Mercia Garden Products Groundsman Gebrauchsanweisung

P 1

01GRO1008DD-V3

10x8 Groundsman

2mm Drill bit

x2 Winter = High Moisture = Expansion

Summer = Low Moisture = Contraction

All building’s should be

erected by two adults

For ease of assembly, you

MUST pilot drill all screw

holes and ensure all screw

heads are countersunk.

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

CAUTION

Every eﬀort has been made during the

manufacturing process to eliminate the

prospect of splinters on rough surfaces of the

timber. You are strongly advised to wear gloves

when working with or handling rough sawn

timber.

Please retain product label and instructions for future reference

General Instructions

BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY

- Check the pack and make sure you have all the parts listed.

- When you are ready to start, make sure you have the right tools at hand (not supplied)

including a Phillips screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm

bit.

- Ensure there is plenty of space and a clean dry area for assembly.

TIMBER

As with all natural materials, timber can be aﬀected during various weather conditions.

For the duration of heavy or extended periods of rain, swelling of the wood panels may

occur. Warping of the wood may also occur during excessive dry spells due to an interior

moisture loss. Unfortunately, these processes cannot be avoided but can be helped. It is

suggested that the outdoor building is sprayed with water during extended periods of

warm sunshine and sheltered as much as possible during rain or snow.

Our buildings are pre treated with a water based treatment**; this only helps to protect

the product during transit and for upto 3 months against mould. To validate your

guarantee and ensure longevity of the product, it is ESSENTIAL the building is treated

with a wood preserver within the ﬁrst three months of assembly and thereafter in

accordance with the manufactures recommendations. Care must be taken to ensure

the product is placed on a suitable base.

BUILDING A BASE

When thinking about where the building and base is going to be constructed:

Ensure that there will be access to all sides for maintenance work and annual

treatment.

Ensure the base is level and is built on ﬁrm ground, to prevent distortion. Refer to

diagrams for the base dimensions, The base should be slightly smaller than the external

measurement of the building, i.e. The cladding should overlap the base, creating a run

oﬀ for water. It is also recommended that the ﬂoor be at least 25mm above the

surrounding ground level to avoid ﬂooding.

TYPES OF BASE

- Concrete 75mm laid on top of 75mm hard-core.

- Slabs laid on 50mm of sharp sand.

Whilst all products manufactured are made to the highest standards of Safety and in

the case of childrens products independently tested to EN71 level, we cannot accept

responsibility for your safety whilst erecting or using this product.

Refer to the instruction pages for your speciﬁc product code

**Protim Aquatan T5 (621)**

Your building has been treated with Aquatan.

Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct

application of Aquatan solution and then allowed to dry.

Aquatan is a decorative ﬁnish to colour the wood, which is applied industrially to timber fence panels and

garden buildings.

Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl

sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.

12 3 4

Door Gable

AI-GRO1008DD-V2DG

Window Gable

AI-01GRO1008DD-V2WG

Window Side QTY 2

AI-01GRO1008DD-V2WS

Plain Side QTY 2

AI-01GRO1008DD-V2PS

Floor QTY 2

AI-01GRO1008DD-V2F

Door

AI-01-21ZB675X1720-V1

Roof Panel QTY 2

AI-01GRO1008DD-V2RP

Opening Window QTY 2

AI-01OW-V1

Bunk Support - 2920mm

F4458-2920mm

Roof Block - 793mm QTY 2

F4458-793mm

Fascia - 1480mm QTY 4

S1295-1480mm

Window Trim - 1000mm QTY 2

S1240-1000mm

Cover Trim - 1640mm QTY 6

S1256-1640mm

Door Trim - 1443mm

S1245-1443mm

Door Trim - 1722mm QTY 2

S1245-1722mm

Fascia Block - 120mm QTY 4

S1244-120mm

Finial QTY 2

Butt Hinge

PI-07-0066

QTY 4

T-Hinge

PI-07-0021

QTY 6

Tower Bolt

PI-07-0030

Casement Stay

PI-07-0005

QTY 2

“L” Bracket

PI-07-0012

QTY 2

Bolt Block

120mm

50mm Screw x88

40mm Screw x32

Felt Tacks x180

20mm Screw x14

30mm Screw x100

16mm Screw x14

Nail Bag

Cloaking strip - 1670mm

F2744-1670mm

P 2

01GRO1008DD-V3

Overall Dimensions:

Length = 3147mm

Width = 1969mm

Height = 2094mm

Base Dimensions:

Length = 3044mm

Width = 1851mm

Please retain product label and instructions for future reference

Before assembly

please make sure you have a

suitable base ready to erect your

building

MADE IN GREAT BRITAIN

19 20 21 22 23 24 25

Hasp & Staple

PI-07-0191

Pre drill

hole

30mm

screw

40mm

screw

Step 1

Remove transportation blocks

from the bottom of each panel

before assembling the building.

Pre-Assembly

Fix the door strips ontop the

front of the door gable using

4x40mm screws per strip.

The frames should sit 13mm

from the door aperture.

Attach the doors to the

building using the

T-hinges and 7x30mm

screws per hinge.

42x30mm Screws

12x40mm Screws

13mm

*Tip: build the roof support

“Step 5” by lining the

components against the

back of the door gable.

Step 2

Place the ﬂoor panels

onto a ﬁrm & level base,

ensure the base has

suitable drainage free

from areas where

standing water can

collect.

Secure the ﬂoors

together using 10x50mm

screws ﬁxing in an

alternating pattern.

10x50mm Screws

Pre drill

hole

50mm

screw

Step 3

Place the plain

gable and the

window panels

onto the ﬂoor

and secure using

6x50mm screws.

bDO NOT secure

the building to

the ﬂoor until the

roof is ﬁxed in

place.

6x50mm Screws

Pre drill

hole

50mm

screw

* Window panels can

be placed on either

side of the building.

Using the same method outlined

in Step 3, ﬁx the plain sides & the

door gable using 12x50mm

screws.

DO NOT secure the building to

the ﬂoor until the roof is

ﬁxed in place.

Step 4

12x50mm Screws

Pre drill

hole

50mm

screw

Step 5

Fix the roof panels to the

building. Ensure the framing

ﬁts into the slot at the top

of the gables.

Secure in place using 12x30mm

screws per roof panel.

24x30mm Screws

Pre drill

hole

30mm

screw

bbbbb

P 3

Please retain product label and instructions for future reference

Step 6

Now That the roof is ﬁxed

secure the building to the

ﬂoor with 24x50mm screws.

* Ensure to screw in alignment

with the ﬂoor bearers.

24x50mm Screws

Pre drill

hole

50mm

screw

Felt

tacks

Pre drill

hole

40mm

screw

Pre drill

hole

30mm

screw

P 4

Please retain product label and instructions for future reference

Step 7

Cut the felt into 3 sheets and

lay onto the roof as shown in

the diagram ensuring there is

50mm overhang around the

sides.

Fix using 180x felt tacks at

100mm intervals.

180x Felt Tacks

Step 8

Attach the cover trims to the

building using 3x40mm

screws per strip.

18x40mm Screws

* Felt measurement: 3250mm

HANDLE

WITH CARE

Step 9

Fix the fascia blocks to roof using

2x30mm screws per block.

Ensure the blocks are ﬂush to the

edge of the roof.

Attach the fascia’s and ﬁnial’s to

the front and back of the building

with 12x30mm screws.

20x30mm Screws

Step 11

Attach the bolt block to the

top of the slave door with

2x30mm screws.

Align the tower bolts onto

the block and ﬁx using

6x30mm screws.

8x30mm Screws

Pre drill

hole

30mm

screw

Opening Window

Fixed Window

Pre drill

hole

16mm

screw

30mm

screw

P 5

Please retain product label and instructions for future reference

Step 10

To ﬁx the lock in place. Screw the Staple

to the Door Gable or Slave door.

Making sure the Hasp is in line with

the staple and screw into the Door or

Master door.

To lock the Door, place the Hasp over the

Staple and twist into the lock position as

shown.

8x30mm screws.

Pre drill

hole

30mm

screw

Step 12

Opening Window

Place the window strip 11mm

over the window opening and

ﬁx in place with 3x30mm

screws per strip.

Ste

6x30mm Screws

If you would like the windows

to be opening use the butt

hinges to attach the window to

the strip. Fix the hinges to the

strip using 30mm screws and

16mm to ﬁt the hinges to the

window frame.

12x16mm Screws

12x30mm Screws

Fixed Window

If you would like the windows

to be ﬁxed instead of

opening, secure the window

to panel using 4x30mm screws

per window.

8x30mm Screws

30mm

Screws

16mm

screws

Pre drill

hole

20mm

screw

Pre drill

hole

30mm

screw 50mm

screw

It is ESSENTIAL that you apply wood

treatment immediately after the building

has been assembled.

AFTER TREATMENT:

score around protective

cover on glazing and

carefuly peel

covering back

P 6

Please retain product label and instructions for future reference

Step 14

Line the ridge bar centrally

between the roofs, support

with the roof block at each

gable end, ﬁxing in place

using 5x50mm screws per

block.

secure the bunk support

with the “L”brackets at

each end, ﬁtting them

into place using 4x30mm

screws per “L” bracket.

8x30mm Screws

10x50mm Screws

Step 13

Fix the casement stay to the

window and then align the

ﬁxings to the window panel

framing. Ensure the casement

stay ﬁts onto the ﬁxings when

closed before securing in

place.

12x20mm Screws

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mercia Garden Products Gartenhaus Handbücher

Mercia Garden Products

Mercia Garden Products 01DTGRODB1008-V4 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0628CSNE0303HGDD2SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0634CSNE0303HGDD2SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products SI-002-001-0022 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03HEL1008DDFW-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DTSHAX0806SDSEC-V2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01RAW1210DDOW-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DTPRMSHAX1010DDOP-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01RAW2010DDOW-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHCR0707FGD2TW-V2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 06LOG004-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03LBRO1208-V7 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 04DTSTRDAX0406HGS-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTPRMSHPN1208DDOP-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 02DTTWRS0605-V1-PEFC Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01RAW1010DDOW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01OVLPA0806SDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03TGCORSE0409-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01DTOVRA0806SDFW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products BOURNEMOUTH 03BRN0807-V4 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03BRN0705-V5 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 02DTSHAX0505HGD1W-V1-PEFC Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 0634RASH0302FBSDNW-V1 Gebrauchsanweisung

Beliebte Gartenhaus Handbücher anderer Marken

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Rion

Rion Hobby Gardener Bedienungsanleitung

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Shire

Shire Salcey Bedienungsanleitung

Rutland County

Rutland County Burley 6ft Bedienungsanleitung

Palmako

Palmako Roger 27,7 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-9 Installationshandbuch

Lemeks

Lemeks Palmako PM70-6436 Installationshandbuch

Lemeks

Lemeks Palmako PM56-4435 Installationshandbuch

Lemeks

Lemeks 106214 Installationshandbuch

POD

POD Camping 480 Bedienungsanleitung