NETGEAR DG834GVSP Benutzerhandbuch

February 2006

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

Setup Manual for the

DG834GVSP Integrated

ADSL Modem and

Wireless Router with

Voice

v1.0, February 2006

Trademarks

NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of

Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective

holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Regulatory Approvals

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate this equipment.

(Example - use only shielded interface cables when connecting to computer or peripheral

devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

The antennas used for this transmitter must be installed to provide a separation distance of at

least 20 cm from all persons and must not be co-located or operating in conjunction with any

other antenna or transmitter.

Channel

The Wireless Channel sets the radio frequency used for communication.

•Access Points use a fixed Channel. You can select the Channel used. This allows you to

choose a Channel which provides the least interference and best performance. In the USA

and Canada, 11 channel are available. If using multiple Access Points, it is better if adjacent

Access Points use different Channels to reduce interference.

• In "Infrastructure" mode, Wireless Stations normally scan all Channels, looking for an

Access Point. If more than one Access Point can be used, the one with the strongest

signal is used. (This can only happen within an ESS.)

• If using "Ad-hoc" mode (no Access Point), all Wireless stations should be set to use the

same Channel. However, most Wireless stations will still scan all Channels to see if there

is an existing "Ad-hoc" group they can join.

Note:This equipment marketed in USA is restricted by firmware to only operate on 2.4G channel 1-11

v1.0, February 2006

Contents

Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless

Router with Voice

Chapter 1

Connecting the Router to the Internet

What’s in the Box? ..........................................................................................................1-1

The Router’s Front Panel .........................................................................................1-2

The Router’s Rear Panel .........................................................................................1-3

What You Need Before You Begin ..................................................................................1-4

Internet Configuration Requirements .......................................................................1-4

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup ......................................1-4

Smart Wizard Setup .......................................................................................................1-5

Manual Setup .................................................................................................................1-6

Understanding ADSL Microfilters .............................................................................1-6

Computers Set to DHCP ..........................................................................................1-7

Manually Setting Up Your ADSL Modem Wireless Router .............................................1-7

How to Manually Set Up and Test Basic Wireless Connectivity ...................................1-13

Implement Appropriate Wireless Security ....................................................................1-14

Chapter 2

Troubleshooting

Basic Functioning ...........................................................................................................2-1

Power LED Not On ...................................................................................................2-2

Test LED Never Turns On or Test LED Stays On .....................................................2-2

LAN or ADSL Internet Port LEDs Not On .................................................................2-3

Troubleshooting the Web Configuration Interface ..........................................................2-3

Troubleshooting the ISP Connection ..............................................................................2-4

ADSL link .................................................................................................................2-4

Obtaining an Internet IP Address .............................................................................2-5

Troubleshooting PPPoE or PPPoA ..........................................................................2-6

v1.0, February 2006

Troubleshooting Internet Browsing ..........................................................................2-7

Troubleshooting a TCP/IP Network Using the Ping Utility ..............................................2-7

Testing the LAN Path to Your Router .......................................................................2-7

Testing the Path from Your Computer to a Remote Device .....................................2-8

Restoring the Default Configuration and Password ........................................................2-9

Using the Reset Button ............................................................................................2-9

Appendix A

Technical Specifications

Appendix B

Related Documents

Connecting the Router to the Internet 1-1

v1.0, February 2006

Chapter 1

Connecting the Router to the Internet

This chapter describes how to set up the router on your Local Area Network (LAN) and connect to

the Internet. It describes how to set up your ADSL modem wireless router for Internet access and

configure basic wireless connectivity.

What’s in the Box?

The product package should contain the following items:

• ADSL Modem Wireless Router

• AC power adapter (varies by region)

• Category 5 (Cat 5) Ethernet cable

• Telephone cable with RJ-11 connector

• Microfilters (quantity and type vary by region)

•Resource CD, including:

— The Smart Wizard Installation Assistant

— This manual

• Warranty and Support Information cards

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the

carton, including the original packing materials, in case you need to return the product for repair.

Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice

1-2 Connecting the Router to the Internet

v1.0, February 2006

The ADSL Modem Wireless Router’s Front Panel

The ADSL modem wireless router front panel shown below contains status LEDs.

You can use the LEDs to verify various conditions. Table 1-1 describes each LED.

Figure 1-1

Table 1-1. LED Descriptions

Label Activity Description

1. Power On (Green)

On (Red)

Off

Power is supplied to the router.

Power-on Self-test failure or device malfunction.

Power is not supplied to the router.

2. Test On (Amber)

Blink (Amber)

Off

System is not ready or failed to start up.

The system is initializing.

The system is ready and running.

3. ADSL On (Green)

Blink (Green)

Off

ADSL is synchronized.

DSL is attempting to synchronize.

No link is detected on this port or modem is not powered on.

4. Internet

On (Green)

Flicker (Green)

Red

Off

Internet port is connected, has an IP address, DSL is up, no traffic detected.

Traffic is passing through the connected internet port in either direction.

Device attempted to connect, but failed.

Modem powered off or in bridged mode, or ADSL connection not present.

12 345 6 7

Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice

Connecting the Router to the Internet 1-3

v1.0, February 2006

The ADSL Modem Wireless Router’s Rear Panel

The rear panel of the ADSL modem wireless router contains port connections.

Viewed from left to right, the rear panel contains the following elements:

1. RJ-11 ADSL port for connecting the router to a telephone wall jack via the ADSL port of a

phone splitter

2. RJ-11 PSTN port for connecting the router to the telephone wall jack via the phone port of a

phone splitter

5. Wireless On (Green)

Blink (Green)

Off

Wireless port is linked.

Data is being transmitted or received.

No wireless link.

6. Phone1

Phone2

On (Green)

Fast blink

Slow blink

Off

Registered to SIP server.

Talking.

Off hook.

Phone not ready.

7. FXO/

PSTN

fallback

On (Green)

Blink

Off

PSTN line detected.

Talking.

No PSTN line detected.

Figure 1-2

Table 1-1. LED Descriptions (continued)

Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice

1-4 Connecting the Router to the Internet

v1.0, February 2006

3. Two phone ports for connecting to telephones

4. Four Local Ethernet RJ-45 LAN ports for connecting the router to the local computers

5. Factory Default Reset push button

6. AC power adapter outlet

7. Wireless antenna

Each LAN port has two LEDs, one green and one amber. They indicate the port status as follows:

• On (Green) LAN port is linked to a 100Mbps device

• Blink (Green) Data is being transmitted or received at 100 Mbps

• On (Amber) LAN port is linked to a 10Mbps device

• Blink (Amber) Data is being transmitted or received at 10 Mbps

• Off No link is detected on this port

Setup Manual for the DG834GVSP Integrated ADSL Modem and Wireless Router with Voice

Connecting the Router to the Internet 1-5

v1.0, February 2006

What You Need Before You Begin

You need to prepare the following before you can set up your router:

• Active Internet service provided by an ADSL account.

• The Internet Service Provider (ISP) configuration information for your ADSL account.

• ASDL microfilters as explained below.

• Your computers set to DHCP.

Internet Configuration Requirements

Depending on how your ISP set up your Internet account, you need one or more of these

configuration parameters to connect your router to the Internet:

• Virtual Path Identifier (VPI)/Virtual Channel Indentifier (VCI) parameters

• Multiplexing Method

• Host and Domain Names

• ISP Login Name and Password

• ISP Domain Name Server (DNS) Addresses

• Fixed or Static IP Address

Your ISP should have provided you with all the information needed to connect to the Internet. If

you cannot locate this information, you can ask your ISP to provide it.

Two Setup Methods: 1) Smart Wizard Setup 2) Manual Setup

You have two methods available for setting up your ADSL modem wireless router:

•Smart Wizard Setup: Use the Smart Wizard on the CD to assist you with setting up your

ADSL modem wireless router.

— This option is the easiest. The Smart Wizard on the CD guides you through the setup

process, automating many of the steps, and verifying that necessary conditions exist and

that steps you perform have been successfully completed.

— This option requires a PC running Microsoft Windows 98SE or higher.

Inhaltsverzeichnis

Andere NETGEAR Modem Handbücher

NETGEAR

NETGEAR DG834N Bedienungsanleitung

NETGEAR

NETGEAR D6220 Bedienungsanleitung

NETGEAR

NETGEAR CM500 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk CM2050V Bedienungsanleitung

NETGEAR

NETGEAR LB2120 Series Bedienungsanleitung

NETGEAR

NETGEAR 7550 Bedienungsanleitung

NETGEAR

NETGEAR GS908E Bedienungsanleitung

NETGEAR

NETGEAR CG3000 Produktinformationsblatt

NETGEAR

NETGEAR DM111P - ADSL2+ Ethernet Modem Bedienungsanleitung

NETGEAR

NETGEAR DM602 - ADSL-Modem - 8 Mbps DSL Modem Bedienungsanleitung

NETGEAR

NETGEAR CM1150V Bedienungsanleitung

NETGEAR

NETGEAR CG814M Bedienungsanleitung

NETGEAR

NETGEAR CM600 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk CM1200 Bedienungsanleitung

NETGEAR

NETGEAR CM1000v2 Bedienungsanleitung

NETGEAR

NETGEAR orbi CBK40 Bedienungsanleitung

NETGEAR

NETGEAR CM1150V Bedienungsanleitung

NETGEAR

NETGEAR DM200 Bedienungsanleitung

NETGEAR

NETGEAR CM1000v2 Bedienungsanleitung

NETGEAR

NETGEAR CM700 Bedienungsanleitung

NETGEAR

NETGEAR C6250 Bedienungsanleitung

NETGEAR

NETGEAR CM700 Bedienungsanleitung

NETGEAR

NETGEAR CM212 Bedienungsanleitung

NETGEAR

NETGEAR CM1000 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung