Moxa Technologies UPORT 1200 series Bedienungsanleitung

P/N: 1802014000018

*1802014000018*

UPort 1200/1400/1600

Quick Installation Guide

USB-to-Serial Converter

Edition 9.0, November 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

Moxa’s USB-to-serial product provides a wide range of easy-to-use

solutions for adding Windows COM ports and Linux tty ports through a

PC’s USB port.

The UPort 1200/1400/1600 series are the following models:

•UPort 1250: 2-port RS-232/422/485 USB-to-serial converter

•UPort 1250I: 2-port RS-232/422/485 USB-to-serial converter w/

isolation protection

•UPort 1410: 4-port RS-232 USB-to-serial converter

•UPort 1450: 4-port RS-232/422/485 USB-to-serial converter

•UPort 1450I: 4-port RS-232/422/485 USB-to-serial converter w/

isolation protection

•UPort 1610-8: 8-port RS-232 USB-to-serial converter

•UPort 1650-8: 8-port RS-232/422/485 USB-to-serial converter

•UPort 1610-16: 16-port RS-232 USB-to-serial converter

•UPort 1650-16: 16-port RS-232/422/485 USB-to-serial converter

Before connecting UPort USB-to-serial converters to your computer’s

USB port, we recommend installing the UPort driver first. To do this,

follow the installation procedure described in the “Installing the UPort

1200/1400/1600 Driver” section below. The installation procedure was

done on a PC running a Windows platform. UPort converters can be

connected to any upstream type A USB port that is on the PC host or on

an upstream hub. UPort converters are hot pluggable, and therefore

there is no need to power down your computer prior to installation.

After installing the driver, connect the UPort to an upstream host or

hub. The Found New Hardware wizard will locate the appropriate

drivers automatically. Once the drivers are found, various windows will

pop up as the UPort’s serial port is being installed. When the Found

New Hardware Wizard finishes installing the UPort, use the operating

system’s Device Manager to check and/or modify the port settings.

The new COM port will be listed under Ports (COM & LPT).

Ordering Information

Package Checklist

Before installing the UPort, verify that the package contains the

following items:

•1 UPort 1200/1400/1600 USB-to-serial converter

•USB cable: CBL-USBA/B-100

•100 to 240 VAC power adapter (excluding T models, UPort

1250/1410)

•1 power cord suitable for your region (excluding T models, UPort

1250/1410)

•1 serial adapter: mini DB9F-to-TB (excluding UPort 1410/1610

series)

•WK-44-01: 19” rackmount L brackets (2 L-shaped plates with 8

screws; for UPort 1600-16 series)

•Quick installation guide (printed)

•Warranty card

NOTE

Notify your sales representative if any of the above items is

missing or damaged.

- 3 -

NOTE

The operating temperature of the power adapter in the box is

from 0 to 40°C. If your application is

not in this range, please

use a power adapter supplied by UL Listed External Power

Supply (The power output meets SELV and LPS and rated 12

48 VDC, minimum current 0.73 A). Moxa has power adapters

with wide temperature range (

-40 to 75°C, -40 to 167°F), the

PWR-12150-(plug type)-SA-T series, for your reference.

Installing the UPort 1200/1400/1600 Driver

1. Run the Setup program which you may find on Moxa’s support

website http://www.moxa.com/support/. Click Next to start

installing the driver.

2. Click Next to install the driver in the indicated folder.

- 4 -

3. Click Install to proceed with installation.

4. Then click Finish to complete the driver installation.

WARNING

1. This unit is not intended for consumer use. It will only be

shipped to manufacturers or factories.

2. The DC source should come from a class external adapter

or a 12 to 48 VDC safety extra-low voltage (SELV) limited

power source (LPS), using a transfer device.

3. This unit should be installed or set up by a qualified

service person.

1. Refer to the table below to see if external power is needed for your

UPort. If applicable, connect the UPort to an external power source.

UPort

1250

UPort

1250I

UPort

1400

UPort

1600-8

UPort

1600-16

Bus Power



–



–

External

Power

(adapter)

– –

External

Power (cord)

– – – – 

2. Connect the UPort to the PC using the USB cable.

3. After turning your PC’s power on, Windows will automatically detect

the UPort.

4. Case 1: The UPort Driver is Certified

If the UPort driver that you installed has been certified by Microsoft,

the UPort and the UPort’s serial ports will be installed automatically

when you plug the UPort into your computer’s USB port.

Case 2: The UPort Driver is NOT Certified

If the UPort driver that you installed has not been certified by

Microsoft, then plugging the driver into your computer’s USB port

will activate the UPort installation program. The first part of the

installation procedure installs the software for the UPort itself (the

second part of the procedure installs the serial ports).

- 5 -

Click Next to start the installation process.

5. Select Install the software automatically (Recommended)

6. The window that opens next cautions you that although this

software has not passed Windows logo testing, this driver has

already been tested and demonstrated that it supports the Windows

OS. Click Continue Anyway to proceed and then click Finish to

complete the driver installation.

7. Repeat steps 4 to 6 until all COM ports are installed.

- 6 -

Installing the Linux Kernel 2.6.x and 3.x Driver

First obtain the Linux driver file

driv_linux_uport_v1.x_build_xxx.tgz from the Moxa’s website at

http://www.moxa.com. Save the driver file to a specific directory, such

as /moxa, and then execute the commands listed below:

# cd /moxa

# tar xvfz driv_linux_uport_v1.x_build_xxx.tgz

# make

# make install

# modprobe mxuport

#ls /dev/ttyMXUSB*

Serial Port Pin Assignments

The serial ports on the UPort 1200/1400/1600 have DB9 male

connectors. Refer to the following table below for the RS-232 and RS-

422/485 pin assignments.

NOTE

For UPort with DB Male Serial Ports, you may refer to DB9 Male

Ports pin assignment section to loop back pin 2 and pin 3 for

the RS-232 interface to carry out a self test on the device.

Male DB9

Pin RS-232 RS-422/

RS-485 4W

RS-485 2W

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Power Input Specifications

UPort 1250

5 VDC (bus power), 360 mA

UPort 1250I

12 to 48 VDC, 200 mA (max. in 12 VDC)

UPort 1410/1450

12 to 48 VDC (external) or 5 VDC (bus power), 260

mA (max. in 12 VDC)

UPort 1450I

12 to 48 VDC, 360 mA (max. in 12 VDC)

UPort 1600-8

12 to 48 VDC, 340 mA (max. in 12 VDC)

UPort 1600-16

100 to 240 VAC, 150 mA (max. in 100 VAC)

Andere Handbücher für UPORT 1200 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PTC-101 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 25 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5118 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-141-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-80I Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-RM Series Handbuch

Moxa Technologies

Moxa Technologies TCF-142-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 451 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPORT 1100 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1280I Series Handbuch

Moxa Technologies

Moxa Technologies TCF-142-S Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 461 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 251 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CSM-200-1213 Bedienungsanleitung

Moxa Technologies

Moxa Technologies A50 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NE-4100 Series Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung