Neilsen CT0527 Bedienungsanleitung

ENGINE TIMING TOOLS FOR VAG 1.2 TSI / TFSI

CT0527

INSTRUCTION MANUAL

GENERAL

For adjusting the timing during replacement of the timing chain, renewing of the

cylinder head gasket, etc.

Applications:

Audi models A1 and A3

VW New Beetle, Caddy, Golf, Jetta, Polo, Touran

Skoda Fabia, Fabia Combi, Wildwasser,

Oktavia,Roomster, Yeti

Seat Altea, Ibiza, Leon, Toledo

Engine codes: CBZA, CBZB, CBZC

CONTENTS

1. Camshaft Setting Tool,

to be used as OEM T10414

2. Guide Pins,

to be used as OEM T10341

3.Crankshaft Locking Bolt,

to be used as OEM T10340

SAFETY INSTRUCTIONS

• Do not use the tool if parts are missing or damaged.

• Use the tool for the intended purpose only.

• Never place the tool on the vehicle battery. There is a risk of a short circuit.

• Be careful when working with the engine running. Loose clothing, tools and

other objects can be caught by rotating parts and cause serious injury.

• Keep children and other unauthorized persons away from the work area.

• Do not allow children to play with the tool or its packaging.

• Be careful when working on hot engines because of the risk of burn injuries.

• If you remove the ignition key before repairing, you can prevent the engine from

being started accidentally and resulting in engine damage.

• This manual serves as a brief guide and does not replace a workshop manual.

Always refer to the vehicle-specific service literature, particularly the technical

data such as torque values and instructions for disassembly/assembly, etc.

• After repair or before starting the engine, turn a minimum of 2 turns by hand and

check the timing again.

• Turn the engine only in the normal direction of rotation (clockwise unless

otherwise specified).

• Do not use locking tools for camshaft and crankshaft as a counter-holder,

during loosening or tightening screws on pulleys, camshafts or crankshafts. This

can damage tools and engine components. Only use tools that are suitable for

this purpose.

INSTRUCTIONS FOR USE

Camshaft Setting Tool (1),

to be used as OEM T10414

•Align the camshaft slot by turning the

camshaft.

• Insert the tool and fix it with the screw.

Guide Pins (2),

to be used as OEM T10341

On compressor models, use the guide

pins instead of the mounting screws (A)

to guide the compressor up and down.

Crankshaft Locking Bolt (3),

to be used as OEM T10340

• Insert the crankshaft fixing bolt into the opening provided.

Note: The crankshaft fixing bolt only fixes the crankshaft in normal direction of

motor rotation. The end of the crankshaft fixing bolt must be specially designed

for this touch the intended surface on the crankshaft.

• If the crankshaft fixing bolt cannot be fully inserted, this means that the

crankshaft is not in the correct position.

• Remove the crankshaft fixing bolt and turn the crankshaft approx. 90 ° in the

normal direction of rotation of the engine keep turning.

• Insert the crankshaft fixing bolt up to the stop.

• Continue turning the crankshaft in the direction of engine rotation until it rests

against the crankshaft fixing bolt.

• Tighten the crankshaft fixing bolt to 30 Nm.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

www.cannontools.co.uk

Inhaltsverzeichnis

Andere Neilsen Werkzeuge Handbücher

Neilsen

Neilsen CT5271 Bedienungsanleitung

Neilsen

Neilsen CT4794 Bedienungsanleitung

Neilsen

Neilsen CT1056 Bedienungsanleitung

Neilsen

Neilsen CT2737 Bedienungsanleitung

Neilsen

Neilsen CT2247 Bedienungsanleitung

Neilsen

Neilsen CT5202 Bedienungsanleitung

Neilsen

Neilsen CT4342 Bedienungsanleitung

Neilsen

Neilsen CT4694 Bedienungsanleitung

Neilsen

Neilsen CT1533 Bedienungsanleitung

Neilsen

Neilsen CT4790 Bedienungsanleitung

Neilsen

Neilsen NAH-A30B Bedienungsanleitung

Neilsen

Neilsen CT4188 Bedienungsanleitung

Neilsen

Neilsen CT3073 Bedienungsanleitung

Neilsen

Neilsen CT1057 Bedienungsanleitung

Neilsen

Neilsen CT2102 Bedienungsanleitung

Neilsen

Neilsen CT2266 Bedienungsanleitung

Neilsen

Neilsen CT3583 Bedienungsanleitung

Neilsen

Neilsen CT4852 Bedienungsanleitung

Neilsen

Neilsen CT0676 Bedienungsanleitung

Neilsen

Neilsen CT1535 Bedienungsanleitung

Neilsen

Neilsen CT4448 Betriebsanleitung

Neilsen

Neilsen CT5823 Bedienungsanleitung

Neilsen

Neilsen CT0933 Bedienungsanleitung

Neilsen

Neilsen CT1509 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung