MELICONI Pratico 6 Installations- und Betriebshandbuch

Thank you for choosing a Meliconi remote control.

Keep this booklet for future reference.

The Pratico 6 remote control is ideal for replacing up to 6 remote controls for TV - SAT (satellite decoder) - TER

(Digital Terrestrial decoder) - DVD (Dvd player and Blu Ray) – PVR (Personal Video Recorder, Media Center and

VCR) – AUX (other Audio Video devices). It can also be connected to a PC using the Meliconi audio cable (to be

purchased separately), thereby allowing the user to download the most up-to-date conﬁguration information.

The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.

IMPORTANT: The remote control must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they exist on your device.

ON / OFF switches the device OFF and

in some cases ON

Buttons for selecting the device to

be controlled

Numeric keypad

Selects digital TV and radio

Volume control +/–

For selecting an

external input source

Conﬁrm selection

For selecting the next programme P+

or the previous programme P–

Fastext functions or for selecting sub-menus

using colours

TELETEXT buttons

Speciﬁc buttons for decoder

For moving around within the MENU

MUTE turns sound OFF and ON

Selects

analogue/digital

Displays the list of programmes

DVD/PVR RECORD PAUSE STOP PLAY

buttons

DVD and PVR forward/back function

Before using the remote control, insert the batteries and programme it.

The Pratico 6 remote control is a universal remote with a memory containing data regarding numerous devices

produced by different brands on the market.

Each original device has a speciﬁc code which must be used to set up the remote control.

So to use the Pratico 6 you must enter the speciﬁc code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website

to identify the speciﬁc codes for the devices you wish to command. Then set the codes manually in your

MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their

remote control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 6A, Type, Brand, Model

-Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR

- TER (Digital Terrestrial decoder) - AUX (other audio video device).

-Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 6A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁrst code in the remote control as described in

the ENTERING THE CODE DIRECTLY section.

Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button on

the remote (or the PLAY button if the device is a VCR/DVD).

SETTING CODES USING A CELL PHONE

(the service s fee and the only cost is that of sending the SMS,

which naturally depends on the rates of the service operator in question)

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AA/LR06 batteries. Insert

them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button. If the light ﬂashes, the batteries

inserted are not charged and are about to go ﬂat, therefore you must

substitute them.

Do not leave ﬂat batteries inserted,

as liquid may leak and damage the remote control

CHECK

Check that the other buttons correspond to the functions of the original remote control; if not, it is likely

that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure

from point 2.

If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN

USE procedure and make a note of it inside the battery cover.

NOTE: During the search the indicator stops ﬂashing and the remote control exits the programming mode

in the following cases:

• if for 12 seconds the button indicated is not pressed or if another button is pressed

• if the list of codes to ﬁnd is terminated. If this happens, go to the www.meliconi.com/guide website

SETTING CODES USING A MANUAL SEARCH

(only to be performed if the speciﬁc code could not be found)

1. Switch on the device to be programmed:

- if it is a TV, SAT or TER select a programme

- if it is a DVD insert a DVD.

- if it is a VCR insert a cassette

2. Press and hold down for 6 seconds the device selection

button corresponding to the device you wish to enter

the code for. Note: Use the PVR button if the device is a

VCR.

3. Release the button. The indicator light will ﬂash. Point

the remote control at the device and press the ON/OFF

key (or PLAY if it is a VCR/DVD). If the device does NOT

switch off (or if the VCR/DVD does not start playing)

press the same button again slowly (it may be necessary

to press the button several times).

4. When the device responds correctly, press OK. Three

long ﬂashes indicate that the operation has been carried

out correctly.

6 SEC.

or or or or

NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it means

the system has not been able to process the data you have sent. Do not try sending another SMS use the

SETTING CODES USING A MANUAL SEARCH procedure instead.

If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code in

the SMS list on the remote control.

When the device reacts check whether the other buttons are operating correctly too.

If they do, the remote control is ready to use.

If they don’t, you are probably using an incorrect code destined for a very similar device; at this point

ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to ﬁnd a more suitable

code.

INTERNET UPDATE

Today you can download from the internet directly to your remote control the codes of the latest devices or those

which will be brought out in future, codes which would not otherwise be available using traditional programming

methods. To do this you need to purchase the special MELICONI Audiocable, which allows you to download

the information you need onto any PC using an internet connection. Then go to the www.meliconi.com/guide

website and follow the on-screen instructions.

MEMO FUNCTION

The MEMO function enables you to record a sequence of commands and to recall them by pressing a single

button. Example: switch on the TV, switch on the DVD, play a video, etc. To access this function, consult the

online guide at the www.meliconi.com/guide website

DISPLAY CODE IN USE

If you set up the remote control using the MANUAL SEARCH

procedure,obtainandmakeanoteofthecodeinuseasfollows:

1. Press and hold down for 6 seconds the device selection

button corresponding to the device you wish to enter

the code for. Note: Use the PVR button if the device is a

VCR.

2. Release the button. The indicator light will ﬂash. Press

the TV / RADIO button for an instant.

3. After a pause of several seconds, the indicator light

produces four sets of ﬂashes, spaced out, corresponding

to the code to be obtained. Count the number of ﬂashes.

Each set of ﬂashes corresponds to one ﬁgure in the code.

Ten ﬂashes correspond to the ﬁgure 0.

4. Make a note of the code obtained on the label on the

inside of the battery cover. You may need it in future.

Code obtained = 1306

6 SEC.

or or or or

ENTERING THE CODE DIRECTLY

(only to be performed if you know the speciﬁc code to be set)

1. Press and hold down for 6 seconds the device selection

button corresponding to the device you wish to enter

the code for. Note: Use the PVR button if the device is a

VCR.

2. Release the button. The indicator light will ﬂash.

Immediately enter the speciﬁc code previously found.

(e.g. 1306)

3. Three long ﬂashes indicate a correct setting.

If they do not appear, repeat the procedure. If the result is still negative, it means the code indicated

is not included in the remote control. So you need to load it via INTERNET.

(see following section)

6 SEC.

or or or or

TROUBLESHOOTING

PROBLEM

The device does not respond and the indicator light

does not come on when a button is pressed.

The device does not respond but the indicator light

comes on.

When you press a button the indicator light ﬂashes

and the device does not respond to commands.

The remote control does not execute all commands

correctly.

SOLUTION

Check that the batteries are charged and inserted

correctly and if necessary replace them with 2 new

1.5 V AA/LR06 alkaline batteries.

Make sure that the remote control is pointing at the

device and that there are no obstacles in the way.

If necessary, enter the remote control code again by

repeating the programming procedure.

Substitute the batteries, which are about to go ﬂat.

You may be using an incorrect code.

Enter the remote control settings again by repeating

the programming procedure.

INFO - LINE

•read this Instructions Booklet carefully as it should allow you to solve most normal problems.

•consult the www.meliconi.com website where you will ﬁnd all the answers you need quickly and easily.

2 year WARRANTY

The warranty is voided if the product is tampered

with or used improperly.

Remote control model: Pratico 6

Purchase date

Retailer stamp

The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the

product must be collected separately from other waste. Therefore, at the end of the device’s life, you must take it to appropriate centres

for the differentiated collection of electrical and electronic waste, or return it to the retailer when purchasing a new device of equivalent

type, on a one-for-one basis. Suitable differentiated collection to allow subsequent recycling of the decommissioned device, with

environmentally-compatible treatment and disposal, help to prevent any negative effects on the environment and health and to promote

the recycling of the materials of which the device is made. Improper disposal of the product by the user will be subject to the sanctions

in Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative Decree No. 22/1997).

If you have any questions about the new Pratico 6 remote control:

Andere Handbücher für pratico 6

Inhaltsverzeichnis

Andere MELICONI Fernbedienung Handbücher

MELICONI

MELICONI Universal 2 Bedienungsanleitung

MELICONI

MELICONI GUMBODY UNIVERSAL 3-300 Bedienungsanleitung

MELICONI

MELICONI personal 4 Bedienungsanleitung

MELICONI

MELICONI MYCRO Bedienungsanleitung

MELICONI

MELICONI GumBody Personal 1 Bedienungsanleitung

MELICONI

MELICONI Smart4 Bedienungsanleitung

MELICONI

MELICONI Speedy 210 combo Bedienungsanleitung

MELICONI

MELICONI SENIOR 2 RC Bedienungsanleitung

MELICONI

MELICONI TLC05 Bedienungsanleitung

MELICONI

MELICONI CONTROL 4 Plus Bedienungsanleitung

MELICONI

MELICONI TLC02 Bedienungsanleitung

MELICONI

MELICONI easy 2.1 Bedienungsanleitung

MELICONI

MELICONI TLC03+ Bedienungsanleitung

MELICONI

MELICONI TLC03 Bedienungsanleitung

MELICONI

MELICONI pratico 6 Bedienungsanleitung

MELICONI

MELICONI Control TV.1 Bedienungsanleitung

MELICONI

MELICONI FACILE LIGHT Bedienungsanleitung

MELICONI

MELICONI PRATICO 2 Light Bedienungsanleitung

MELICONI

MELICONI TLC04 Bedienungsanleitung

MELICONI

MELICONI Speedy Betriebsanleitung

MELICONI

MELICONI Personal 4+ Bedienungsanleitung

MELICONI

MELICONI EASY 300 Bedienungsanleitung

MELICONI

MELICONI GUMBODY FACILE SMART Bedienungsanleitung

MELICONI

MELICONI Algo 2.1 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung

MELICONI pratico 6 Installations- und Betriebshandbuch

Beliebte Fernbedienung Handbücher anderer Marken