Netvox R72616A Bedienungsanleitung

Model: R72616A

Wireless PM2.5/Temperature/Humidity Sensor

Wireless PM2.5 /

Temperature / Humidity Sensor

R72616A

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained

in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction ..................................................................... 2

2. Appearance ...................................................................... 3

3. Main Feature.................................................................... 4

4. Set up Instruction............................................................. 4

5. Data Report...................................................................... 6

6. Installation ....................................................................... 8

7. Information about Battery Passivation........................... 10

8. Important Maintenance Instruction................................ 11

1.Introduction

R72616A is a ClassA type device based on the LoRaWANTM protocol of Netvox and is compatible with the LoRaWAN protocol.

R72616A can connect with the detector of PM2.5, temperature, and humidity, and report the collected values to the corresponding

gateway.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

Battery Pack

2. Appearance

Temperature and Humidity Sensor

PM2.5 Sensor

Indicator

Function Key

DC in

Batteries (ER14505x8 pcs)

3. Main Feature

PM2.5, temperature, and humidity detection

Adopt SX1276 wireless communication module

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum technology

Configuration parameters can be configured through third-party software platforms, data can be read and alarms can be set via

SMS text and email (optional)

Applicable to the third-party platforms: Actility/ ThingPark, TTN, MyDevices/Cayenne

Low power consumption and long battery life

Note:

Battery life is determined by the sensor reporting frequency and other variables, please refer to

http://www.netvox.com.tw/electric/electric_calc.html

On this website, users can find battery life of various models in different configurations.

4. Set up Instruction

On/Off

Power On Connect to the battery pack

Turn On Connect to the battery pack to turn on directly

Restore to Factory Setting Press and hold the function key for 5 seconds, and the green indicator flashes 20 times

Power Off Remove the batteries

Note

1. The engineering test requires to write the engineering testing software separately.

2. The interval between on and off is suggested to be about 10 seconds to avoid the

interference of capacitor inductance and other energy storage components.

Network Joining

Never Join the Network

Turn on the device to search the network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail

Had joined the network

(Not in the original setting)

Turn on the device to search the previous network.

The green indicator keeps on for 5 seconds: success.

The green indicator remains off: fail.

Fail to Join the Network Suggest checking the device registration information on the gateway or consulting your

platform server provider if the device fails to join the network.

Function Key

Press and Hold for 5 Seconds

Restore to the original setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once

The device is in the network: the green indicator flashes once and the device sends a data

report

The device is not in the network: the green indicator remains off

Low Voltage Threshold

Low Voltage Threshold 6.8 V

Threshold Restore to Factory Setting

Description

R72616A has the function of the power-down saving the memory

of network-joining information. This function acquiesces in turn off, that is, it will

rejoin every time when it is power on. If the device is turned on by the

ResumeNetOnOff command, the last network-joining information will be recorded

when every time it is power on. (including saving the network address information

that it is assigned, etc.) If users want to join a new network, the device needs to

perform the original setting, and it will not rejoin the last network.

Operation Method

1. Press and hold the binding button for 5 seconds and then release

(release the binding button when the LED flashes), and the LED flashes 20 times.

2. The device automatically restarts to rejoin the network.

5. Data Report

After power on, the device will immediately send a version packet report and the data report including the temperature,

humidity, PM2.5 and voltage.

The device sends data according to the default configuration before any other configuring.

ReportMaxTime: 140mins

* The ReportMaxTime should be greater than ReportType count *ReportMinTime+10

ReportMinTime: 30s (US915,AU915, KR920, AS923, IN865)

120s (EU868)

ReportType count = 1

Note:

(1) The cycle of the device sending the data report is according to the default.

(2) The interval between two reports must be the MaxTime.

(3) ReportChange is not supported by R72616A (Invalid configuration). The data report is sent

according to ReportMaxTime as a cycle. (The first data report is the start to the end of a cycle.)

(4) Data pocket: PM2.5, temperature, and humidity.

(5) The device also supports the TxPeriod cycle configuration instructions of Cayenne. Therefore, the device can

perform the report according to the TxPeriod cycle. The particular report cycle is ReportMaxTime or TxPeriod

depending on which report cycle was configured last time.

(6) It would take 45 seconds for the sensor to sample and process the collected value after pressing the button,

please be patient.

The device reported data parsing please refer to Netvox LoraWAN Application Command document and Netvox Lora

Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index

Report Configuration

（1）Configure R72616A device parameters MinTime = 30s, MaxTime = 3600s (3600> 30 * 2 + 10)

Downlink: 016A001E0E100000000000

Device Return:

816A000000000000000000 (configuration success)

816A010000000000000000 (configuration failure)

Note:

1. The ReportMaxTime should be greater than (ReportType count *ReportMinTime+10; Unit: second).

2. The Report data of R72616A is temperature, humidity, and PM2.5. ReportType count = 1

3. The MinTime setting of EU868 cannot be less than 120s, and the MaxTime cannot be less than 370s.

（2）Read R72616A device parameter

Downlink: 026A000000000000000000

Device Return:

826A001E0E100000000000 (device current parameter)

Description Device CmdI

D DeviceType NetvoxPayLoadData

Config

ReportReq

R72616A

0x01

0x6A

MinTime

(2bytes Unit:s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

Config

ReportRsp 0x81 Status

(0x00_success)

Reserved

(8Bytes, Fixed 0x00)

ReadConfig

ReportReq 0x02 Reserved

(9Bytes, Fixed 0x00)

ReadConfig

ReportRsp 0x82 MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

Reserved

(5Bytes, Fixed 0x00)

6.Installation

This product does not have a waterproof function.After the network joining is completed, please place it indoor.

(1) Environmental sensor - temperature and humidity _PM2.5 (R72616A) and battery box are fixed by screws at the factory for

transportation reasons. Before installation, the screws need to be unscrewed (red circle below).

(2) Environmental sensor - temperature and humidity _PM2.5 (R72616A) battery box with built-in lithium battery, users need to

unscrew the four corners of the battery box. Insert 8 ER14505 3.6V batteries into the battery compartment, 4 sections on the

front and 4 sections on the back side. After loading the battery, install the battery PCB board face up and attach it to the top

cover of the case. As shown in Figure 1.

Note:

The direction of the battery is divided into positive (+) and negative (-) according to the adhesion mark in the battery slot to

prevent the positive and negative electrodes from being reversed.

The top cover battery PCB board has a component on the front side, and the front side faces the lower cover, which cannot be

reversed, otherwise the lower cover of the outer casing cannot be closed.

Figure 1. Battery PCB front Figure 2. The reverse side of the battery PCB

(3) The environmental sensor body and the battery case are fixed by screws (purchased by users), and the battery case and the

device are respectively fixed to the surface of the wall or other objects (as shown in the following figure).

Note: Do not install the device in a metal shielded box or in an environment with other electrical equipment around it to avoid

affecting the wireless transmission of the device.

(4) When the ambient sensor - temperature and humidity _PM2.5 (R72616A) regularly reports data according to Max Time -

temperature, humidity and PM2.5 concentration value, the default Max Time are 180 seconds.

Note: Max Time can be modified by the downlink command, but it is not recommended to set this time too small to avoid

excessive battery drain.

(5) Environmental Sensor - Temperature and Humidity _PM2.5 (R72616A) is suitable for the following scenarios:

Construction site

Environmental monitoring

Screws

Fixed

Screws

Fixed

Screws

Fixed

Screws

Fixed

Battery Case

Environmental sensor_

Temperature and Humidity

_PM2.5 R72616A

Andere Handbücher für R72616A

Inhaltsverzeichnis

Andere netvox Zubehör Handbücher

netvox

netvox R718EB Bedienungsanleitung

netvox

netvox R311CB Bedienungsanleitung

netvox

netvox R727 Bedienungsanleitung

netvox

netvox R311CA Bedienungsanleitung

netvox

netvox R718LB Bedienungsanleitung

netvox

netvox R718N3 Bedienungsanleitung

netvox

netvox R718PQ Bedienungsanleitung

netvox

netvox R718PA11 Bedienungsanleitung

netvox

netvox R315 Series Bedienungsanleitung

netvox

netvox R720FLD Bedienungsanleitung

netvox

netvox R311A Bedienungsanleitung

netvox

netvox RA0708 Bedienungsanleitung

netvox

netvox R809A Bedienungsanleitung

netvox

netvox ZigBee ZB11B Bedienungsanleitung

netvox

netvox R718G Bedienungsanleitung

netvox

netvox R718DA Bedienungsanleitung

netvox

netvox R311D Bedienungsanleitung

netvox

netvox R718VA Bedienungsanleitung

netvox

netvox R311D Bedienungsanleitung

netvox

netvox R718B1 Series Bedienungsanleitung

netvox

netvox R718PA7 Bedienungsanleitung

netvox

netvox R718AD Bedienungsanleitung

netvox

netvox R718N1 Bedienungsanleitung

netvox

netvox R72615 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

netvox R72616A Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken