Miele SEB 215 Bedienungsanleitung

DGebrauchsanweisung für Elektrobürste

GElectrobrush Operating Instructions

MGebruiksaanwijzing voor elektroborstel

FMode d’emploi pour lectrobrosse

IIstruzione d’uso per spazzola elettrica

EInstrucciones de manejo cepillo el ctrico

PInstruções de utilização para Escova el ctrica

gΟδηγίες χρήσης για ηλεκτρικές βούρτσες

TElektrikli Fırça Kullanma Kılavuzu

jBrugsanvisning for elektrobørste

NBruksanvisning for elektrobørste

SBruksanvisning för elektroborste

fMoottorikäyttöisen mattosuuttimen käyttöohje

RИнcтpyкция пo пpимeнeнию элeктpoщeтки

SEB 215 - SEB 217

M.-Nr. 06 586 190

This Electrobrush conforms to

current safety requirements.

Incorrect use can, however, present

a risk of both personal injury and

material damage.

To avoid the risk of accidents and

damage to the vacuum cleaner and

to the brush please read these

operating instructions, as well as the

instructions supplied with the

vacuum cleaner, before using this

appliance for the first time.

Keep these instructions in a safe

place, and make them available to

future users.

Correct use

The Miele Electrobrush is a motor

driven accessory appliance for use

only with Miele vacuum cleaners. It

must not be used with vacuum cleaners

produced by other manufacturers.

The Electrobrush must only be

used for household purposes to

vacuum and brush dry floor surfaces.

Do not use on people or animals.

Any other use, modification or alteration

to the brush is at the owner’s risk and

could be dangerous.

The manufacturer cannot be held liable

for damage resulting from improper or

incorrect use of the appliance.

Technical safety

Before using the Electrobrush

for the first time, ensure that the

connection data on the data plate

(voltage and frequency) match the

mains electricity supply. It is essential

that they match to avoid damage to the

appliance.

Do not use the Electrobrush if it

shows any sign of damage.

A damaged appliance could be

dangerous.

Always disconnect the vacuum

cleaner from the mains supply

when you have finished using it as well

as for maintenance work and cleaning.

Switch off at the wall socket and

remove the plug.

Do not let the appliance get wet.

Clean with a dry or slightly damp

cloth when disconnected from the

mains supply. If moisture gets into the

appliance there is the risk of an electric

shock.

Safety with children

Do not let children play with the

appliance or its controls. Supervise

its use by older children and the elderly

or infirm.

GWarning and Safety instructions

Use

Never touch the roller brush while

it is rotating. Danger of injury.

Do not use the Turbobrush at head

level. Long hair, ties, scarves etc.

could be vacuumed in and become

entangled in the roller brush.

Keep the Electrobrush away from

curtains, clothing etc, as these

could be vacuumed in and become

entangled in the roller and possibly get

damaged.

Do not vacuum up items which are

heavy, hard or have sharp edges.

They could block the Electrobrush and

the vacuum cleaner and cause

damage.

Do not vacuum up ashes or coal,

whether glowing or apparently

extinguished. The Electrobrush and

the vacuum cleaner might catch fire.

Do not vacuum up any inflammable

or combustible liquids or gases

and do not vacuum in areas where

such substances are stored. Danger of

explosion.

Do not vacuum up any water, liquid

or damp dirt. This will cause major

faults and could seriously impair the

functioning and electrical safety of the

vacuum cleaner and the Electrobrush.

Danger of electric shock! Wait until any

freshly cleaned or shampooed carpets

or floor coverings are completely dry

before attempting to vacuum.

Blocked roller warning light

The indicator light on the Electrobrush

has two functions.

The light is

–green when the Electrobrush is

switched on.

–red, if the roller brush is blocked

(blocked roller warning light), for

example, when a large object has

been vacuumed up.

^Disconnect the vacuum cleaner from

the electricity supply immediately the

red light comes on. Switch off at the

wall socket and remove the plug.

^Remove the cause of the obstruction,

see "Cleaning and care".

Then wait for about two minutes, before

switching the cleaner back on again.

This allows the blocked roller warning

indicator to re-set itself.

Disposing of an old appliance

When disposing of an old

Electrobrush first make it unusable.

Make appropriate arrangements

for its safe disposal.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.

GWarning and Safety instructions

Operating instructions

These operating instructions are for

Electrobrush models:

1. SEB 217 for hand-held vacuum

cleaners and

2. SEB 215 / SEB 216 for cylinder

vacuum cleaners.

The illustrations referred to in the text

are shown at the end of the operating

instructions.

Using the Electrobrush

The Electrobrush is particularly suitable

for intensive vacuuming of carpets

which are subject to hard wear. It is

very effective at removing deep seated

dirt and preventing areas of frequent

use being trodden into a path.

A separate motor drives the

Electrobrush roller brush and four

rollers maintain the brush 1.5 mm away

from the floor. The normal floorhead or

one of the Miele floorbrushes should be

used for cleaning hard floors, such as

tiled or parquet floors.

It is also important to observe the

flooring manufacturer’s cleaning and

care instructions.

The following should not be

vacuumed using the Electrobrush:

–Floor surfaces with a variable or

uneven profile. The brush might

come into contact with the floor

and cause damage.

–Carpets such as saxony with very

long-pile, berber and sheepskin

rugs, and valuable hand-knotted

carpets, e.g. Persian and similar.

There is a danger of the threads

being pulled out. If in doubt, contact

the carpet manufacturer/retailer.

Using the Electrobrush

^To achieve the best effect, pass the

Electrobrush slowly backwards and

forwards over the carpet or floor

covering. For carpets with fringes,

always draw the Electrobrush from

the carpet across the fringe towards

the rest of the floor.

Connecting the Electrobrush

to the vacuum cleaner

Connect the Electrobrush to the

vacuum cleaner as shown in the

illustrations at the end of the operating

instructions.

Hand-held vacuum cleaner - see

illustration a

Cylinder vacuum cleaner - see

illustration b

This illustration shows connection to an

S 300 / S 400 series vacuum cleaner as

an example.

The position of the socket for connec-

ting the Electrobrush will depend on the

vacuum cleaner model.

For S 500 / S 600 / S 700 / S 800 and

S 5000 vacuum cleaners the

protective cap must be removed from

the socket: see illustration cand d.

For SEB 216-3 (see illustration d)

This Electrobrush is easily removed

enabling one of the other accessories

to be used.

^Press the release button and pull the

suction tube with plug connector out

of the Electrobrush.

The cable will remain on the suction

tube.

Cable

When the Electrobrush is connected to

a cylinder vacuum cleaner, the cable

must be secured to the telescopic tube

and to the suction hose. Nine clips are

supplied for this:

–two for securing the cable to the

telescopic tube (already in position)

–seven for running the cable along the

suction hose (these can be adjusted)

^Fit the clips to the suction hose

leaving approximately the same

distance between each clip.

Switching on and off

The Electrobrush is operated in

conjunction with the vacuum cleaner.

Some models, however, are fitted with a

switch which allows the Electrobrush to

be switched on and off separately.

Warning light

The warning light on the Electrobrush is

green when the Electrobrush is

switched on.

If the warning light on the

Electrobrush is red, there is a

blockage in the roller, see "Warning

and Safety instructions, Blocked

roller warning light".

Always disconnect the vacuum

cleaner from the electrical supply

for maintenance work and cleaning.

Switch off at the wall socket and

remove the plug.

Removing threads and hairs

(illustrations e,fand g)

^Cut any threads or hairs that have

become entangled on the roller brush

with a pair of scissors. Then run the

vacuum cleaner to vacuum up the

bits.

For more obstinate tangles or

blockages inside the Electrobrush, the

cover can be opened.

^Loosen the two locking screws on the

underside of the brush with a small

coin, and take off the roller cover.

The roller brush can now be taken out

of its supports and cleaned. The

compartment interior can also be

cleaned.

When re-fitting the roller brush

please note the following

(see illustration h)

There are notches on the supports.

With a new roller brush:

Fit the supports so that the single notch

points towards the roller cover, (see left

hand illustration). The bristles protrude

approx. 2 mm. This is important for the

brushing effect. When the bristles are

slightly worn out:

^Fit the supports so that two notches

point towards the roller cover, (see

right hand illustration).

^Put the roller cover back on and

close it, (see illustration i).

^Tighten the locking screws. If the

bristles are totally worn out, a

replacement roller brush can be

purchased through your Miele Dealer

or the Spare Parts Dept.

Replacing the drive belt

(illustrations jand k)

The housing must be opened to fit a

new drive belt.

^Remove roller cover a(as already

described) and lift roller brush boff

its supports.

^Unscrew fixing screws cfrom the

brush base section d, and separate

the base section from top section e.

^Fit a new drive belt.

^Reassemble the Electrobrush by

reversing the procedure.

Replacing the connection

cable

If the connection cable for this

appliance is damaged it must be

replaced by a connection cable

specifically designed for this

appliance. Please contact your

Miele dealer, or the Miele Spare

Parts Dept.

GCleaning and care

Dieses Handbuch passt für folgende Modelle

Andere Miele Staubsauger Handbücher

Miele

Miele SD Series Bedienungsanleitung

Miele

Miele HS19 Bedienungsanleitung

Miele

Miele S5 S5980 Bedienungsanleitung

Miele

Miele SGSH2 Bedienungsanleitung

Miele

Miele Olympus HS12 Bedienungsanleitung

Miele

Miele S 5981 PowerPlus Bedienungsanleitung

Miele

Miele S 7000 Bedienungsanleitung

Miele

Miele HS20 Bedienungsanleitung

Miele

Miele SGJA0 Bedienungsanleitung

Miele

Miele S 5001 Bedienungsanleitung

Miele

Miele HS15 Bedienungsanleitung

Miele

Miele S 248 i Bedienungsanleitung

Miele

Miele HS19 Bedienungsanleitung

Miele

Miele S 4000 Series Bedienungsanleitung

Miele

Miele S 4000 Series Bedienungsanleitung

Miele

Miele VACUUM CLEANER S278I SILVER STAR Bedienungsanleitung

Miele

Miele SEB 217 Bedienungsanleitung

Miele

Miele HS15 Bedienungsanleitung

Miele

Miele HS18 Bedienungsanleitung

Miele

Miele SGDE0 Bedienungsanleitung

Miele

Miele TRIFLEX HX1 Bedienungsanleitung

Miele

Miele S 280i Bedienungsanleitung

Miele

Miele Boost CX1 Active Bedienungsanleitung

Miele

Miele HS10 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch