MuxLab Broadcast 500734 Bedienungsanleitung

94-000843-A

SE-000843-A

6G-SDI EXTENDER OVER FIBER

500734

500734-SM10

500734-SM40

500734-SM80

Installation & Operation Manual

Page 2

Printed in Canada. No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise without prior written permission of the author.

Trademarks:

MuxLab Broadcast is a registered trademark of MuxLab Inc.

Page 3

Table of Contents

1. Overview.........................................................................4

1.1. Description..............................................................4

1.2. Features...................................................................7

2. Technical Specifications ................................................9

3. Installation Procedure.................................................11

3.1. Parts List ...............................................................11

3.2. Product Overview .................................................12

3.3. Physical Installation..............................................14

3.4. Installation & Power-up Procedure.......................18

3.5. Supported Video Modes........................................20

3.6. SDI Input Connections..........................................21

3.7. SDI Output Connections.......................................21

4. Firmware Upgrade Procedure....................................22

4.1. Firmware Upgrade Procedure ...............................22

4.2. USB Driver Setup .................................................25

5. Unit Control and Status...............................................28

6. Troubleshooting ...........................................................29

7. Appendix.......................................................................31

A. ASCII Command Set.............................................31

8. Product Warranty Policy............................................37

Page 4

Overview

1.1.

Description

The 6G-SDI Extender over Fiber Optic with Return Channel is a

unique solution from MuxLab for extending SDI cameras or other

SDI sources up to 4K resolutions at 30Hz to a distance of up to

1300ft (400m) using OM4 multi-mode fiber (model 500734),

33,000ft (10km) using single-mode fiber (model 500734-SM10),

132,000ft (40km) using single-mode fiber (model 500734-SM40),

and 264,000ft (80km) using single-mode fiber (model 500734-

SM80).

The product supports multichannel transmission, and can

simultaneously transmit up to 9Gbps of data throughput over the

fiber link, and allows for versatile combinations of sources,

including 6G-SDI, 3G-SDI and HD-SDI. The unit supports

simultaneous transmission of mixed signals such as one 6G-SDI

signal + one 3G-SDI, or three 3G-SDI signals, or two 3G-SDI

signals + two HD-SDI signals, and many other combinations up to

9Gbps. The device supports one input and one output SDI port,

plus three directional SDI ports that can be individually configured

as input or output, or set to automatic direction detection. This

flexibility allows for up to four source ports and one return

channel, or up to one source port and four return channels, or

anything in between. The SDI return channel may be used for AV

monitoring and talk-back, while the RS232 pass-through supports

return of tally light, camera control unit (CCU) and control of end

devices.

Page 5

Figure 1 System Connectivity Overview

Page 6

Typical Applications:

•Video (cinema) production

•Studio broadcasting production

•Studio to Studio

•Mobile video (broadcasting vehicle)

•News coverage and live events

•Post production

Page 7

1.2.

Features

•Up to 1300ft (400m) via multimode OM4 fiber and

up to 264,000ft (80km) via singlemode fiber.

•Supports multichannel transmission, and can

simultaneously transmit up to 9Gbps of data traffic

on the fiber link.

•Accepts mixed signal transmission of up to one 6G-

SDI signal + one 3G-SDI signal, three 3G-SDI

signals, or two 3G-SDI signals + two HD-SDI

signals, and many other combinations up to 9Gbps,

and in any direction, including the return channels.

•Supports one input and one output SDI port, plus

three configurable directional SDI ports that can be

individually configured as input or output, or set to

automation direction detection.

•Supports up to four source ports and one return

channel, or up to one source port and four return

channels, or any combination in between. The SDI

return channel may be used for AV monitoring and

talk-back.

•Supports RS232 pass-through for remote control,

and as a return channel for tally light and for a

camera control unit (CCU).

•Maximum resolution supported: 4096x2160 @

24/25Hz, 3840x2160 @ 30Hz.

•Supported SMPTE Standards: SMPTE-292M, SMPTE-

296M, SMPTE-372M, SMPTE-424M, SMPTE-425M.

Page 8

•Supports all 6G channel configurations (1, 2 or 4

BNC).

•Automatic SDI Link recognition and configuration.

•USB interface may be used for setting the three

directional SDI ports to a fixed direction, or to set

them to automatic direction detection mode. The

USB port is also used for diagnostics, and

upgrading the unit firmware.

•Supports a standard 10G SFP+ module for the

optical fiber interface.

•Supports an aluminum casting enclosure for

ruggedized use.

•Multiple ¼”-20 threads for Camera mounting or

equipment attachment.

Page 9

Technical Specifications

Specifications

Environment

HD/3G/6G-SDI Digital Signal Transmission

Enclosures

Measurements

Tx: 110mm (4.3”) x 110mm (4.3”) x 32mm (1.25”)

Rx: 110mm (4.3”) x 110mm (4.3”) x 32mm (1.25”)

Color

Black

Control

Serial Terminal Emulation with USB Interface

Distance

•Model 500734: Up to 985ft (300m) via OM3

multimode fiber and 1300ft (400m) via OM4

multimode fiber.

•Model 500734-SM10: Up to 33,000ft (10km) via

singlemode fiber.

•Model 500734-SM40: Up to 132,000ft (40km) via

singlemode fiber. Requires a 5dB attenuator for

distances less than 33,000ft (10km).

•Model 500734-SM80: Up to 264,000ft (80km) via

singlemode fiber. Requires a 10dB attenuator for

distances less than 115,500ft (35km).

Compliance

FCC, CE, RoHS

Power

12VDC, 1.25Amp

External Power Supply with US, UK & Euro blades

Temperature

Operating: 0° to 40°C Storage: -20° to 85°C

Humidity: Up to 95% non-condensing

Table 1 Specifications

Page 10

Transmitter Connectivity

Front Side

1x BNC SDI Input Connector (0.8V pp, 75 ohms)

1x BNC SDI Output Connector (0.8V pp, 75 ohms)

3x BNC SDI Directional Connectors (0.8V pp, 75 ohms)

Rear Side

1x SFP+ Module Connector

1x Terminal Block for RS232 Interface

Lower Side

1x Power Connector (12VDC, 1.25Amp)

Top Face

1x Mini USB for Firmware Updates, plus Control & Status

Table 2 Transmitter Connectivity

Receiver Connectivity

Front Side

1x BNC SDI Input Connector (0.8V pp, 75 ohms)

1x BNC SDI Output Connector (0.8V pp, 75 ohms)

3x BNC SDI Directional Connectors (0.8V pp, 75 ohms)

Rear Side

1x SFP+ Module Connector

1x Terminal Block for RS232 Interface

Lower Side

1x Power Connector (12VDC, 1.25Amp)

Top Face

1x Mini USB for Firmware Updates, plus Control & Status

Table 3 Receiver Connectivity

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500041-WP-UK Bedienungsanleitung

MuxLab

MuxLab VideoEase Bedienungsanleitung

MuxLab

MuxLab 500450-LR Bedienungsanleitung

MuxLab

MuxLab 500459 Bedienungsanleitung

MuxLab

MuxLab 500458-ARC Bedienungsanleitung

MuxLab

MuxLab 500402 Bedienungsanleitung

MuxLab

MuxLab 500757 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500502 Bedienungsanleitung

MuxLab

MuxLab 500850 Bedienungsanleitung

MuxLab

MuxLab 100509 Bedienungsanleitung

MuxLab

MuxLab 500462 Bedienungsanleitung

MuxLab

MuxLab 500390 Bedienungsanleitung

MuxLab

MuxLab 500760-KVM Bedienungsanleitung

MuxLab

MuxLab 500759 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500772 Bedienungsanleitung

MuxLab

MuxLab 500401-WP-US Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab 500759-TX-Dante Bedienungsanleitung

MuxLab

MuxLab 500115 Bedienungsanleitung

MuxLab

MuxLab 500800 Bedienungsanleitung

MuxLab

MuxLab 500754 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung

ASUSTOR

ASUSTOR AS5004U Bedienungsanleitung