Mercia Garden Products 01TDM0604SDFW-V1 Gebrauchsanweisung

P 1

01TDM0604SDFW-V1

6X4 APEX SHED

2mm Drill bit

x2 Winter = High Moisture = Expansion

Summer = Low Moisture = Contraction

All building’s should be

erected by two adults

For ease of assembly, you

MUST pilot drill all screw

holes and ensure all screw

heads are countersunk.

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

CAUTION

Every eort has been made during the

manufacturing process to eliminate the

prospect of splinters on rough surfaces of the

timber. You are strongly advised to wear gloves

when working with or handling rough sawn

timber.

**Protim Aquatan T5 (621)**

Your building has been treated with Aquatan.

Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct

application of Aquatan solution and then allowed to dry.

Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and

garden buildings.

Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl

sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.

Please retain product label and instructions for future reference

General Instructions

BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY

- Check the pack and make sure you have all the parts listed.

- When you are ready to start, make sure you have the right tools at hand (not supplied)

including a Phillips screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm

bit.

- Ensure there is plenty of space and a clean dry area for assembly.

TIMBER

As with all natural materials, timber can be aected during various weather conditions.

For the duration of heavy or extended periods of rain, swelling of the wood panels may

occur. Warping of the wood may also occur during excessive dry spells due to an interior

moisture loss. Unfortunately, these processes cannot be avoided but can be helped. It is

suggested that the outdoor building is sprayed with water during extended periods of

warm sunshine and sheltered as much as possible during rain or snow.

Our buildings are pre treated with a water based treatment**; this only helps to protect

the product during transit and for upto 3 months against mould. To validate your

guarantee and ensure longevity of the product, it is ESSENTIAL the building is treated

with a wood preserver within the rst three months of assembly and thereafter in

accordance with the manufactures recommendations. Care must be taken to ensure

the product is placed on a suitable base.

BUILDING A BASE

When thinking about where the building and base is going to be constructed:

Ensure that there will be access to all sides for maintenance work and annual

treatment.

Ensure the base is level and is built on rm ground, to prevent distortion. Refer to

diagrams for the base dimensions, The base should be slightly smaller than the external

measurement of the building, i.e. The cladding should overlap the base, creating a run

o for water. It is also recommended that the oor be at least 25mm above the

surrounding ground level to avoid ooding.

TYPES OF BASE

- Concrete 75mm laid on top of 75mm hard-core.

- Slabs laid on 50mm of sharp sand.

Whilst all products manufactured are made to the highest standards of Safety and in

the case of childrens products independently tested to EN71 level, we cannot accept

responsibility for your safety whilst erecting or using this product.

Refer to the instructions pages for you specic product code

P 7

01TDM0604SDFW-V1

Please retain product label and instructions for future reference

Before assembly

please make sure you have a

suitable base ready to erect your

building

MADE IN GREAT BRITAIN

Overall Dimensions:

Length = 1794mm

Width = 1199mm

Height = 1863mm

Base Dimensions:

Length = 1753mm

Width = 1175mm

Building content

Fascia 694mm x4

Fixed Window Strip 546mm x5 FW-V1 ONLY

Cover Trims 1575mm x4

Ridge Bar 1708mm

Finial x2

Door Gable Back Gable Plain Side

Qty 2 -NW only

Window Panel

FW-V1 ONLY

Floor Roof

1 2 34567

Door Beading Strip 1530mm x1

T Hinge

Qty 3

Plastic Window Cill

FW-V1 ONLY

Felt

Styrene Qty 2

18 20

L-Bracket

Qty 2

Turn Button

Qty 2

Eaves Frame 897mm x4

Rim Lock

Master

Door

Nail Bag Felt Tacks x 72

20mm Screw x 8

30mm Screw x 69

50mm Screw x 30

40mm Screw x 46

30mm Screw x 2

Remove transportation

blocks from the bottom

of each panel before

beginning assembly. Each

Panel should have two

Pre Assembly

Fix the T Hinges onto the

doors and door frame as

shown. Ensure that the

screws go through the

cladding and into the

framing behind.

21x30mm screws

30mm

screw

Pre drill

hole

P 8

Place the oor on a rm and level base,

ensure the base has suitable drainage free

from areas where standing water can collect.

See the front page for base requirments.

Step 1

Do not secure the building to the

oor until the roof is tted. Fix the

panels onto the oor using 50mm

screws in alignment with the oor

joists

Fix the corners with 50mm screws

as shown in diagram.

Position the panels so there is equal spacing

between the oor and cladding on all 4 sides

Step 2

3x50mm Screws

Pre drill

hole

50mm

screw

Step 3

9x50mm Screws

Fix the corners with 50mm

screws as shown in diagram.

Pre drill

hole

50mm

screw

Use part 3 for a no window

building and part 4 for a

windowed building

4 or 3

Step 4

8x20mm Screws

Place the ridge bar in between the front

and back gables. Ensure the top corners

of the ridge bar sit ush with the top

points of the door gable. Fix the ridge bar

to the gable using one L bracket for each

end.

Fix with 4x20mm screws each

20mm

screw Pre drill

hole

P 9

Step 5

Fix two eaves frames to each roof sheet

using 3x30mm screws per eave.

Fix the roof sheets to the roof ensuring

they come together at the top using

40mm screws directly through the roof

sheet at the top. Make sure to attach the

roofs to the ridge bar.

30mm

screw

12x 30mm Screws

28x 40mm Screws

40mm

screw

Pre drill

hole

Pre drill

hole

Step 6

bOnce the roof is xed

attach the building to

the oor with 50 mm

screws.

16x 50mm Screws

50mm

screw Pre drill

hole

72x Tacks

Felt

tacks

Step 7

Cut the felt into 2 sheets at

1994mm and x onto the roof

using felt tacks as shown in

diagram ensuring there is

50mm overhang around the

sides.

HANDLE

WITH CARE

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

P 10

Fit the Cover Trims to the front

and back of the building as

shown in the illustration using

30mm screws. Trim the length

of the cover trims to the

required size before tting if

necessary.

Pre drill to avoid splitting.

12x30mm Screws

Step 8

30mm

screw

Pre drill

hole

Step 9

16x40mm Screws

Attach the faiscas to the roof

leaving a slight overhang at the

top.

Fit the fascias to the roof over

the felt and secure in place with

40mm screws as shown.

Pre drill to avoid splitting.

40mm

screw

Pre drill

hole

Fit the styrene sheets on top of

the window cill.

When positioning the styrene

sheets ensure there is an equal

distance between them and at

either side of the windows.

Fix the window strips to the two

pieces of framing that sit

alongside the outside edges of

the window with 3x30mm

screws for each strip.

Attach the three window strips

at either side of the windows

using 3x30mm screws each.

Make sure the screws enter the

framing in the window panel

and not the styrene.

9x30mm Screws

Step 10

For the no window version go to step 11

30mm

screw Pre drill

hole

6x30mm Screws

30mm

screw Pre drill

hole

Place the

plastic window

cill onto the

Window Panel

and silicone in

place as shown

on both

diagrams to the

left.

Side View

Styrene

Window Cill

SILICONE

SEALANT

P 11

Step 11 Rim lock

Flat head

Grub Screw

2x30mm screw

2x30mm screws

Screws provided with lock

Do not over tighten the screws

Rim lock xing

Fig 1. (internal view)

Place the lock onto internal

horizontal framing ensure

alignment with the pre

drilled holes before xing.

Align Lock keep with lock

and x with screws provided.

Do not over tighten the

screws, otherwise the

locking mechanism will not

work.

Fig 2.

Place door handle bar

through the lock as in

diagram, x door handle

onto bar with the at headed

grub screw.

g 3. (External view)

Fir the door handle cover

over the bar and x with

2x30mm screws provided.

Fix the door handle onto bar

with the at headed grub

screw as in diagram.

Fix the Turn Button onto the

door gable using 1x30mm

black screw for each one.

2x 30mm Black Screw

Step 12

30mm

screw

30mm

screw

Pre drill

hole

Attach the door beading strip to the

inside of the door gap (opposite side

to the lock) securing into place using

4x30m screws.

Step 13

2x 30mm Screw

It is ESSENTIAL that you apply wood

treatment immediately after the building

has been assembled.

AFTER TREATMENT:

score around protective

cover on glazing and

carefuly peel

covering back

Inhaltsverzeichnis

Andere Mercia Garden Products Gartenhaus Handbücher

Mercia Garden Products

Mercia Garden Products 0644AXNE0656LBDDHGSD1SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA0806DDFW-V2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 04GREENLEAN0804-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHPN1208FGC32TWSA-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01PTSHPWOR1010DDOW-V4 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01GRODB1008-V4 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01RAW1210DDOW-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03OVLPBRN0705-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products SI-002-001-0022 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTSHAX0806SDSEC-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 0619LOG015-V4 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01SHPSTR0402-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHPN0806FGD1TW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03HEL1010DDFW-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03TGCOR0707-V5 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA0808DDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DTPRMSHPN1008DDOP-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA0806SDFW-V2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01OVLPA0808DDFW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01GRO1008DD-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHAX0705HGD2MW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products ESDXL21PT001 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 02HIDE0705-V1-PEFC Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 04DTSTRDAX0406HGS-V1 Bedienungsanleitung

Beliebte Gartenhaus Handbücher anderer Marken

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Rion

Rion Hobby Gardener Bedienungsanleitung

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Shire

Shire Salcey Bedienungsanleitung

Rutland County

Rutland County Burley 6ft Bedienungsanleitung

Palmako

Palmako Roger 27,7 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-9 Installationshandbuch

Lemeks

Lemeks Palmako PM70-6436 Installationshandbuch

Lemeks

Lemeks Palmako PM56-4435 Installationshandbuch

Lemeks

Lemeks 106214 Installationshandbuch

POD

POD Camping 480 Bedienungsanleitung