MR MSENSE BM Bedienungsanleitung

Monitoring system

MSENSE® BM

Operating instructions

5089542/12 EN

Dissemination and reproduction of this document and use and disclosure of its content are strictly prohibited

unless expressly permitted.

utility models or designs.

The product may have been altered since this document was published.

We reserve the right to change the technical data, design and scope of supply.

Generally the information provided and agreements made when processing the individual quotations and orders

are binding.

The original operating instructions were written in German.

Table of contents

Maschinenfabrik Reinhausen GmbH 2022 35089542/12 EN MSENSE® BM

Table of contents

1 Introduction......................................................................................................................... 9

1.1 Manufacturer....................................................................................................................................... 9

1.2 Completeness..................................................................................................................................... 9

1.3 Safekeeping........................................................................................................................................ 9

1.4 Notation conventions .......................................................................................................................... 9

1.4.1 Hazard communication system .............................................................................................................................9

1.4.2 Information system..............................................................................................................................................11

1.4.3 Instruction system ...............................................................................................................................................11

1.4.4 Typographic conventions ....................................................................................................................................12

2 Safety................................................................................................................................. 13

2.1 Appropriate use ................................................................................................................................ 13

2.2 Inappropriate use.............................................................................................................................. 14

2.3 Fundamental safety instructions....................................................................................................... 14

2.4 Personnel qualification...................................................................................................................... 16

2.5 Personal protective equipment ......................................................................................................... 17

3 IT security.......................................................................................................................... 19

3.1 General............................................................................................................................................. 19

3.2 Commissioning ................................................................................................................................. 19

3.3 Operation.......................................................................................................................................... 20

3.4 Interfaces.......................................................................................................................................... 20

3.5 Encryption standards........................................................................................................................ 23

4 Product description.......................................................................................................... 26

4.1 MSENSE®BM monitoring system versions..................................................................................... 26

4.2 Scope of delivery .............................................................................................................................. 26

4.3 Function description of MSENSE® BM-C......................................................................................... 26

4.4 Function description of MSENSE® BM-T......................................................................................... 27

4.5 Performance features ....................................................................................................................... 28

4.6 Operating modes .............................................................................................................................. 29

4.7 Design............................................................................................................................................... 30

4.7.1 Bushing adapter and bushing coupling unit ........................................................................................................31

4.7.2 Control cabinet ....................................................................................................................................................31

4.7.3 ISM® assemblies ................................................................................................................................................32

Table of contents

Maschinenfabrik Reinhausen GmbH 202245089542/12 ENMSENSE® BM

5 Packaging, transport and storage .................................................................................. 44

5.1 Packaging......................................................................................................................................... 44

5.1.1 Suitability.............................................................................................................................................................44

5.1.2 Markings..............................................................................................................................................................45

5.2 Transportation, receipt and handling of shipments........................................................................... 46

5.3 Storage of shipments........................................................................................................................ 47

5.4 Unpacking shipments and checking for transportation damages ..................................................... 48

6 Mounting ........................................................................................................................... 51

6.1 Preparation ....................................................................................................................................... 51

6.2 Installing the bushing adapter........................................................................................................... 52

6.3 Installing the bushing coupling unit................................................................................................... 55

6.4 Mounting the control cabinet............................................................................................................. 57

6.5 Installing the cap rail modules .......................................................................................................... 61

6.5.1 Minimum distances .............................................................................................................................................61

6.5.2 Fastening the cap rail..........................................................................................................................................62

6.5.3 Installing the bus rail on the cap rail....................................................................................................................63

6.5.4 Installing the assembly at a distance on the cap rail...........................................................................................64

6.5.5 Wiring the CPU I / CPU II assembly....................................................................................................................65

6.5.6 Wiring the UI assembly .......................................................................................................................................67

6.5.7 Wiring the DIO assembly ....................................................................................................................................69

6.5.8 Wiring the MC 2-2/SW3-3 assembly ...................................................................................................................73

6.5.9 Wiring the QS3.241 assembly.............................................................................................................................76

6.6 Connecting the device ...................................................................................................................... 79

6.6.1 Cable recommendation .......................................................................................................................................79

6.6.2 Information about connecting serial interfaces RS232 and RS485 (with 9-pin data cable) ................................79

6.6.3 Information about connecting serial interfaces RS232 and RS485 (with RJ45 data cable)................................81

6.6.4 Information about laying fiber-optic cable ...........................................................................................................82

6.6.5 Connecting the bushing adapter to the bushing coupling unit ............................................................................83

6.6.6 Connecting the bushing coupling unit to the control cabinet...............................................................................84

6.6.7 Connecting the voltage transformers for the reference system ..........................................................................87

6.6.8 Connecting additional leads (optional) ................................................................................................................89

6.6.9 Connecting the power supply..............................................................................................................................91

6.7 Checking functional reliability ........................................................................................................... 92

7 Commissioning................................................................................................................. 93

7.1 Determining the capacitance of the bushings with BM-C ................................................................. 93

Table of contents

Maschinenfabrik Reinhausen GmbH 2022 55089542/12 EN MSENSE® BM

7.2 Determining the capacitance and dissipation factor of the bushings with BM-T............................... 93

7.3 Setting the language......................................................................................................................... 93

7.4 Setting date and time........................................................................................................................ 94

7.5 Setting the parameters ..................................................................................................................... 94

7.5.1 Commissioning wizard ........................................................................................................................................94

7.5.2 Setting the parameters manually ........................................................................................................................95

7.6 Performing standardization............................................................................................................... 97

7.7 Performing tests................................................................................................................................ 97

7.7.1 Ground test .........................................................................................................................................................97

7.7.2 Performing function tests ....................................................................................................................................98

7.7.3 High-voltage tests on the transformer .................................................................................................................98

7.7.4 Dielectric tests on transformer wiring ..................................................................................................................99

8 Operation......................................................................................................................... 100

8.1 Establishing a connection to the visualization (with CPU I / CPU II) .............................................. 100

8.2 Establishing a connection to the visualization (with CPU / COM-ETH) .......................................... 101

8.3 Operating concept .......................................................................................................................... 103

8.4 General........................................................................................................................................... 105

8.4.1 Setting general device functions .......................................................................................................................106

8.4.2 Set up automatic logout ....................................................................................................................................107

8.4.3 Activating/deactivating service user access......................................................................................................108

8.4.4 Setting SNMP....................................................................................................................................................109

8.5 Configuring the network.................................................................................................................. 110

8.6 MQTT.............................................................................................................................................. 113

8.7 Setting the device time ................................................................................................................... 115

8.8 Configuring syslog .......................................................................................................................... 118

8.9 SCADA ........................................................................................................................................... 120

8.9.1 Configuring IEC 61850 (optional)......................................................................................................................120

8.9.2 Configuring IEC 60870-5-101 (optional) ...........................................................................................................122

8.9.3 Configuring IEC 60870-5-103 (optional) ...........................................................................................................125

8.9.4 Configuring IEC 60870-5-104 (optional) ...........................................................................................................127

8.9.5 Configuring Modbus (optional) ..........................................................................................................................129

8.9.6 Configuring DNP3 (optional) .............................................................................................................................131

8.9.7 Configure data points (optional) ........................................................................................................................133

8.10 Setting the measured value recorder.............................................................................................. 141

Table of contents

Maschinenfabrik Reinhausen GmbH 202265089542/12 ENMSENSE® BM

8.11 Linking signals and events.............................................................................................................. 142

8.11.1 Linking digital outputs........................................................................................................................................142

8.11.2 Linking control system messages .....................................................................................................................143

8.12 Setting the transformer data for the reference system (optional) ................................................... 145

8.13 Circuit breaker monitoring............................................................................................................... 146

8.14 Configuring bushing monitoring...................................................................................................... 146

8.14.1 Set the field designation....................................................................................................................................146

8.14.2 Configuring capacitance monitoring..................................................................................................................147

8.14.3 Configuring dissipation factor monitoring (MSENSE® BM-T)...........................................................................151

8.14.4 Sum current method..........................................................................................................................................154

8.15 Displaying the state of the bushings............................................................................................... 156

8.16 Displaying the capacitance progression ......................................................................................... 157

8.17 Show dissipation factor curve (MSENSE® BM-T).......................................................................... 157

8.18 Displaying sum current information ................................................................................................ 158

8.19 Displaying measured value recorder (optional) .............................................................................. 159

8.20 Configuring digital inputs and outputs............................................................................................. 160

8.21 Event management......................................................................................................................... 162

8.21.1 Displaying and acknowledging events ..............................................................................................................162

8.21.2 Configuring events ............................................................................................................................................163

8.21.3 Displaying event memory..................................................................................................................................164

8.21.4 Exporting the event messages overview...........................................................................................................165

8.22 User administration......................................................................................................................... 166

8.22.1 User roles..........................................................................................................................................................166

8.22.2 Changing the password ....................................................................................................................................167

8.22.3 Creating, editing and deleting users..................................................................................................................168

8.22.4 Setting access rights to parameters and events ...............................................................................................170

8.22.5 User authentication via RADIUS (optional) .......................................................................................................171

8.23 Information about device ................................................................................................................ 174

8.23.1 Hardware...........................................................................................................................................................174

8.23.2 Software ............................................................................................................................................................174

8.24 Import/export manager ................................................................................................................... 176

8.24.1 Exporting data ...................................................................................................................................................176

8.24.2 Importing data (software version 3.753 and later).............................................................................................177

8.25 Configuring media converter with managed switch ........................................................................ 179

8.25.1 Commissioning..................................................................................................................................................179

8.25.2 Configuration.....................................................................................................................................................180

Table of contents

Maschinenfabrik Reinhausen GmbH 2022 75089542/12 EN MSENSE® BM

8.26 Transformer Personal Logic Editor (TPLE)..................................................................................... 182

8.26.1 Function ............................................................................................................................................................182

8.26.2 Configuring TPLE..............................................................................................................................................195

9 Inspection and maintenance ......................................................................................... 199

9.1 Care................................................................................................................................................ 199

9.2 Inspection ....................................................................................................................................... 199

9.3 Maintenance ................................................................................................................................... 199

10 Fault elimination ............................................................................................................. 200

10.1 General faults ................................................................................................................................. 200

10.2 Signal lights and digital outputs ...................................................................................................... 200

10.3 Human-machine interface............................................................................................................... 201

10.4 Other faults ..................................................................................................................................... 201

11 Uninstallation.................................................................................................................. 203

11.1 Removing the control cabinet ......................................................................................................... 203

11.2 Removing the bushing adapter and bushing coupling unit............................................................. 205

12 Disposal........................................................................................................................... 206

13 Technical data................................................................................................................. 207

13.1 Bushing adapter.............................................................................................................................. 207

13.2 Bushing coupling unit...................................................................................................................... 210

13.3 Connection cable............................................................................................................................ 211

13.4 Control cabinet................................................................................................................................ 211

13.5 ISM® assemblies............................................................................................................................ 212

13.5.1 Connection terminals ........................................................................................................................................212

13.5.2 Power supply.....................................................................................................................................................212

13.5.3 Central processing unit .....................................................................................................................................213

13.5.4 Voltage measurement and current measurement.............................................................................................218

13.5.5 Digital inputs and outputs..................................................................................................................................221

13.5.6 Analog inputs and outputs.................................................................................................................................231

13.5.7 System networking............................................................................................................................................235

14 Appendix ......................................................................................................................... 239

14.1 Measured log value of the bushings, field 1 ................................................................................... 239

14.2 Measured log value of the bushings, field 2 ................................................................................... 240

Table of contents

Maschinenfabrik Reinhausen GmbH 202285089542/12 ENMSENSE® BM

14.3 Dimensional drawings..................................................................................................................... 240

14.3.1 101335000 ........................................................................................................................................................241

14.3.2 101358630 ........................................................................................................................................................242

14.3.3 101334980 ........................................................................................................................................................243

14.3.4 101358640 ........................................................................................................................................................244

Glossary .......................................................................................................................... 245

List of key words ............................................................................................................ 246

1 Introduction

Maschinenfabrik Reinhausen GmbH 2022 95089542/12 EN MSENSE® BM

1 Introduction

This technical file contains detailed descriptions on the safe and proper in-

stallation, connection, commissioning and monitoring of the product.

It also includes safety instructions and general information about the prod-

uct.

This technical file is intended solely for specially trained and authorized per-

sonnel.

1.1 Manufacturer

Maschinenfabrik Reinhausen GmbH

Falkensteinstrasse 8

93059 Regensburg

Germany

Tel.: +49 941 4090-0

E-mail: [email protected]

Internet: www.reinhausen.com

MR Reinhausen customer portal: https://portal.reinhausen.com

Further information on the product and copies of this technical file are avail-

able from this address if required.

1.2 Completeness

This technical file is incomplete without the supporting documents.

The following documents are considered supporting documents:

▪ Operating instructions

▪ Connection diagrams

1.3 Safekeeping

Keep this technical file and all supporting documents ready at hand and ac-

cessible for future use at all times.

1.4 Notation conventions

1.4.1 Hazard communication system

Warnings in this technical file are displayed as follows.

1.4.1.1 Warning relating to section

Warnings relating to sections refer to entire chapters or sections, sub-sec-

tions or several paragraphs within this technical file. Warnings relating to

sections use the following format:

1 Introduction

Maschinenfabrik Reinhausen GmbH 202210 5089542/12 ENMSENSE® BM

WARNING Type of danger!

Source of the danger and outcome.

► Action

1.4.1.2 Embedded warning information

Embedded warnings refer to a particular part within a section. These warn-

ings apply to smaller units of information than the warnings relating to sec-

tions. Embedded warnings use the following format:

DANGER! Instruction for avoiding a dangerous situation.

1.4.1.3 Signal words and pictograms

The following signal words are used:

Signal word Definition

DANGER Indicates a hazardous situation which, if not avoided, will result in

death or serious injury.

WARNING Indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

NOTICE Indicates measures to be taken to prevent damage to property.

Table1: Signal words in warning notices

Pictograms warn of dangers:

Pictogram Definition

Warning of a danger point

Warning of dangerous electrical voltage

Warning of combustible substances

Andere Handbücher für MSENSE BM

Inhaltsverzeichnis

Andere MR Messgerät Handbücher

MR MESSKO EI100 Bedienungsanleitung

MR MSENSE BM Bedienungsanleitung

MR MESSKO MFLOC 2.0 Bedienungsanleitung

MR TAPGUARD 260 Bedienungsanleitung

MR MSENSE DGA 2 Bedienungsanleitung

MR TAPCON LV Bedienungsanleitung

MR MESSKO EI100 Bedienungsanleitung

MR MSENSE DGA 2/3 Bedienungsanleitung

MR MESSKO MTO Bedienungsanleitung

MR MSENSE BM Bedienungsanleitung

MR MESSKO MFLOC 2.0 Bedienungsanleitung

MR YD-200 Bedienungsanleitung

MR MESSKO BeTech Bedienungsanleitung

MR MSENSE DGA 9 Bedienungsanleitung

MR MESSKO PQ96 Bedienungsanleitung

MR MESSKO MMK Bedienungsanleitung

MR ETOS IM Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung