MuxLab 500140 Bedienungsanleitung

P/N: 94-000622-B SE-000604-B

VideoEase™

Active VGA Balun II Family

500140: Active VGA Balun II Kit (Tx & Rx)

500142: Active VGA Balun II, Rx, no PSU

500144: Power Supply for 500142

Installation Guide

e 2

Printed in Canada. No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording, or

otherwise without prior written permission of the author.

Trademarks :

MuxLab and VideoEase are registered trademarks of MuxLab Inc.

e 3

Table of Contents

1. Overview ........................................................................4

1.1. Description........................................................4

1.2. Features.............................................................5

2. Technical Specifications ...............................................6

3. Installation Procedure ..................................................7

3.1. Parts List ...........................................................7

3.2. Product Overview .............................................8

3.3. Pre-Installation Checklist .................................9

3.4. Installation Procedure .....................................10

3.5 Cascadability………………………………..14

4. Troubleshooting ..........................................................15

5. Product Warranty Policy ...........................................17

e 4

Overview

1.1. Description

The Active VGA/Component Balun II Kit allows VGA

or component video to be transmitted via cost-efficient

unshielded copper twisted cable in a point-to-point

configuration.

The product supports remote power pass-thru and is

DDC compliant with all “plug-and-play” laptops, PCs

and displays. The product supports up to 1920 x 1200

pixels and 1080p resolution and features manual gain

adjustment and local monitor output for added

versatility.

The product converts the VGA signal from an

unbalanced signal to a balanced signal and amplifies and

equalizes the signal at the receiving end. It provides

excellent image quality and minimizes distortions due to

smearing, propagation delay and phase deviation. The

transmitter and receiver are shown in the photo below.

Applications include; Digital signage, residential,

boardroom, classroom, and medical imaging video

systems.

e 5

1.2. Features

•Up to 600 ft (180m) via Cat5E/6 @ 1920 x 1200

•Up to 600 ft (180m) via Cat5E/6 @ 1080p

•Remote power pass-thru up to 150 ft (46m)

•DDC1/DDC2 (Plug-and-Play) Compliant

•Manual gain compensation

•Local monitor output

•Up to four (4) transmitters may be cascaded

e 6

Technical Specifications

Environment VGA. VESA VP&D 1.0, VIP ver 2.0. DDC1 and DDC1.

Devices PCs, laptops, CRT monitors, LCD monitors, plasma screens, DLP

projectors.

Transmission Transparent to the user.

Bandwidth Up to 220 MHz (1920 x 1200 resolution), 1080p

Input Impedance HD15; 75 ohms

Output Impedance - Cat5: 100 ohms

Connectors –

Transmitter

VGA/Component Input (PC): DB15HD-F

VGA/Component Output (Local Monitor): DB15HD-F

VGA/Component Output (Cat5): RJ45 shielded

Connectors –

Receiver

VGA/Component Input (Cat5): RJ45 shielded

VGA/Component Output (Display): DB15HD-M

Maximum Distance –

Remote Power

150 ft (46m) (Tx Balun unpowered, Rx balun powered)

150 ft (46m) (Tx Balun powered, Rx balun unpowered)

Max. Distance –

VGA via Cat 5 (or

better) Twisted Pair

640 x 480 (VGA): 1000 ft (305m)

800 x 600 (SVGA): 1000 ft (305m)

1024 x 768 (XGA): 1000 ft (305m)

1280 x 1024 (SXGA): 850 ft (260m)

1600 x 1200 (UXGA): 800 ft (245m)

1366 x 768 (WXGA): 850 ft (260m)

1680x1050 (WSXGA): 850 ft (260m)

1920 x 1200 (WUXGA):600 ft (180m)

Max Distance –

Component Video

(YPbPr) via Cat 5 (or

better) Twisted Pair

480i/p: 1,000 ft (305 m)

1080i: 850 ft (260 m)

1080p: 600 ft (180 m)

* VGA-to-component video cables required (not included)

RJ45 Pin Configuration

Reverse Polarity Sensitive

Use EIA/TIA 568 A or B,

straight-through wiring

Red: Pin 7 (R) Pin 8 (T)

Green: Pin 3 (R) Pin 6 (T)

Blue: Pin 1 (R) Pin 2 (T)

DDC/Remote Power: Pin 4 (R) Pin 5 (T)

Gain Adjustment Gain control via DIP switches on receiver (factory default setting: all OFF)

LED Indicators Tx Balun: Power: One (1) green LED Sync: One (1) green LED

Rx Balun: Power: One (1) green LED

Cable Category 5 or better twisted pair cable.

Transmitter requires additional VGA jumper cables (not included)

Power Supplies 110-240V/12VDC/0.5. Removable AC blades included for North

America and Continental Europe.

12VDC power jacks.

Temperature Operating: 0º to 40º C. Storage:-10º to 70º C.

Humidity: up to 95% non-condensing.

Enclosure Black. ABS fire retardant plastic

Dimensions 4.5” x 3.8” x 1.25” (11.4 cm x 9.7 cm x 3.2cm)

Weight 2 lbs, .9 Kg

Regulatory FCC/CE, RoHS

Warranty Two (2) years

Order Information 500140: Active VGA Balun II Kit

500142: Active VGA Balun II, Receiver Only (Display), No PSU

500144: Power Supply 100-240V/12VDC/.5A for 500142

e 7

Installation Procedure

3.1. Parts List

The Active VGA Balun II Kit (500140) comes with the

following parts. Please verify that all pieces are present

before proceeding.

•Transmitter

•Receiver

•Two (2) External Power Supplies (12 VDC, 0.5A)

•Blades for North America, Continental Europe and

•Installation Guide

The Active VGA Balun Receiver (500142) and Power

Supply (500144) are also sold separately for use with

the VGA Hub (500150).

VGA jumper cables and Category 5e/6 cable are not

included.

e 8

3.2. Product Overview

The external connections and diagnostic indicators of

the Active VGA Balun II are detailed in the following

diagrams. Please familiarize yourself with them before

installing the components.

Figure 1: Transmitter

Figure 2: Receiver

e 9

3.3. Pre-Installation Checklist

There are two (2) components: the transmitter and the

receiver.

1. The transmitter is connected to the video source,

usually a PC, by a VGA jumper cable (not included).

2. A local monitor can be connected to the transmitter

by a VGA jumper cable (not included).

3. The transmitter is connected to the receiver by

Category 5e/6 (or higher) UTP cable (not included).

4. The receiver is connected to the display equipment,

usually a projector or screen, by a VGA jumper

cable (not included) or directly on the equipment.

5. Verify that the desired image resolution is within the

specification of the Active VGA Balun II Kit.

e 10

3.4. Installation Procedure

Verify that the distance between the Active VGA

Balun II transmitter and receiver are within MuxLab

specifications (see Technical Specifications). In order to

install the transmitter, please follow the steps below:

1. Connect the transmitter to the video source with a

VGA jumper cable.

2. (Optional) Connect a local monitor to the transmitter

with a VGA jumper cable.

3. Connect a length of Category 5e/6 (or higher) UTP

cable to the transmitter. Ensure the wiring is

according to EIA 568 A or B. and straight-thru.

4. Connect the 12 VDC power supply first to the

transmitter and then plug the power supply into an

AC power outlet. If power is present, the green

power LED will be ON.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MuxLab Extender Handbücher

MuxLab

MuxLab 500730 Bedienungsanleitung

MuxLab

MuxLab 500417 Bedienungsanleitung

MuxLab

MuxLab 500459-100 Bedienungsanleitung

MuxLab

MuxLab 500759-TX-HLO Bedienungsanleitung

MuxLab

MuxLab 500457 Bedienungsanleitung

MuxLab

MuxLab 500454 Bedienungsanleitung

MuxLab

MuxLab 500462 Bedienungsanleitung

MuxLab

MuxLab 500114 Bedienungsanleitung

MuxLab

MuxLab 500417 Bedienungsanleitung

MuxLab

MuxLab 500402 Bedienungsanleitung

MuxLab

MuxLab 500086 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500402 Bedienungsanleitung

MuxLab

MuxLab 500465 Bedienungsanleitung

MuxLab

MuxLab 500465 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500733 Bedienungsanleitung

MuxLab

MuxLab 500409 Bedienungsanleitung

MuxLab

MuxLab 500710 Bedienungsanleitung

MuxLab

MuxLab 500752 Bedienungsanleitung

MuxLab

MuxLab 500401 Bedienungsanleitung

MuxLab

MuxLab 500401-WP-US Bedienungsanleitung

MuxLab

MuxLab 500450-LR Bedienungsanleitung

MuxLab

MuxLab 500451-PoE Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Bedienungsanleitung