MRC UT-FLU5B Bedienungsanleitung
UT-FLU5B
FLUOROMETER
OPERATION MANUAL
3, Hagavish st. Israel 58817 Tel: 972 35595252, Fax: 972 3 5594529
MRC. 12.22
✓
Oil co Protein
,
II
Preface
Thank you for purchasing this product. This user manual contains the
functions and operation procedures of the instrument. In order to ensure the
correct use of the instrument, please read the manual carefully before
operating the instrument. Please keep the manual in a safe place so that you
can read it quickly if you encounter a problem.
Unpacking Inspection
When the user unpacks the instrument for the first time, please check
the instrument and accessories against the packing list. If the instrument or
accessories are found to be wrong, incomplete or abnormal, please contact
the seller or manufacturer.
III
Matters Needing Attention
1. Important Safety Operating Information
The user needs to have a complete understanding of how the instrument works
before operating the instrument safely. Users should read this manual carefully before
operating the instrument.
2.Safety
The following basic safety precautions must be observed during all operations,
maintenance, and repair of this instrument.Failure to observe these precautions or the
warnings noted elsewhere in this manual may affect the protection provided by the
instrument and the intended range of use of the instrument.
It is forbidden for anyone to operate the instrument without reading the
manual. If you do not follow the instructions in the manual, the
instrument may cause accidental injury during operation, and electric
shock may occur. Please read the following safety tips and guidance
carefully and implement all precautions contained therein.
This instrument is an ordinary device that complies with the GB4793.1
standard, and this instrument is the product for indoor use.
Please read this manual carefully before operating the instrument,
otherwise personal injury may be caused.Only qualified inspectors trained
in the installation and use of electrical equipment should operate this
instrument.
Except for the parts that can be opened by the user as specified in the
manual, it is strictly forbidden for the user to disassemble the instrument.
Failure to do so will void your warranty and may also expose you to electric
shock. If repair is required, the company is responsible for the repair.
This instrument is only used for scientific research experiments and is
not suitable for clinical testing!
CAUTION: Biological contamination. All test samples, quality controls,
calibrators, etc., should be considered infectious, and gloves should be worn
when contacting; parts that have been in contact with test samples should be
considered infectious, and gloves should be worn when touching;
IV
The instrument should be placed in a dry, dust-free place away from water
and direct sunlight and strong light sources. The room should be well
ventilated, free from corrosive gases or strong magnetic fields, and away
from heaters, stoves and all other heat sources. Do not place the instrument
in a humid or dusty place.
Nothing should be covered by the power cord when the instrument is in
use. Do not place the power cord where people move.
Be sure to hold the plug when plugging and unplugging the power cord.
Make sure that the plug is fully inserted into the socket when plugging in,
and do not pull the power cord hard when unplugging.
Turn off the power when it stops working. When the instrument is not used
for a long time, unplug the power plug and cover the instrument with a soft
cloth or plastic paper to prevent dust from entering.
In the following cases, the power plug of the instrument should be unplugged
from the power outlet immediately, and contact the supplier or a trained
service person to deal with it:Liquid spilled into the instrument;
The instrument is drenched or watered;
The instrument falls or the shell is damaged;
The function of the instrument has changed significantly.
V
Warranty Description
a) Warranty content
Within 1 month from the date of delivery of the instrument, the company will be
responsible for the replacement of the failure caused by defects in materials and
manufacturing.
The instrument is warranted against failures due to defects in material and
manufacture for a period of 12 months from the date of delivery. During the warranty
period, the company will selectively repair or replace instruments that prove to be
defective.
Warranted products must be sent by the user to the maintenance department
determined by the company. The shipping cost of the instrument from the user to the
maintenance department shall be paid by the user. The company bears the shipping cost of
returning the instrument to the user.
For repairs outside the warranty period, the company will properly charge the cost
of repairs.
b) Warranty range
The above warranty does not apply to damage caused by improper use and
maintenance by the user, use in non-compliant conditions, unauthorized repair or
modification.
─1─
Chapter Ⅰ Brief introduction
Fluorescence immunoassay technology has the advantages of strong specificity, high
sensitivity, and good practicability, so it is used to measure biologically active compounds
with very low content,such as proteins (enzymes, receptors, antibodies), nucleic acids,
hormones (steroids, thyroid hormones, phthalohormones), drugs and microorganisms.
This fluorometer is based on fluorescence immunoassay technology, which detects
the luminescence intensity of fluorescent reagents in immunoassays; Under the condition
of low concentration, the concentration of the sample and the fluorescence intensity have
a linear relationship, so the qualitative and quantitative analysis of the detected object is
carried out.
─2─
Chapter Ⅱ Features
Basic parameters and performanc
Normal working conditions
Ambient temperature: 4C 45C
Relative humidity: ≤70%
Power supply: DC 9V 1.5A
Battery:18650 Rechargeable lithium battery(3400mah*2，can last for 5 hours)
e
Specification:
Product name Light source Excitation
wavelength
Emission
wavelength
UT-FLU5B IFluorimeter Blue LED 460±20nm 525nm
Red LED 625±20nm 690nm
UT-FLU5B II Fluorimeter Blue LED 460±20nm 525nm
UV LED 365±20nm 470nm
UT-FLU5B III Fluorimeter Blue LED 460±20nm 525nm
Green LED 525±20nm 620nm
Else customized
Model
Parameters UT-FLU5B
light source Monochrome LED
Linearity 2
R>0.995
Repeatability <1.5%
Stability <1.5%
Sensitivity Ds DNA：1ng/ml；
Measuring speed 3s（single time）
Dimensions
(WXDXH) 194*155*72.5
Net weight (kg) 1.0Kg
─3─
Chapter Ⅲ Instrument composition
This chapter mainly introduces the structure of the instrument and the preparations before
it is turned on. When using the instrument for the first time, you should familiarize yourself
with the contents of this chapter before turning it on.
Structure diagram:
Figure 1 Instrument structure
USB export
Printer interface
USB port
Power socket
Switch
Display
Sample
cover
─4─
Chapter Ⅳ Instrument installation
1. Unpacking inspection
All fluorometers have been strictly inspected by the company before they are packaged
and shipped. When you receive the instrument, please check carefully before unpacking, and
pay attention to the following damages:
①The outer packaging is inverted or deformed;
②The outer package contains obvious traces of wet water;
③The outer package contains obvious signs of impact;
④signs that the outer packaging has been opened;
Once the above damage is found, please contact the company or notify the local agent
immediately.
If the outer package is in good condition, please open the package and check after
unpacking in the presence of agents and staff:
①According to the packing list, check whether all components are complete;
②Carefully check the appearance of all devices to see if there are cracks, bumps or
deformations.
2.Installation requirements
①Space: a dry, clean, level work surface.
②Working environment
a. The ambient air is clean and free of corrosive steam and smoke.
b. Ambient temperature between +10°C and +40°C.
3.Installation steps
①Place the instrument and packaging lightly on the operating site, open the carton, and then
take out the instrument and place it on the operating table.
②Put the "ON/OFF" switch on the back of the instrument to the "OFF" position. Take out the
15V power adapter, insert its plug into the socket at the rear of the instrument, and connect the
other end to the AC100~220V power supply.
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere MRC Messgerät Handbücher
MRC
MRC PS-9302 Bedienungsanleitung
MRC
MRC INE-PHSJ-5 Bedienungsanleitung
MRC
MRC SL-4035SD Bedienungsanleitung
MRC
MRC LX-1102 Bedienungsanleitung
MRC
MRC PSA-311 Bedienungsanleitung
MRC
MRC PC-6011SD Bedienungsanleitung
MRC
MRC DW-6163 Bedienungsanleitung
MRC
MRC REF Series Bedienungsanleitung
MRC
MRC LX-1148SD Bedienungsanleitung
MRC
MRC CALI-1200HN Bedienungsanleitung
MRC
MRC DW-6090 Bedienungsanleitung
MRC
MRC SL-4012 Bedienungsanleitung
MRC
MRC Explorer-9000 Bedienungsanleitung
MRC
MRC YK-23RP Bedienungsanleitung
MRC
MRC BCT-4308 Bedienungsanleitung
MRC
MRC CLRM-200 Bedienungsanleitung
MRC
MRC FA-46 Bedienungsanleitung
MRC
MRC PM-1064SD Bedienungsanleitung
MRC
MRC PS-9303SD Bedienungsanleitung
MRC
MRC TM-196 Bedienungsanleitung
