Neilsen CT4448 Betriebsanleitung

DENT TOOL KIT CT4448

ORIGINAL INSTRUCTION

Read the operating manual thoroughly before work and keep it

for future reference.

Cannon Tools Limited

Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

INCLUDES:

1pc glue gun(220-240V~, 50Hz, 40W)

1pc sliding hammer to pull out hard dents

1pc dent lifter (Baby face mini lifter or normal mini lifter) for slight dents on flat surface

1pc glue remover

1pc scraper for gentle removal of dent pads

8pcs black glue sticks (11 x 200mm) with very good performance for best results

19pcs glue tabs in various sizes and shapes

OPERATION AND USE OF ARTICLE

Step1:

The first position in the vehicle collision / dent. Clean the surface of the process. Use only mild

cleaning agents.The use of surface coarse sponge, will cause irreparable damage.

Step2:

Use the glue gun, push the glue stick into the back of the glue gun . Heating the glue gun and

the glue stick melt.

Step3:

Use hot glue gun, put glue on the glue tab, and then place the recess in the dent glue tab.

Step4:

use the T bar slide hammer or dent mini lifter extraction of the bump.what tool you use, also

depends on the size of the dent, up to 30mm diameter is the dent mini lifter,Other use the slide

hammer.

Step5:

When the temperature reaches the right time, do not be too hard. Then pull until the glue tab is

removed.

Step6:

Use the release agent , dissolve glue. Use of the scraper, remove the glue.

Step7:

Finally, use a soft clean cloth wipe again residual glue, make the body to restore new look.

ELECTRICAL INFORMATION

Warning

Mains plug replacement (UK & Ireland only)

If you need to replace the fitted plug of the tool, then follow the instructions below.

Machines that are connected direct to mains supply.

For machines that are double insulated, do not require a connection to earth.

If in doubt consult a qualified electrician

The wires are coloured as follows

Blue Neutral (N)

Brown Live (L)

3amp BS 1363A Fuse

Always secure the wires in the plug terminals carefully make sure no loose strands are left

exposed as they can short circuit and cause injury, fire and or damaged the tool.

Secure the cable in the cord grip firmly.

Never use a light socket. Never connect the live (L) or neutral (N) wires to the earth pin marked

(E).

NOTE: If your mains wires differ from the above consult a qualified electrician. Always make

sure the mains supply is of correct voltage and you use the correct fuse protection.

Regularly inspect all machines electrical connection and wiring condition for damage. Any

faults detected should be immediately rectified before further use of the machine. Always have

the wiring checked by a qualified electrician.

In use ensure all wiring and extension cords are kept clear of any cutting tools, sharp objects

and any other workshop hazards such as wet floors, chemicals, solvents etc.

This machine is protected by a 3 amp fuse make sure the correct fuse is used.

To prevent fire or shock hazards do not expose these products to rain or moisture.

CANNON TOOLS LTD

Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.

Made in China

Inhaltsverzeichnis

Andere Neilsen Werkzeuge Handbücher

Neilsen

Neilsen CT1057 Bedienungsanleitung

Neilsen

Neilsen CT1056 Bedienungsanleitung

Neilsen

Neilsen CT0676 Bedienungsanleitung

Neilsen

Neilsen VAG CT5467 Bedienungsanleitung

Neilsen

Neilsen CT1533 Bedienungsanleitung

Neilsen

Neilsen CT2102 Bedienungsanleitung

Neilsen

Neilsen CT4793 Bedienungsanleitung

Neilsen

Neilsen CT1509 Bedienungsanleitung

Neilsen

Neilsen CT0729 Betriebsanleitung

Neilsen

Neilsen CT5202 Bedienungsanleitung

Neilsen

Neilsen CT4852 Bedienungsanleitung

Neilsen

Neilsen CT2247 Bedienungsanleitung

Neilsen

Neilsen CT2737 Bedienungsanleitung

Neilsen

Neilsen CT0933 Bedienungsanleitung

Neilsen

Neilsen CT4794 Bedienungsanleitung

Neilsen

Neilsen CT3583 Bedienungsanleitung

Neilsen

Neilsen CT4342 Bedienungsanleitung

Neilsen

Neilsen CT5823 Bedienungsanleitung

Neilsen

Neilsen NAH-A30B Bedienungsanleitung

Neilsen

Neilsen CT4694 Bedienungsanleitung

Neilsen

Neilsen CT0527 Bedienungsanleitung

Neilsen

Neilsen CT1535 Bedienungsanleitung

Neilsen

Neilsen CT4621 Bedienungsanleitung

Neilsen

Neilsen OPEL VAUXHALL CT2909 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung