Morphy Richards VC73410 MUK Bedienungsanleitung

VC73410 MUK Rev 4

* Register online for your 5 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)

Bagless Upright Vacuum Cleaner

www.morphyrichards.co.uk/blog

For competitions, product hints and tips

and more join us at www.facebook.com/morphyrichardsuk

@loveyourmorphy

Please read and keep these instructions for future use

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 1

Health and Safety

•WARNING: Whenever the cleaner is in use, due to

the risk of entrapment in rotating parts, keep loose

clothing, hair, fingers etc. away from the brush bar,

nozzle and any handheld accessories.

•WARNING: Disconnect from the mains supply

before carrying out any routine maintenance, such

as cleaning any blockages, changing any filters or

accessing the floor nozzle.

•This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, if they have been given supervision

or instruction concerning the use of the appliance in

a safe way and understand the hazards involved.

•Children shall not play with the appliance.

•Cleaning and user maintenance shall not be

undertaken by children without supervision.

Personal safety

• WARNING: Only lift the product by the carry handles (1

or 10) and never pick the cleaner up by the floor nozzle.

•Always disconnect the appliance from the mains supply

after use, and prior to cleaning or carrying out routine

maintenance.

•Never use in the presence of explosive liquid or vapours.

•Never pick up inflammable or poisonous liquids such as

petrol, copier toner or other volatile substances. Never

pick up acids, asbestos or asbestos dust.

•Never touch the plug or cable with wet hands.

•Do not immerse cord, plug or cleaner in water or other

liquid.

•The appliance must never be left running unsupervised.

Location

•Do not use or keep this product outside.

•Do not store the appliance near hot surfaces eg. ovens or

heating appliances.

Mains cable

•If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent, or similarly qualified

person to avoid a hazard.

•Do not allow the mains lead to become strained or run

this appliance over it.

Product safety

•Never use the appliance without the filters being installed.

•Never use the appliance to vacuum hot ashes, broken

glass, sharp objects or liquids.

•Use only Morphy Richards spare parts and accessories.

•Never modify the cleaner in any way.

•Repairs to electrical appliances are only to be undertaken

by trained professionals. Unprofessional repairs can be

dangerous for users.

Electrical requirements

•Check that the voltage on the rating plate of your

appliance corresponds with your house electricity supply

which must be A.C. (Alternating Current).

•Should the fuse in the mains plug require changing, a 13

amp BS1362 fuse must be fitted.

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 2

Health and safety .......................................................................

Electrical requirements ..............................................................

Product overview / Features .....................................................

Dual functionality .......................................................................

Upright vacuuming: assembly ..................................................

Using in upright mode ...............................................................

Using in Lift Away canister mode .............................................

Using the attachments in Lift Away canister mode .................

Fitting the Dust Away cleaning cloth (certain models only) ...

Cleaning under furniture in Lift Away canister mode ...............

Adjusting suction power ...........................................................

Safety cut-outs ..........................................................................

Maintenance ..............................................................................

Emptying the dust canister .......................................................

Maintenance - filters ..................................................................

Hose blockages ........................................................................

Cleaning the motorised floor brush ..........................................

Cleaning the turbo nozzle (certain models only) ......................

Storage .......................................................................................

Guarantee ...................................................................................

Contents

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 3

Features

(1) Handle

(2) Stretch hose

(3) Suction adjustment collar

(4) Handle release button

(5) Accessory holder

(6) Upper cord wrap (quick

release)

(7) Cord hook

(8) Extension tube

(9) Extension tube release

button

(10) Carry handle

(11) On/Off 3-position switch

(12) Upper bin emptying release

button

(13) Dust canister

(14) Screen filter

(15) Lower bin emptying release

button

(16) Dust canister release

latches

(17) Lower cord wrap

(18) Motor base

(19) Lift Away canister release

button

(20) Exhaust filter cover

(21) Floor brush nozzle tube

(22) Floor brush nozzle hose

(23) Motorised floor brush

nozzle

(24) Motorised floor brush

indicator light

(25) Rotating brush bar

(26) Extra long crevice tool

(certain models only)

(27) Crevice tool

(certain models only)

(28) Dusting brush

(29) Turbo nozzle

(certain models only)

(30) Dust Away floor attachment

(certain models only)

(31) Dust Away cleaning cloth

(certain models only)

(32) Lift Away canister

Product overview

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 4

Dual functionality

Upright vacuuming Lift Away canister

Your vacuum cleaner can easily be configured

into two different cleaning modes:

•Upright vacuum for hard floors and carpets.

•Lift Away canister (32) which can be carried with

you whilst cleaning hard to reach places.

You can carry your vacuum cleaner in both

modes by the carry handle (10)‚ located on top of

the dust canister (13).

Upright vacuuming: assembly

1Place the motorised floor brush nozzle (23) on

a level surface and align the floor brush nozzle

tube (21) with the tube on the Lift Away

canister (32) and lower until you hear the two

pieces click into place.

NOTE: The motorised floor brush nozzle must

be fully locked in place to ensure the electrical

connection is made.

2Attach the end of the extension tube (8) to the

tube on the back of the Lift Away canister (32)

until it clicks in to place.

3Slide the accessory holder (5) in to position

opposite the upper cord wrap (6), over the

extension tube (8). Align the tab and groove

and push down.

4Store the dusting brush (28) and the crevice

tool (26/27 depending on model) on the

mounts of the accessory holder.

5Push the handle (1) onto the top of the

extension tube (8) until you hear it click into

place.

6Insert the end of the stretch hose (2) into the

connector on the back of the Lift Away

canister.

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 5

Using in upright mode

Cord

Hook

Rotate the upper cord wrap (6) to quickly release

the power cord.

Secure the power cord in the cord hook (7).

Press the On/Off 3-position switch (11) to the “I”

position to vacuum hard floors (suction only) or

to the “II” position to engage the motorised

floor brush nozzle (23) (for vacuuming carpets

and rugs).

NOTE: The rotating brush bar (25) on the

motorised floor brush nozzle (23) will not spin

unless the nozzle is flat against the floor and the

handle (1) is tilted back. Gently press the

motorised floor brush nozzle (23) down with your

foot while you grasp the handle (1) and tilt it

back towards you.

Indicator

Light

IMPORTANT: The motorised floor brush indicator

light (24) will illuminate green when the

motorised floor brush is on, or red if there is a

blockage or a jam (see ‘Safety Cut-Outs’ section

on page 8).

Using in Lift Away canister mode

This function is ideal for cleaning stairs,

curtains, upholstery and hard to reach places.

1Separate the Lift Away canister (32) from the

motorised floor brush nozzle (23) by pressing

the Lift Away canister release button (19) on

the side of the Lift Away canister.

2Pull the Lift Away canister up.

•Press the On/Off 3-position switch (11) to the

“I” position to turn the vacuum on for

above-floor cleaning and hold the handle (1) in

one hand while you carry the Lift Away

canister (32) around the home with the other

hand (see ‘Using the attachments in Lift Away

canister mode’).

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 6

Using the attachments in Lift Away canister mode

1Press the handle release button (4) and pull the

handle (1) up so the desired attachment can be

attached onto the end of the handle, or

2Press the extension tube release button (9) and

pull the extension tube (8) up so the desired

attachment can be attached onto the end of

the extension tube.

•NOTE: Attachments should only be used in

Lift Away canister mode, not in upright mode.

List of attachments

Dusting brush (28) for delicate surfaces.

Crevice tool (26/27 depending on model) for

awkward places, corners and behind radiators etc.

This tool is also useful on stairs.

Turbo nozzle (29) (certain models only) is ideal for

human and pet hair removal from stairs and

upholstery.

Dust Away floor attachment (certain models only)

(30 and 31) for use on hard floors (see below). The

Dust Away floor attachment attaches to the

extension tube (8) only.

Fitting the Dust Away cleaning cloth (certain models only)

Use the Dust Away cleaning cloth to clean dry bare floor surfaces. Do not use to clean damp floors or

wet/sticky messes.

1 32

The Dust Away cleaning cloth

(31) attaches to the Dust Away

floor attachment (30) with four

velcro pads.

Slip two of the tabs between

the suction nozzle and the

duster base and attach them to

the front fasteners on the base.

Pull the other two tabs tightly

around to the back fasteners on

the base. For best results,

ensure that the pad is flat

against the bottom surface and

secured tightly.

Wash the cleaning cloths seperately from other items with warm water either in the washing machine or

by hand using liquid detergent. Do not use bleach or fabric softeners as they damage or leave a coating

that will reduce the cleaning performance of the cleaning cloths. Tumble dry at low temperatures or line

dry to extend the life of the micro-fibre fabric.

The cleaning cloth should be washed after every use, and replaced every six months. Contact Morphy

Richards to purchase a replacement. Only use cleaning cloths provided by Morphy Richards, which are

designed to work with the Dust Away floor attachment.

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 7

This function is ideal for cleaning underneath low

furniture.

1. Separate the Lift Away canister (32) from the

motorised floor brush nozzle (23) by pressing the

Lift Away canister release button (19) on the side

of the Lift Away canister.

2. Press the extension tube release button (9) and

pull the extension tube (8) up.

3. Attach the end of the extension tube (8) to the

motorised floor brush nozzle (23) or Dust Away

Floor attachment (30).

4. Press the On/Off 3-position switch (11) to the “I”

position to turn the suction motor on.

NOTE: The rotating brush bar (25) will not rotate

in Lift Away canister mode.

5. Gently press the motorised floor brush nozzle (23)

down with your foot while you grasp the handle

(1) and tilt it back towards you. Tip the unit

backwards to access under low furniture.

When using the attachments, the suction may be

too powerful. Adjust the suction power by rotating

the suction adjustment collar (3) 90°

anti-clockwise to open the valve to reduce

suction. Less suction may be required for

cleaning delicate areas and upholstery.

Rotate the collar clockwise to close the valve

when you need high suction and for vacuuming

floors.

If the cleaner overheats, a motor protection

thermostat will automatically switch the motor off.

If this happens, switch the cleaner off, unplug

from the power supply and leave the cleaner to

cool for at least 90 minutes. Check the airways

for blockages, empty the dust canister and clean

the filters before restarting.

If the rotating brush bar (25) becomes jammed, a

safety cut-out will stop the brush and the

motorised floor brush indicator light (24) will

change from green to red. If this happens, switch

off and unplug the product. Disconnect the

motorised floor brush nozzle and carefully remove

the blockage.

WARNING: Always unplug the vacuum cleaner

from the mains supply before undertaking any

of the following maintenance procedures.

Empty the dust canister (13) regularly even if it

does not look full, this will maintain the

performance.

1. Unplug the cleaner from the mains switch.

2. Undo the dust canister release latches (16) on

each side of the Lift Away canister (32) by lifting

them up and outwards.

3. Remove the dust canister from the motor base

(18).

Maintenance

Safety cut-outs

Emptying the dust canister

Cleaning under furniture in

Lift Away canister mode

Adjusting suction power

Certain

models

only

Suction

Release Collar

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 8

4. Hold the dust canister (13) over a bin and press

the lower bin emptying release button (15). Tap

gently to empty contents. Press the door shut

again until it clicks into place.

5. If required, turn the dust canister (13) upside

down over the bin and press the upper bin

emptying release button (12).

Tap gently to remove contents.

Use a dry cloth or paper towel to remove debris

stuck to the screen filter (14) inside the dust

canister. Press the door shut again until it clicks

into place.

Remember to periodically (at least once a month)

clean the pre-motor filters (see ‘Cleaning the

pre-motor flters’ on this page) before refitting the

dust canister.

6.Replace the dust canister on top of the motor

base (18).

7.Hook the two dust canister release latches (16)

onto the tabs on the sides of the dust canister

(13) and push down to lock.

The guarantee may be invalidated if the motor is

damaged due to: using the appliance without

the filters installed; not cleaning the filters; or

not replacing damaged filters.

Cleaning the pre-motor filters

To maintain suction, the pre-motor filters must

be cleaned each time the dust canister (13) is

emptied.

1. Remove the dust canister.

2. Pull the 2 filters out from the top of the motor

base (18).

3. Wash the filters in cold water and thoroughly air

dry before re-fitting.

IMPORTANT: Do not wash filters with hot water

or detergents.

IMPORTANT: Do not use heated appliances to

dry filters.

4. Replace the felt filter in first, then the foam filter.

5. Replace the dust canister.

Cleaning the exhaust filter (20)

The exhaust filter (20) must be cleaned at least

every three months.

The exhaust filter is located on the front of the

motor base (18).

1. Remove the filter cover.

Maintenance - filters

Screen

Filter

Pre-Motor

Foam Filter

Felt Filter

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 9

2. Take out the HEPA filter by pulling it straight out.

3. Turn the filter over so that the dirty side is on the

bottom and vigorously tap it clean over a dustbin

to remove any dust.

4. Wash in cold water and thoroughly air dry before

re-fitting.

IMPORTANT: Do not wash filters with hot water

or detergents.

IMPORTANT: Do not use heated appliances to

dry filters.

5. Replace the HEPA filter back into the vacuum

cleaner.

6. Replace the cover by inserting the two tabs into

the holes at the top and then swinging the cover

down until it clicks into place.

The hoses (2) (22) may be detached and

inspected by pulling out connections or squeezing

the tabs together and pulling up where applicable.

Straighten out the hoses and look inside for

blockages. Also inspect inside the suction ducts

on the vacuum cleaner.

1. Press the On/Off 3-position switch (11) to the “O”

position to turn the vacuum off and unplug the

power cord from the mains outlet.

2. Separate the Lift Away canister (32) from the

motorised floor brush nozzle (23) by pressing the

Lift Away canister release button (19) on the side

of the Lift Away canister, then gently hold the

motorised floor brush nozzle to the floor with your

foot and pull the Lift Away canister up.

3. Turn the motorised floor brush over to inspect the

rotating brush bar (25) and pull away any hairs or

fibres. If they are tightly wound around the brush,

carefully snip the fibres with scissors, being

careful not to damage the rotating brush bar, pull

away from the rotating brush bar and dispose of

in a bin.

Hose blockages

Cleaning the motorised floor

brush

Rotating

Brush

VC73410MUK Rev4_Instruction Book 31/10/2012 11:18 Page 10

Inhaltsverzeichnis

Andere Morphy Richards Staubsauger Handbücher

Morphy Richards

Morphy Richards VC73111 MUK Bedienungsanleitung

Morphy Richards

Morphy Richards CYCLONIC BAGLESS UPRIGHT VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards GOBLIN 1400W WET AND DRY CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards Supervac Sleek Pro Bedienungsanleitung

Morphy Richards

Morphy Richards VORTICITY Bedienungsanleitung

Morphy Richards

Morphy Richards GrimeBuster steam cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards Storm Bedienungsanleitung

Morphy Richards

Morphy Richards 71077 VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards 700006 Bedienungsanleitung

Morphy Richards

Morphy Richards VC73184 Bedienungsanleitung

Morphy Richards

Morphy Richards Ecolectric 73383 Bedienungsanleitung

Morphy Richards

Morphy Richards VC70069 MUK Bedienungsanleitung

Morphy Richards

Morphy Richards ECO PRIUS Bedienungsanleitung

Morphy Richards

Morphy Richards Vacuum Cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials Bag Vacuum Cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards 73380 Bedienungsanleitung

Morphy Richards

Morphy Richards POD VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards IB73301 Bedienungsanleitung

Morphy Richards

Morphy Richards Essentials Family and Pets+ Bedienungsanleitung

Morphy Richards

Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1 Bedienungsanleitung

Morphy Richards

Morphy Richards IB71061 Bedienungsanleitung

Morphy Richards

Morphy Richards Goblin 73276 Bedienungsanleitung

Morphy Richards

Morphy Richards Ecovac vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards Upright Bagless Vacuum Cleaner Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch