National Instruments 6034E Bedienungsanleitung

DAQ

6034E/6035E

User Manual

Multifunction I/O Boards for

PCI, PXI, and CompactPCI Bus Computers

6034E/6035E User Manual

July 1999 Edition

Part Number 322339A-01

Worldwide Technical Support and Product Information

www.natinst.com

National Instruments Corporate Headquarters

11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100

Worldwide Offices

Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011,

Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, China 0755 3904939, Denmark 45 76 26 00,

Finland 09 725 725 11, France 01 48 14 24 24, Germany 089 741 31 30, Hong Kong 2645 3186,

India 91805275406, Israel 03 6120092, Italy 02 413091, Japan 03 5472 2970, Korea 02 596 7456,

Mexico (D.F.) 5 280 7625, Mexico (Monterrey) 8 357 7695, Netherlands 0348 433466, Norway 32 27 73 00,

Singapore 2265886, Spain (Madrid) 91 640 0085, Spain (Barcelona) 93 582 0251, Sweden 08 587 895 00,

Switzerland 056 200 51 51, Taiwan 02 2377 1200, United Kingdom 01635 523545

For further support information, see the Technical Support Resources appendix. To comment on the

documentation, send e-mail to [email protected].

Important Information

Warranty

The 6034E and 6035E boards are warranted against defects in materials and workmanship for a period of one year from

the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or

replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor.

The media on which you receive National Instruments software are warranted not to fail to execute programming

instructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as evidenced

by receipts or other documentation. National Instruments will, at its option, repair or replace software media that do not

execute programming instructions if National Instruments receives notice of such defects during the warranty period.

National Instruments does not warrant that the operation of the software shall be uninterrupted or error free.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the outside

of the package before any equipment will be accepted for warranty work. National Instruments will pay the shipping costs

of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this document is accurate. The document has been carefully

reviewed for technical accuracy. In the event that technical or typographical errors exist, National Instruments reserves

the right to make changes to subsequent editions of this document without prior notice to holders of this edition. The

reader should consult National Instruments if errors are suspected. In no event shall National Instruments be liable for

any damages arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. CUSTOMER’SRIGHT TO RECOVER DAMAGES CAUSED

BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE

CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS,

OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. This limitation of the liability of

National Instruments will apply regardless of the form of action, whether in contract or tort, including negligence.

Any action against National Instruments must be brought within one year after the cause of action accrues. National

Instruments shall not be liable for any delay in performance due to causes beyond its reasonable control. The warranty

provided herein does not cover damages, defects, malfunctions, or service failures caused by owner’s failure to follow

the National Instruments installation, operation, or maintenance instructions; owner’s modification of the product;

owner’s abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties,

or other events outside reasonable control.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical,

including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without

the prior written consent of National Instruments Corporation.

Trademarks

ComponentWorks™, CVI™, DAQ-STC™, LabVIEW™, Measure™, MITE™, natinst.com™, NI-DAQ™, RTSI™,

SCXI™, and VirtualBench™are trademarks of National Instruments Corporation.

Product and company names mentioned herein are trademarks or trade names of their respective companies.

WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS

National Instruments products are not designed with components and testing for a level of reliability suitable for use in

or in connection with surgical implants or as critical components in any life support systems whose failure to perform

can reasonably be expected to cause significant injury to a human. Applications of National Instruments products

involving medical or clinical treatment can create a potential for death or bodily injury caused by product failure, or by

errors on the part of the user or application designer. Because each end-user system is customized and differs from

National Instruments testing platforms and because a user or application designer may use National Instruments products

in combination with other products in a manner not evaluated or contemplated by National Instruments, the user or

application designer is ultimately responsible for verifying and validating the suitability of National Instruments products

whenever National Instruments products are incorporated in a system or application, including, without limitation,

the appropriate design, process and safety level of such system or application.

©National Instruments Corporation v 6034E/6035E User Manual

Contents

About This Manual

Conventions Used in This Manual.................................................................................xi

Related Documentation..................................................................................................xii

Chapter 1

Introduction

Features of the 6034E and 6035E..................................................................................1-1

Using PXI with CompactPCI.........................................................................................1-2

What You Need to Get Started ......................................................................................1-2

Unpacking......................................................................................................................1-3

Software Programming Choices....................................................................................1-3

National Instruments Application Software....................................................1-3

NI-DAQ Driver Software................................................................................1-4

Optional Equipment.......................................................................................................1-6

Chapter 2

Installation and Configuration

Software Installation......................................................................................................2-1

Hardware Installation.....................................................................................................2-1

Hardware Configuration ................................................................................................2-3

Chapter 3

Hardware Overview

Analog Input ..................................................................................................................3-2

Input Mode ......................................................................................................3-2

Input Range .....................................................................................................3-2

Multichannel Scanning Considerations...........................................................3-3

Analog Output................................................................................................................3-4

Analog Output Glitch......................................................................................3-4

Digital I/O......................................................................................................................3-4

Timing Signal Routing...................................................................................................3-5

Programmable Function Inputs .......................................................................3-6

Device and RTSI Clocks.................................................................................3-6

RTSI Triggers..................................................................................................3-7

Contents

6034E/6035E User Manual vi ©National Instruments Corporation

Chapter 4

Signal Connections

I/O Connector................................................................................................................4-1

Analog Input Signal Overview......................................................................................4-7

Types of Signal Sources..................................................................................4-7

Floating Signal Sources....................................................................4-7

Ground-Referenced Signal Sources.................................................. 4-8

Analog Input Modes........................................................................................4-8

Analog Input Signal Connections..................................................................................4-9

Differential Connection Considerations (DIFF Input Configuration) ............4-11

Differential Connections for Ground-Referenced Signal Sources ...4-12

Differential Connections for Nonreferenced or

Floating Signal Sources.................................................................4-13

Single-Ended Connection Considerations ......................................................4-15

Single-Ended Connections for Floating Signal Sources

(RSE Configuration)......................................................................4-16

Single-Ended Connections for Grounded Signal Sources

(NRSE Configuration)...................................................................4-16

Common-Mode Signal Rejection Considerations...........................................4-17

Analog Output Signal Connections...............................................................................4-18

Digital I/O Signal Connections .....................................................................................4-19

Power Connections........................................................................................................4-20

Timing Connections ......................................................................................................4-20

Programmable Function Input Connections ...................................................4-21

DAQ Timing Connections..............................................................................4-22

SCANCLK Signal ............................................................................4-23

EXTSTROBE* Signal......................................................................4-23

TRIG1 Signal....................................................................................4-23

TRIG2 Signal....................................................................................4-25

STARTSCAN Signal........................................................................4-26

CONVERT* Signal..........................................................................4-27

AIGATE Signal................................................................................4-29

SISOURCE Signal............................................................................4-29

Waveform Generation Timing Connections...................................................4-30

WFTRIG Signal................................................................................4-30

UPDATE* Signal .............................................................................4-31

UISOURCE Signal...........................................................................4-32

General-Purpose Timing Signal Connections.................................................4-33

GPCTR0_SOURCE Signal ..............................................................4-33

GPCTR0_GATE Signal ...................................................................4-34

GPCTR0_OUT Signal......................................................................4-35

GPCTR0_UP_DOWN Signal...........................................................4-35

Contents

©National Instruments Corporation vii 6034E/6035E User Manual

GPCTR1_SOURCE Signal...............................................................4-36

GPCTR1_GATE Signal....................................................................4-37

GPCTR1_OUT Signal ......................................................................4-38

GPCTR1_UP_DOWN Signal...........................................................4-38

FREQ_OUT Signal...........................................................................4-40

Field Wiring Considerations..........................................................................................4-40

Chapter 5

Calibration

Loading Calibration Constants ......................................................................................5-1

Self-Calibration..............................................................................................................5-2

External Calibration.......................................................................................................5-2

Other Considerations .....................................................................................................5-3

Appendix A

Specifications

Appendix B

Custom Cabling and Optional Connectors

Appendix C

Common Questions

Appendix D

Technical Support Resources

Glossary

Index

Figures

Figure 1-1. The Relationship between the Programming Environment,

NI-DAQ, and Your Hardware...............................................................1-5

Figure 3-1. 6034E and 6035E Block Diagram.........................................................3-1

Figure 3-2. CONVERT* Signal Routing.................................................................3-5

Figure 3-3. PCI RTSI Bus Signal Connection .........................................................3-7

Figure 3-4. PXI RTSI Bus Signal Connection.........................................................3-8

Contents

6034E/6035E User Manual viii ©National Instruments Corporation

Figure 4-1. I/O Connector Pin Assignment for the 6034E/6035E...........................4-2

Figure 4-2. Programmable Gain Instrumentation Amplifier (PGIA)......................4-8

Figure 4-3. Summary of Analog Input Connections ...............................................4-10

Figure 4-4. Differential Input Connections for Ground-Referenced Signals .......... 4-12

Figure 4-5. Differential Input Connections for Nonreferenced Signals .................. 4-13

Figure 4-6. Single-Ended Input Connections for Nonreferenced

or Floating Signals................................................................................4-16

Figure 4-7. Single-Ended Input Connections for Ground-Referenced Signals .......4-17

Figure 4-8. Analog Output Connections..................................................................4-18

Figure 4-9. Digital I/O Connections........................................................................4-19

Figure 4-10. Timing I/O Connections .......................................................................4-21

Figure 4-11. Typical Posttriggered Acquisition ........................................................4-22

Figure 4-12. Typical Pretriggered Acquisition..........................................................4-22

Figure 4-13. SCANCLK Signal Timing....................................................................4-23

Figure 4-14. EXTSTROBE* Signal Timing .............................................................4-23

Figure 4-15. TRIG1 Input Signal Timing..................................................................4-24

Figure 4-16. TRIG1 Output Signal Timing...............................................................4-24

Figure 4-17. TRIG2 Input Signal Timing..................................................................4-25

Figure 4-18. TRIG2 Output Signal Timing...............................................................4-26

Figure 4-19. STARTSCAN Input Signal Timing......................................................4-26

Figure 4-20. STARTSCAN Output Signal Timing...................................................4-27

Figure 4-21. CONVERT* Input Signal Timing ........................................................4-28

Figure 4-22. CONVERT* Output Signal Timing......................................................4-28

Figure 4-23. SISOURCE Signal Timing ...................................................................4-30

Figure 4-24. WFTRIG Input Signal Timing..............................................................4-31

Figure 4-25. WFTRIG Output Signal Timing...........................................................4-31

Figure 4-26. UPDATE* Input Signal Timing ...........................................................4-32

Figure 4-27. UPDATE* Output Signal Timing.........................................................4-32

Figure 4-28. UISOURCE Signal Timing...................................................................4-33

Figure 4-29. GPCTR0_SOURCE Signal Timing......................................................4-34

Figure 4-30. GPCTR0_GATE Signal Timing in Edge-Detection Mode ..................4-35

Figure 4-31. GPCTR0_OUT Signal Timing .............................................................4-35

Figure 4-32. GPCTR1_SOURCE Signal Timing......................................................4-36

Figure 4-33. GPCTR1_GATE Signal Timing in Edge-Detection Mode ..................4-37

Figure 4-34. GPCTR1_OUT Signal Timing .............................................................4-38

Figure 4-35. GPCTR Timing Summary ....................................................................4-39

Figure B-1. 68-Pin E Series Connector Pin Assignments........................................B-2

Figure B-2. 50-Pin E Series Connector Pin Assignments........................................B-3

Contents

©National Instruments Corporation ix 6034E/6035E User Manual

Tables

Table 3-1. Available Input Configurations.............................................................3-2

Table 3-2. Measurement Precision .........................................................................3-3

Table 3-3. Pins Used by PXI E Series Device........................................................3-8

Table 4-1. I/O Connector Signal Descriptions........................................................4-3

Table 4-2. I/O Signal Summary..............................................................................4-6

About This Manual

The 6034 and 6035 E Series devices are high-performance multifunction

analog, digital, and timing I/O devices for PCI, PXI, and CompactPCI bus

computers. Supported functions include analog input, analog output,

digital I/O, and timing I/O.

This manual describes the electrical and mechanical aspects of the

PCI-6034E, PCI-6035E, and PXI-6035E devices from the E Series product

lineand containsinformation concerningtheiroperationandprogramming.

Conventions Used in This Manual

The following conventions are used in this manual:

<> Angle brackets containing numbers separated by an ellipsis represent a

range of values associated with a bit or signal name—for example,

DBIO<3..0>.

♦The ♦symbol indicates that the text following it applies only to a specific

product, a specific operating system, or a specific software version.

This icon denotes a note, which alerts you to important information.

This icon to the left of bold italicized text denotes a caution, which advises

you of precautions to take to avoid injury, data loss, or a system crash.

bold Bold text denotes items that you must select or click on in the software,

such as menu items and dialog box options. Bold text also denotes

parameter names.

italic Italic text denotes variables, emphasis, a cross reference, or an introduction

to a key concept. Thisfont also denotes text that is a placeholder for a word

or value that you must supply.

monospace Text in this font denotes text or characters that you should enter from the

keyboard, sections of code, programming examples, and syntax examples.

This font is also used for the proper names of disk drives, paths, directories,

programs, subprograms, subroutines, device names, functions, operations,

variables, filenames and extensions, and code excerpts.

CompactPCI Refers to the core specification defined by the PCI Industrial Computer

Manufacturer’s Group (PICMG)

About This Manual

6034E/6035E User Manual xii www.natinst.com

NI-DAQ Refers to the NI-DAQ driver software for PC compatible computers unless

otherwise noted.

PC Refers to all PC AT series computers with PCI or PXI bus unless otherwise

noted.

PXI StandsforPCIeXtensions forInstrumentation. PXIisanopenspecification

that builds off the CompactPCI specification by adding

instrumentation-specific features.

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung