g. 0025).
The selection
key flashes more quickly to indicate that the remote
control is ready for the search.
5. Point the remote control towards the appliance. Press
and slowly release the ON/OFF key or PLAY for the VCR
and DVD several times, stopping when the appliance
responds correctly to the command.
6. When the appliance responds correctly, press the OK key
to confirm.Three flashes indicate that the search operation
has been completed correctly.
PHILIPS 0025
The TV -VCR -DVD - SAT - TER keys can be programmed according
to your requirements, following the procedure described below.
or
+++
5 SEC.
or or or or
The quickest and easiest way to programme the remote control is by consulting enclosed
CD or the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
or
+++
NB: THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if a key other than ON/OFF or PLAY is accidentally pressed
• if the end of the code search list has been reached. In this case, consult the website www.meliconi.com/guide
GLOBAL SEARCH REMOTE CONTROL PROGRAMMING
1. Turn on the appliance to be programmed:
- if a VCR, insert a cassette
- if a TV, SAT or TER select a programme
- if a DVD insert a DVD.
2. Hold down the selection key for the appliance to be
programmed for 5 seconds.
3. When the key is released, it will start to flash. Enter the
code 0000; the selection key flashes more quickly to
indicate that the remote control is ready for the search.
4. Point the remote control at the appliance. Press and slowly
release the ON/OFF key or PLAY for the VCR and DVD
several times, stopping when the appliance responds
correctly to the command.
5. When the appliance responds correctly, press OK to
confirm. Three flashes indicate that the search operation
has been completed correctly.
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar remote
control but not the right one. In this case, repeat the search procedure starting from point 2.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
NB: THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if a key other than ON/OFF or PLAY is accidentally pressed
• if the code search list is completed. In this case consult the enclosed CD or the site
www.meliconi.com/guide
This operation can take up to 20 minutes and should be carried out if you have not succeeded
in programming the remote control by means of the method described above.
8
The quickest and easiest way to programme the remote control is by consulting enclosed
CD or the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
5 SEC.
or or or or
CURRENT CODE DISPLAY
NB: this operation cannot be interrupted and the remote control
cannot therefore be used until the end of the four series of flashes.
1. Press the select key for which you want to know the code
and hold down for 5 seconds.
2.
When the key is released it will start to flash; press and
release the 1-/-- key within 8 seconds.
3. After a pause of several seconds, the indicator light produces
four series of flashes with a space between them, corres-
ponding to the code you are looking for. Count the number
of flashes; each series of flashes corresponds to one figure
in the code. 10 flashes correspond to 0.
4. Note the code on the adhesive label inside the battery cover
in case you have to reprogramme the remote control subse-
quently.
To find out the code of your remote control, follow this procedure:
Although not indicated on the keypad,
some keys can be used for additional commands.
Find them on your remote control by pressing the keys one by one and discovering the commands that
interest you.
In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and
BRIGHTNESS, can be found on the following keys:
TV FUNCTIONS ALWAYS ACTIVE (except the SMART model)
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
For the functions used less frequently, look for the additional commands on the site
www.meliconi.com/guide. As well as easily finding the code to programme your remote control, consulting
the on-line guide will help you to find which keys on the remote control correspond to the additional
commands. You can memorise the additional commands on the
F1 - F2 - F3 - F4
function keys (except
the SMART model) .
Normalization:
Brightness (+): or
Brightness (-): or
Colour (+): or
Colour (-): or
9
If you know the exact code with which to programme the remote control, enter it as follows:
ENTERING THE CODE
1. Hold down the selection key for the appliance to be
programmed for 5 seconds.
2. When the key is released it will start to flash; enter the
code (
e.g. TV 1100
). Three flashes indicate that the
operation has been completed correctly.
The functions
Mute
,
Vol -
,
Vol +
and
AV
are memorized on the keys
F1
,
F2
,
F3
,
F4
. These functions
can be used to control appliances other than the TV. For further information consult the enclosed CD or
the on-line guide on the site www.meliconi.com/guide
......................................................... = 1
.............................................. = 3
= 0
............................ = 6
Code obtained = 1306
+++
1
1 1
5 SEC.
or or or or
5 SEC.
or or or or
PROBLEM SOLVING
INFO-LINE
If you have any queries about your remote control:
• read this Instruction Booklet carefully - you will find an answer to most of your questions
• consult our website where you will find the answers you need easily and quickly.
SOLUTION
Try some of the other frequently-used keys. If the
problem persists, check that the batteries are fitted
correctly. If necessary, replace them with 2 new
1.5 V AAA/LR03 batteries.
Check that the batteries are new and that the remote
control is pointing at the TV without any obstacles
in the way. If required, reset the remote control
code, following the programming procedure.
The batteries are low. Change them.
You may have used the wrong code. Reset the
remote control code, following the programming
procedure.
To find the code with which to programme your
remote control consult the on-line guide at
www.meliconi.com/guide.
PROBLEM
The appliance does not respond and the TV -
CDR - DVD - SAT - TER selection keys do
not light up when a key is pressed.
The appliance does not respond but the
selection keys do light up.
The selection keys flash.
The remote control commands are not all
working correcting.
The code for your appliance make is not in
the Code Book.
10
WARRANTY: 2 years
The warranty ceases to be valid if the product
is tampered with or used incorrectly.
Purchase date / /
Dealer’s stamp
The symbol of the crossed trash can shown on the remote control indicates that once the product has reached the end of its working life it
should be disposed of separately from other waste. The user should, therefore, take the remote control to a specialised collection centre
for electronic and electrical waste, or hand it over to the dealer when purchasing a new similar remote control, on a one to one basis. Correct
separated collection for subsequent recycling, processing and environmentally compatible disposal contributes in preventing possible
negative effects on the environment and on health and favours the recycling of the materials used in producing the remote control. Improper
disposal of the product by the user leads to application of the penalties as per legislative decree no. 22/1997 (article 50 and following of
decree no. 22/1997).
Inhaltsverzeichnis
Andere MELICONI Fernbedienung Handbücher
MELICONI
MELICONI GUMBODY UNIVERSAL 5 SMART Bedienungsanleitung
MELICONI
MELICONI easy 2.1 Bedienungsanleitung
MELICONI
MELICONI TLC03+ Bedienungsanleitung
MELICONI
MELICONI personal 4 Bedienungsanleitung
MELICONI
MELICONI easytel TV+ Bedienungsanleitung
MELICONI
MELICONI Facile 5.1 LED Bedienungsanleitung
MELICONI
MELICONI Personal 2 plus Bedienungsanleitung
MELICONI
MELICONI Fully 8.1 Bedienungsanleitung
MELICONI
MELICONI pratico 6 Bedienungsanleitung
MELICONI
MELICONI CONTROL 2 Simple Bedienungsanleitung
MELICONI
MELICONI Control TV.1 Bedienungsanleitung
MELICONI
MELICONI TLC04 Bedienungsanleitung
MELICONI
MELICONI easytel 2+ Bedienungsanleitung
MELICONI
MELICONI MYCRO Bedienungsanleitung
MELICONI
MELICONI TLC04 Bedienungsanleitung
MELICONI
MELICONI PERSONAL 3 Bedienungsanleitung
MELICONI
MELICONI pratico 6 Installations- und Betriebshandbuch
MELICONI
MELICONI CONTROL TV 100 Bedienungsanleitung
MELICONI
MELICONI GumBody Universal 5 web Bedienungsanleitung
MELICONI
MELICONI Algo 2.1 Bedienungsanleitung
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
