Moxa Technologies NE-4100 Series Bedienungsanleitung

P/N: 1802041000302

*1802041000302*

NE-4100 Series

Quick Installation Guide

Version 5.1, December 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The MOXA NE-4100 Series of Network Enablers are serial-to-Ethernet

embedded modules that come in 3 types: drop-in type (NE-4100T),

RJ45 type (NE-4110S/A), and pin-header type (NE-4120S/A). MOXA

provides a Starter Kit for each NE-4100 series module. Each Starter Kit

contains an evaluation board that can be used to evaluate the modules

and to develop applications. The following table lists the model names

of all NE-4100 Series modules, along with the model names of the

corresponding Starter Kits.

Starter Kit

Model Names

NE-4100 Series Model Names

Standard

Programmable

NE-4100-ST

NE-4100T

NE-4100T-P

NE-4110-ST

NE-4110S

NE-4110S-P

NE-4110A

NE-4110A-P

NE-4120-ST

NE-4120S

NE-4120S-P

NE-4120A

NE-4120A-P

Package Checklist

Each NE-4100 series starter kit package contains the following items:

•1 NE-4100 series evaluation board

•1 universal power adaptor

•2 power cords

•1 null modem serial cable

•1 cross-over Ethernet cable

•1 quick installation guide (printed)

•1 warranty card

Notify your sales representative if any of the above items is missing or

damaged.

- 3 -

Hardware Installation Procedure

Follow these steps to prepare the module and evaluation board for

testing and application development.

STEP 1:

Plug the NE-4100 module into the sockets on the top of the

evaluation board.

NE-4100-ST:

After attaching the module to the evaluation board, the triangles on the

module and evaluation board should line up.

NE-4100-ST Starter Kit

NE-4110-ST:

The module and evaluation board have two jumper arrays, each with a

pin labeled 1. Be sure to connect the correct Pin 1 on the module to the

correct Pin 1 on the evaluation board.

NE-4110-ST Starter Kit

- 4 -

NE-4120-ST:

The module and evaluation board have two jumper arrays, each with a

pin labeled 1. Be sure to connect the correct Pin 1 on the module to the

correct Pin 1 on the evaluation board.

NE-4120-ST Starter Kit

NOTE

For detailed information about the pin assignments, wiring, LED

indicators, and board layouts, refer to Chapter 2 of the NE

4100 Series User’s Manual.

STEP 2:

Connect the 12 VDC power line with the evaluation board’s

power jack.

STEP 3:

Use an RJ45 Ethernet cable to connect the NE evaluation

board plus module to an Ethernet network. Note that for NE

4100T and NE

4120, the RJ45 Ethernet port is located on the

evaluation board. For NE

-4110, the RJ45 Ethernet port is

located on the m

odule itself.

STEP 4:

Use the serial data cable to connect the evaluation board to a

serial device.

STEP 5:

For NE-4110-ST and NE-4120-ST, use jumper JP2 on the

evaluation board to select the proper serial interface. See

pages 3

-6 and 3-7 of the NE-4100 Series User’s Manual for

details.

- 5 -

Software Utility Installation Procedure

NE-4100 Module

Software Installation

1. Start the “Network Enabler Administrator” setup program to begin

the installation. When the Welcome window opens, click on Next.

2. When the Select Additional Tasks window opens, click on Next.

3. Click on Install to install program files in the default directory.

4. The Installing window reports the progress of the installation.

5. Click on Finish to complete the installation.

Module Configuration

1. Start the “Network Enabler Administrator” program.

2. Click on Configuration from the menu bar, and then select

Broadcast Search from the drop-down menu.

3. After the search is finished, all NE-4100 modules that were found

will be shown in the right panel of the Configuration window. If

you locate more than one module connected to this network, refer

to the MAC address on the module(s) to determine which modules

are the ones you wish to configure.

4. Refer to pages 7-6 to 7-19 of the NE-4100 Series User’s Manual

for additional configuration instructions.

NE-4100 Programmable Module

Software Installation

1. Start the “Network Enabler SDK” setup program to begin the

installation. When the Welcome window opens, click on Next.

2. Select the target directory, and then click on Next when the

Select Destination Directory window opens.

3. Click on Next when the Select Additional Tasks window opens.

4. Click on Install. The Installing window will report the progress of

the installation.

5. Click on Finish to complete the installation.

Module Configuration

1. Start the “NE SDK Manager” program.

2. Click on Search from the menu bar, and then select Broadcast

Search from the drop-down menu.

3. After the search is finished, all NE-4100-P modules that were

found will be shown in the NE SDK Manager window. Refer to the

“Network Enabler SDK 2 Programmer’s Guide” for additional

information about setting environment variables and developing

applications with NE-4100-P Series products.

- 6 -

Reference Material

The following detailed user’s guides can be downloaded from Moxa’s

product page under the NE-4100 Series’ product page.

NE-4100 Standard Module

•NE-4100 Series User’s Manual

NE-4100-P Series

•Network Enabler SDK 2 Programmer’s Guide

•Network Enabler SDK 2 API Reference

Andere Handbücher für NE-4100 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Medienkonverter Handbücher

Moxa Technologies

Moxa Technologies Media Converter Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-21GA Handbuch

Moxa Technologies

Moxa Technologies VPort 364 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IMC-101 Series Handbuch

Moxa Technologies

Moxa Technologies VPort 2141 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Z2150 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCC-120 Handbuch

Moxa Technologies

Moxa Technologies Transio TCC-82 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ME50-M-SC Bedienungsanleitung

Moxa Technologies

Moxa Technologies TCF-142-M-ST Bedienungsanleitung

Moxa Technologies

Moxa Technologies ICF-1150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 25 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 1400-G2 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-80I Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio TCC-80 V2.2 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UPort 2210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 254 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MGate 5118 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 354 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Transio A52 Bedienungsanleitung

Moxa Technologies

Moxa Technologies A50 Bedienungsanleitung

Moxa Technologies

Moxa Technologies PTC-101 Series Handbuch

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung