Morphy Richards GrimeBuster steam cleaner Bedienungsanleitung

GrimeBuster steam cleaner

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your

new cleaner...

No steam

•Check the power supply.

•Check the steam switch is set to the on position.

WARNING: If the cleaner has been boiled dry it must be

switched off for a few minutes to allow the safety cut-out

to reset.

•Check water is in the tank.

•The cleaner may need descaling. We recommend the use of

filtered water to reduce the scale.

(In hard water areas the cleaner will require regular descaling.

Follow the instructions on page 8.)

Please study all instructions carefully before use.

This product is also supplied with a user guide CD ROM.

70515+70516 Rev 1 19/5/04 3:59 PM Page 1

Important safety

instructions

The use of any electrical appliance

requires the following common sense safety

rules.

Primarily there is danger of injury or

death and secondly the danger of damage

to the appliance. These are indicated in the

text by the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance!

In addition we offer the following safety

advice.

Location

•Do not use or keep this product outside

when it is raining.

•Do not store the appliance near hot

ovens or heating appliances.

Children

•Never allow children to use this

appliance.

Personal safety

•WARNING: The filling cap must not

be opened during use.

•Let the cleaner cool for a few minutes

before re-filling.

•To protect against fire, electric shock

and personal injury do not immerse cord,

plug or cleaner in water or other liquid.

•The plug should be removed from the

wall socket after use, before cleaning,

filling or changing the accessories.

•The accessories get very hot. Allow to

cool before changing.

•Make certain the steam has stopped

before changing the accessories or

putting the hose aside.

•WARNING: Do not discharge the

steam towards people. Danger of

scalding.

•WARNING: Never touch the plug or

cable with wet hands.

•Steam must not be directed towards

equipment containing electrical

components, such as the interior of

ovens.

Other safety considerations

•Do not use any chemical detergents,

perfumes, alcohol etc in water.

•Repairs to electrical appliances are only

to be undertaken by trained personnel.

Unprofessional repairs can be dangerous

for users.

•Use only genuine Morphy Richards spare

parts and accessories.

•If the electrical cable becomes damaged

the complete cable assembly must be

replaced. Do not attempt this task

yourself, contact Morphy Richards using

the replacement parts number on the

front of this leaflet.

•The appliance must never be left running

when unsupervised.

•This steam cleaner is intended for

domestic use only. Misuse or use for

commercial or any other purpose will

render the guarantee invalid.

Product safety

•Never modify the cleaner in any way.

•When using the cleaner always keep it

horizontal.

Electrical requirements

Check that the voltage on the rating

plate of your appliance corresponds with

your house electricity which must be A.C.

(alternating current).

If the socket outlets in your home are

not suitable for the plug supplied with this

appliance the plug should be removed and

the appropriate one fitted.

WARNING: The plug removed from

the mains lead, if severed, must be

destroyed as a plug with a bared

flexible cord is hazardous if engaged

into a live socket outlet.

WARNING: This appliance must be

earthed.

Should the fuse in the 13 amp plug

require changing a 13 amp BS1362 fuse

must be fitted.

70515+70516 Rev 1 19/5/04 3:59 PM Page 2

Features

⁄ Filler cap

¤ Heater on/off button

‹ Steam on/off button

› Machine socket

ﬁ ‘Heater on’ indicator light

ﬂ ‘Steam ready’ indicator light

‡ ‘Refill’ indicator light

· ‘Steam indicator’ light

‚ Carrying handle

„ Flexible hose

‰ Hose plug

Â Handle with remote steam control

Ê Handle control steam switch

Á Locking mechanism (safety lock)

Ë Extension tubes x 2

È Release button

Í Variable steam knob (optional)

Standard accessories

Î Cotton towel

Ï Funnel

Ì Large floor brush

Ó Brush connector

Ô Jet nozzle

 Round bristle brush (metallic)

Ò Round bristle brush (nylon)

Ú Integrated window squeegee

Û Triangular nozzle

Ù Sock for triangular nozzle

ı Accessory bag (not shown)

Optional accessories

ˆ Wall paper stripper

˜ Professional iron

¯ Iron pad

›

ﬂ

„

‰

ﬁ

‚

⁄

‹

‡·

ÁÊ



Optional accessories

70515+70516 Rev 1 19/5/04 3:59 PM Page 3

Setting up your steam

cleaner

Filling the boiler

1Unscrew the filler cap ⁄anti-clockwise.

2Fill the boiler with a maximum of 1.8

litres of water by using the funnel Ï

provided. A

3Do not use any detergents.

4Screw the filler cap ⁄clockwise until

finger tight. Do not overtighten.

Attaching hose and

accessories

1Pull down the flap on the front of

machine socket. B

2Insert the plug on the end of the hose ‰

into the machine socket ›with the

button side facing up, and push firmly

until it clicks into place. B

3Attach the desired accessory, ie. large

floor brush Ì, triangular nozzle Û,

these need to be attached to the brush

connector Óbefore attaching it to the

extension tube or handle. Jet nozzle Ô,

window squeegee Úto the extension

tube Ëor directly to the handle Â,

depending on the application. The

accessories vary per machine.

4The round brush(es) and Òcan be

attached to the jet nozzle.

5Join the extension tubes together, slide

one tube into the other until it locks into

place C.

6Attach the tubes to the handle of the

hose. Slide the handle into the extension

tube until it locks into place D.

•Some tasks may be easier with only one

tube fitted or none at all.

7To connect the desired accessory

directly to the steam handle, slide the

handle into the accessory head until it

locks into place.

8When using the large floor brush or the

triangular brush, the brush connector

needs to be fitted to the brush first, in

order to attach the same to the

extension tube.

70515+70516 Rev 1 19/5/04 3:59 PM Page 4

To fit the connector

1Push the connector end, holding it

upside down, fully into the brush inlet E.

2Twist the connector 1/2a turn, until it is in

place. F

•The fit between the connector and the

tubes and/or handle is tight to ensure no

steam leaks. It is recommended to keep

both parts lubricated to facilitate

connecting and disconnecting.

3To detach the accessories, press the

release button Èand pull the items

apart.

WARNING: Accessory heads may be

hot. Please be careful not to trap your

fingers.

•The triangular nozzle also has a cotton

sock which fits over the bristles. Ideal for

use on upholstery and bedding.

Operating your steam

cleaner

1Connect the unit to the mains and switch

on the boiler heater by pressing the

heater on/off button ¤. The ‘heater on

light’ is illuminated.

•Steam will be available in approx 10

mins. When the steam is ready for use

the ‘steam ready’ light ﬂwill turn green.

2Make sure that the locking mechanism

Áon the handle has been released. If

you push the lock Átowards the rear,

the steam switch cannot be operated.

Push the lock forward so that the steam

switch is released. G

3To make steam ready, press the ‘steam

on/off’ button ‹and the orange light ·

will come on. Steam is now ready to be

released.

4To release steam, press the handle

control switch Ê. At the start, always

point the steam handle at a cloth until a

steady flow of steam comes out.

•During steam release the green heater

light will turn off.

5To stop releasing steam, simply release

the handle control switch Ê.

Certain models only

•If your cleaner features a vari-steam

knob Íthe steam flow can be adjusted

to specific requirements.

6Turn the vari-steam knob fully anti-

clockwise for maximum steam and

clockwise for minimum steam flow H.

•If the ‘refill’ indicator light ‡turns red,

the boiler must be refilled.

70515+70516 Rev 1 19/5/04 3:59 PM Page 5

Re-filling

When the ‘refill’ light ‡turns red, there

should be no steam available for release.

The boiler needs to be refilled.

1Switch off the boiler heater by pressing

the heater on/off button ¤.

2If there is pressure in the boiler, the filler

cap ⁄will revolve, a safety feature

prevents it from being unscrewed.

3Release any steam pressure in the

system using the steam on/off switch ‹

on the machine and handle Ê. Switch

off the steam release button ‹. The cap

can then be unscrewed.

4Unplug the mains cable. Leave the

product with the filler cap off for 10

minutes before refilling.

5Refill the boiler using the funnel A.

6Use warm water to reduce heat-up time.

WARNING: Do not pour cold water

into a very hot boiler as steam and hot

water may be blown out of the filling

hole and can scald.

7Screw the cap back on. Start operation

again. (See operation section).

Switching the unit off

1Switch the unit off by means of switches

¤and ‹.

2Remove the hose plug ‰from the unit

by pressing the release button, holding

down the socket flap simultaneously.

3Remove the plug from the mains socket.

4Any remaining water can be left inside

the unit.

•To avoid deforming the brushes and

Òensure that the brushes are allowed

to cool down before storing.

Use of accessories

Steam handle Â

To avoid spurting of heavy and moist

steam it is recommended always to attach

an accessory to the steam handle.

Large floor brush Ì

Recommended applications include:

-carpets and rugs

-sealed timber and parquetry

-ceramic tiles

-vinyl

1The large floor brush can be attached to

the extension tubes or directly to the

steam handle, provided that the brush

connector Óis fitted.

2Stretch the cotton cloth lightly over the

bristles using the clips provided on the

brush head I.

3Switch on the steam and move the cloth

covered brush gently over the surfaces

to be cleaned.

•Replace the cloth regularly so that more

dirt can be collected and to avoid too

much moisture being applied to the floor

and leaving it very wet.

•Heavily soiled areas will require more

attention to allow steam more time to act

on dirt while lightly soiled and smooth

surfaces will only require a quick wipe.

Jet nozzle Ôand round

brush and Ò

Recommended applications include

-Hard to reach surfaces such as corners

and joints.

-Toilets and sanitary installations

- Venetian blinds

Without round brush

-Defrosting freezers

-Eliminating odours and creases in

clothing. Firstly place the garment on to

a clothes hanger and spray steam at a

distance of around 10-15cm.

-Removing dust from plants. Maintain a

distance of around 30-40cm to avoid

burning leaves by direct contact with

steam.

70515+70516 Rev 1 19/5/04 3:59 PM Page 6

1The jet nozzle can be attached either

directly to the handle or via the

extension tubes.

•The closer you hold the jet nozzle to the

object to be cleaned, the better the

cleaning results will be.

•The round bristle brushes can be

snapped onto the end of the jet nozzle.

•The nylon brush is suitable for most

cleaning applications such as, grout,

tapware, toilets, bathrooms, fridge seals

and sliding door runners.

•The metallic brush is suitable for more

stubborn dirt where a more abrasive

action will not affect the surface, such as

BBQ plates and lime scale in toilets.

Sanitising and removing dust mites,

allergies from bedding and upholstery

Fit the triangular nozzle with cotton cloth

fitted and pass the steam slowly and evenly

over the surface ensuring all areas are

treated. Repeat the process. Leave the

mattresses to dry thoroughly before

covering.

Triangular brush Û

Recommended applications include:

-bedding for removal of dustmites and

their allegens. Allow mattresses to dry

naturally.

-smaller washable areas, such as:

kitchen and bathroom surfaces

-car interiors

- upholstery

Integrated window cleaner Ú

1Fit the window cleaner to the handle

(attach extension tubes if required).

2To ‘steam clean’ the surface, place the

thick rubber of the accessory head

against the glass, whilst releasing the

steam. Keep the steam control switch Ê

pressed until the entire surface is

covered with steam.

3To remove excess water turn the

accessory head around with the

squeegee against the surface. Move the

squeegee in straight passes from top to

bottom. Wipe the rubber blade and the

bottom edge of the window dry after

each pass.

Professional iron ˜(certain models only)*

The high steam professional iron

produces up to 6 times more steam than a

normal domestic iron and is up to 4 times

faster.

Note: Do not stand the iron on its end,

always place it with the soleplate down on

the iron pad ¯supplied.

1Firmly insert the plug of the iron into the

machine socket of the cleaner until it

locks in place.

2The temperature setting on the iron

needs to be set to the correct setting for

the fabric concerned.

3Press the steam on/off button ‹on the

machine. Both orange lights will come

on. The light on the iron will turn off

when it has reached the desired

temperature.

4When the steam is ready for use and the

iron is hot, place your thumb on the large

switch located at the top of the iron, to

release steam.

5Release some steam away from the

fabric before commencing ironing until a

steady flow of steam comes out.

6The iron can be used vertically to

‘steam-iron’ curtains, dresses etc.

70515+70516 Rev 1 19/5/04 3:59 PM Page 7

Wall paper stripper ˆ *

(certain models only) J

1Fit wallpaper stripper directly to the hose

handle, locking into place. J

2Press the steam on/off button ‹. The

orange light will come on.

3Place the wallpaper stripper with its

entire surface on the edge of a sheet of

wallpaper. Press the handle control

steam switch and allow the steam to

penetrate until the wallpaper is soaked

through (approx. 10 sec.).

4Without switching it off, move the

wallpaper stripper to a new location.

5Use a putty knife to lift the loosened

wallpaper, and pull it off completely.

*These accessories are available as

optional extras, if not supplied with your

machine, please contact our helpline for

more information.

Maintenance

Cleaning the boiler

1Disconnect from the mains and make

sure it is cold.

2To clean the boiler, fill boiler with water

and shake it vigorously to loosen any

scale that has settled at the bottom of

the boiler.

3Pour the water out of the boiler and the

scale will be flushed out.

Descaling the boiler

In order to keep the heat-up time

constant it is recommended to de-scale

your cleaner at regular intervals.

1Mix one litre of water with 0.25 litres of

vinegar and pour into a boiler with the

funnel provided.

2Shake the cleaner and then allow the

mixture to work for at least one hour.

3Empty and rinse the boiler until water is

clear.

Consumables

If you experience any difficulty in

obtaining service or spare parts, please

telephone our customer helpline (during

office hours)

Helpline

If you have any difficulty with your

appliance do not hesitate to call us. We are

likely to be more help than the store from

where it was bought.

Please have the following information

ready to enable our staff to help you.

•Name of product

•Model number as shown on the

underside of the appliance.

70515+70516 Rev 1 19/5/04 3:59 PM Page 8

Troubleshooting

Fault

No steam

Very little steam

Very long heat up time.

Loud whistling noise

accompanied by steam

from the rear of the

machine.

Possible cause

No electrical supply.

Switches off.

Safety lock on hose handle

engaged.

Variable steam controller

not open. (Some models

only)

Limescale build-up inside

boiler.

Solution

Check the fuse, plug and

socket.

Disengage the safety lock.

Adjust steam controller

knob.

Descale.

If you encounter any other problems with the product, contact our Morphy Richards

helpline.

70515+70516 Rev 1 19/5/04 3:59 PM Page 9

Two year guarantee

It is important to retain the retailers

receipt as proof of purchase. Staple your

receipt to this back cover for future

reference.

Please quote the following information if

the product develops a fault. These numbers

can be found on the base of the product.

Model no. Serial no.

All Morphy Richards products are

individually tested before leaving the factory.

In the unlikely event of any appliance proving

to be faulty within 28 days of purchase it

should be returned to the place of purchase

for it to be replaced.

If the fault develops after 28 days and

within 24 months of original purchase, you

should contact the Helpline number quoting

Model number and Serial number on the

product, or write to Morphy Richards at the

address shown. You will be asked to return

the product (in secure, adequate packaging)

to the address below along with a copy of

proof of purchase. Subject to the exclusions

set out below (1-5) the faulty appliance will

then be repaired or replaced and dispatched

usually within 7 working days of receipt.

If for any reason this item is replaced

during the 2 year guarantee period, the

guarantee on the new item will be calculated

from original purchase date. Therefore it is

vital to retain your original till receipt or

invoice to indicate the date of initial

purchase.

To qualify for the 2 year guarantee the

appliance must have been used according to

the manufacturers instructions. For example,

the product must have been regularly

descaled, as instructed.

EXCLUSIONS

Morphy Richards shall not be liable to

replace or repair the goods under the terms

of the guarantee where:

1The fault has been caused or is

attributable to accidental use, misuse,

negligent use or used contrary to the

manufacturers recommendations or where

the fault has been caused by power

surges or damage caused in transit.

2The appliance has been used on a voltage

supply other than that stamped on the

products.

3Repairs have been attempted by persons

other than our service staff (or authorised

dealer).

4Where the appliance has been used for

hire purposes or non domestic use.

5The guarantee excludes consumables

such as the cotton cloths.

This guarantee does not confer any rights

other than those expressly set out above and

does not cover any claims for consequential

loss or damage. This guarantee is offered as

an additional benefit and does not affect your

statutory rights as a consumer.

•This guarantee is valid in the UK and

Ireland only.

Morphy Richards products are intended for

household use only.

Morphy Richards has a policy of continuous

improvement in product quality and design.

The company, therefore reserves the right

to change the specification of its models at

any time.

The After Sales Division

Registered address

Morphy Richards Ltd, Mexborough

South Yorkshire, England, S64 8AJ

Helpline (office hours)

UK 0870 060 2604

Republic of Ireland 1800 409119

VC70516M UK Rev 1 0504

70515+70516 Rev 1 19/5/04 3:59 PM Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Morphy Richards Staubsauger Handbücher

Morphy Richards

Morphy Richards Storm Bedienungsanleitung

Morphy Richards

Morphy Richards Supervac Sleek Pro Bedienungsanleitung

Morphy Richards

Morphy Richards VC7341DMUK Bedienungsanleitung

Morphy Richards

Morphy Richards 71077 VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards CYCLONIC BAGLESS VACUUM CLEANER - REV 4 Bedienungsanleitung

Morphy Richards

Morphy Richards POD VACUUM CLEANER Bedienungsanleitung

Morphy Richards

Morphy Richards PerformAir Upright Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards ESSENTIALS CYLINDER VACUUM CLEANER - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards 73380 Bedienungsanleitung

Morphy Richards

Morphy Richards Bagged cylinder Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards POD COMPACT BAGLESS VACUUM CLEANER - REV 2 Bedienungsanleitung

Morphy Richards

Morphy Richards Supervac gold Bedienungsanleitung

Morphy Richards

Morphy Richards IB73091 Bedienungsanleitung

Morphy Richards

Morphy Richards VC73410 MUK Bedienungsanleitung

Morphy Richards

Morphy Richards Boxer wet & dry vacuum cleaner Bedienungsanleitung

Morphy Richards

Morphy Richards IB71061 Bedienungsanleitung

Morphy Richards

Morphy Richards 70316 Bedienungsanleitung

Morphy Richards

Morphy Richards BIG POD BAGLESS VACUUM CLEANER - REV 2 Bedienungsanleitung

Morphy Richards

Morphy Richards Ecovac 70096 Rev 2 (Page 1) Bedienungsanleitung

Morphy Richards

Morphy Richards IB73301 Bedienungsanleitung

Morphy Richards

Morphy Richards Bagged cylinder Vacuum Bedienungsanleitung

Morphy Richards

Morphy Richards IB73190 Bedienungsanleitung

Morphy Richards

Morphy Richards ORB Pets Cyclone Bedienungsanleitung

Morphy Richards

Morphy Richards Supervac Deluxe Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch