Moxa Technologies NPort 5100A Series Bedienungsanleitung

P/N: 1802051000024

*1802051000024*

NPort 5100A Series

Quick Installation Guide

Version 3.3, December 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

NPort 5100A series device servers are compact, palm-sized data

communication devices that allow you to control RS-232 (NPort 5110A),

RS-422/485 (NPort 5130A), and RS-232/422/485 (NPort 5150A) serial

devices over a TCP/IP-based Ethernet.

NOTE

“-T” indicates an extended temperature model.

Package Checklist

Before installing the NPort 5100A series device server, verify that the

package contains the following items:

•1 NPort 5100A serial device server

•100 to 240 VAC power adapter (excluding T models)

•4 stick-on pads

•Quick Installation Guide

•Product Warranty Statement

Optional Accessories

•DK-35A: DIN-Rail Mounting Kit (35 mm)

NOTE

Notify your sales representative if any of the above items are

missing or damaged.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this range,

please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A). Moxa has power adapters

with wide temperature range (

-40 to 75°C, -40 to 167°F), the

PWR-12150-(plug type)-SA-T series, for your reference.

Hardware Introduction

As shown in the following figures, NPort 5100A series device servers

have one male DB9 port for transmitting RS-232 (NPort 5110A), RS-

422/485 (NPort 5130A), or RS-232/422/485 (NPort 5150A) serial data.

- 3 -

NOTE

The NPort 5110A, NPort 5130A, and NPort 5150A have the

same form factor.

Reset Button—Press and hold the Reset button for 5 seconds to load

factory defaults: Use a pointed object, such as a straightened paper clip

or toothpick, to depress the reset button. This will cause the Ready LED

to blink on and off. The factory defaults will be loaded once the Ready

LED stops blinking (after about 5 seconds). At this point, release the

reset button.

LED Indicators—The NPort 5100A’s top panel has three LED

indicators, described in the following table.

LED

Name

LED

Color

LED Function

Ready

Red

Steady on:

Power is on and the NPort is booting up.

Blinking:

Indicates an IP conflict, or DHCP or

BOOTP server is not responding properly.

Green

Steady on:

Power is on and the NPort is functioning

normally.

Blinking: The NPort has been located by the NPort

Administrator’s Location function.

Off

Power is off, or a power error.

Link

Orange

10 Mbps Ethernet connection.

Green

100 Mbps Ethernet connection.

Off

Ethernet cable is disconnected.

Tx/Rx

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

Data is not being transmitted or received through the

serial port.

Adjustable pull high/low resistor for RS-422/485 (150 KΩ or 1

KΩ)

Jumpers are used to set the pull high/low

resistor values. The default is 150 KΩ. Short

the jumpers to set this value to 1 KΩ. Do not

use the

1 KΩ setting with RS-

232 mode, since

doing so will degrade the RS

-232 signals and

orten the communication distance.

- 4 -

Hardware Installation Information

STEP 1: After removing the NPort 5100A series device server from the

box, connect the NPort 5100A series device server to a network. Use a

standard straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5100A series device server, you

might find it convenient to connect directly to your computer’s Ethernet

port. In this case, use a cross-over Ethernet cable.

STEP 2: Connect the NPort 5100A series device server’s serial port to a

serial device.

STEP 3: Connect the power adaptor.

STEP 4: Placement options.

In addition to placing the NPort 5100A on a desktop or other horizontal

surface, you may also make use of the DIN-Rail or Wall Mount options,

as illustrated below.

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is out of this range, please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A). Moxa has power adapters

with wide temperature range (

-40 to 75°C, -40 to 167°F), the

PWR-12150-(plug type)-SA-T series, for your reference.

Wall Mount

DIN-Rail

Software Installation Information

For the NPort’s configuration, the default IP address of the NPort is:

LAN: Static IP = 192.168.127.254; netmask = 255.255.255.0

You may log in with the default account and password (account:

admin; password: moxa) to change any settings to meet your

network topology (e.g., IP address) or serial device (e.g., serial

parameters). If you would like to apply the Real COM mode to your

application, you will need to install NPort’s driver on your desktop. You

may also refer to Moxa’s support website

https://www.moxa.com/support for the user’s manual, driver, SNMP

MIB, and NPort Search Utility.

- 5 -

NOTE

For the NPort with DB Male serial ports, you may refer to DB9

Male Ports pin assignment section to loop back pin 2 and pin 3

for the RS-232 interface to carry out a self test on the device.

Pin Assignments

Ethernet Port Pinouts

Pin No.

Ethernet

Tx+

Tx-

Rx+

Rx-

NPort 5110A—DB9 male (RS-232) port pinouts

Pin No.

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

–

NPort 5130A—DB9 male (RS-422/485) port pinouts

Pin No.

RS-422/485-

RS-485-2W

TXD-(A)

–

TXD+(B)

–

RXD+(B)

Data+(B)

RXD-(A)

Data-(A)

GND

–

NPort 5150A—DB9 male (RS-232/422/485) port pinouts

Pin No.

RS-232

RS-422/485-

RS-485-2W

DCD

TXD-(A)

–

RxD

TXD+(B)

–

TxD

RXD+(B)

Data+(B)

DTR

RXD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

- 6 -

Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption NPort 5110A:

82.5 mA @ 12V, 47.3 mA @ 24V

NPort 5130A:

89.1 mA @ 12V, 49.5 mA @ 24V

NPort 5150A:

92.4 mA @ 12V, 52.8 mA @ 24V

Environmental Limits

Operating Temperature

Standard Models:

0 to 60°C (32 to 140°F)

Wide Temp. Models:

-40 to 75°C (-40 to 167°F)

Ambient Humidity

5 to 95% RH

Dimensions

With ears

75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in)

Without ears

52 x 80 x 22 mm (2.05 x 3.15 x 0.89 in)

Protection

Serial Line Protection

Level 1 Surge, EN 61000-4-5

Magnetic Isolation

1.5 kV for Ethernet

Power Line Protection

Level 2 Burst (EFT), EN 61000-4-4

Level 3 Surge, EN 61000-4-5

Regulatory Approvals

FCC Class A, CE Class A, UL, LVD

Andere Handbücher für NPort 5100A Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21A series Handbuch

Moxa Technologies

Moxa Technologies UPort 2210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 25 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1400 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CSM-200-1213 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME51 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 364 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-120 Handbuch

Moxa Technologies

Moxa Technologies IMC-21GA-T Handbuch

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1200 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-80 V2.2 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-82 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101G Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-RM Series Handbuch

Moxa Technologies

Moxa Technologies ICF-1171I Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung