Nilfisk-Advance E130.3 X-TRA Betriebsanleitung

Repair Manual

E130.3 & E130.3 X-TRA

E140.3 X-TRA & E145.3 X-TRA

Index

A. Safety Precautions 3

B. Technical data 4

C. Structure 5-7

D. Service / Repair 8-24

E. Tools 25

F. Function 26-27

G. Electric diagrams 28-29

Safety Precautions

Warning!

 Inhalation of aerosols can be hazardous to health. Where applicable use a device in order to

avoid or reduce aerosols production, e.g., a shield covering the nozzle. For protection against

aerosols use a respiratory mask of class FFP 2 or higher.

 Always unplug the power plug before cleaning or maintenance and when replacing parts or

converting the machine to another function.

 Observe the national safety regulations issued, for example, by the employers liability insur-

ance association, social security institutions, occupational safety and health authorities or oth-

er organizations.

 Hold the spray lance firmly with both hands. The spray lance is affected by a thrust of up to

16,4N during operation.

 The operator and anyone in the immediate vicinity of the site of cleaning should take action to

protect themselves from being struck by debris dislodged during operation. Wear goggles dur-

ing operation.

 Disconnect from electrical power supply before carrying out user maintenance.

 To ensure the appliance safety only use original spare parts from the manufacturer or ap-

proved by the manufacturer.

 High pressure hoses, fittings and couplings are important for the safety of the appliance. Only

use hoses, fittings and couplings recommended by the manufacturer.

 Do not use the appliance if a supply cord or important parts of appliance are damaged, e.g.

safety device, high pressure hose and trigger gun.

 The appliance is only intended for cleaning outdoors.

 Appropriate ear protection must be used.

 Never use the machine in an environment where there could be a danger of explosion. If any

doubt arises, please contact the local authorities.

 It is not allowed to clean asbestos containing surfaces with high pressure.

 This high pressure washer must not be used at temperatures below 0°C.

 Voltage and frequency of the machine (see rating plate) must match the voltage of and fre-

quency of the mains supply.

 Only connect the machine to electrical installation made by a certifi ed electrician and com ply

with IEC 60364-1.

 It is recommended that the electrical supply to the machine should include a residual current

device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms.

Technical Data.

Product segment: Consumer

E130.3

E130.3 X-TRA E140.3 X-TRA E145.3 X-TRA

Max pressure bar 130 140 145

Voltage V230 230 230

Frequency Hz 50 50 50

Rated current A99,5 10

Power consumption kW 22,1 2,1

Motor speed min-12800 2800 2800

Flow rate, HP l / min. 7,5 76,7

Pump pressure bar 113 ±9 122 ±9 126 ±9

Nozzle pressure bar 106 ±9 115 ±9 119 ±9

Standby pressure bar 15-35 15-35 15-35

Retaining time min. 555

Oil contents ml 60 60 60

Oil type LHM32 LHM32 LHM32

Max inlet water temperature °C 60 60 60

Max inlet water pressure bar 10 10 10

High pressure hose length m8-10m 9-10m 9-10m

Suction height m111

Supply cable length m5m 5m 5m

Insulation class (Motor) FFF

Ingress protection class IPX5 IPX5 IPX5

Structure.

Cabinet parts overview.

Max. Torque for plastic screws: 2,0 Nm

Structure.

Hose reel overview.

Structure.

Motor / pump unit overview including assembly torque

and glue specification.

4 Nm + Loc-tite 245

16 Nm

6 Nm

16 Nm

4 Nm + Loc-tite 245

Service / Repair.

Dismounting / mounting of front cabinet.

1. Remove the 2 TORX 20 screws from the bottom side, then remove the feet. (Fig 1)

2. Remove the styling cover by hand. (Fig 2)

Note: The 2 hooks in the top of the cabinet must be in correct position. (Fig 3)

Fig. 1

Fig. 2 Fig. 3

Service / Repair.

Disassembly / assembly of pump cover.

1. Remove 1 TORX 20 screw (Fig 4)

2. Remove the MPU floating cover. (Fig 4)

3. Make sure that the foam and the air barrier is placed correct when mounting. (Fig 5)

Fig. 4

Fig. 5

Fig. 7

Service / Repair.

Disassembly / assembly of start / stop system.

1. The micro-switch box can now be removed by hand, so that there is free access to the

start / stop valve (Fig. 6)

2. The start / stop valve can be removed with a 25 mm spanner.

Check that all parts are correct placed before mounting. (Fig. 7)

Mounting torque: see page 7.

Fig. 6

Andere Handbücher für E130.3 X-TRA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nilfisk-Advance Hochdruckreiniger Handbücher

Nilfisk-Advance

Nilfisk-Advance E 145 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Excellent 160 Betriebsanleitung

Nilfisk-Advance

Nilfisk-Advance Core 125 Betriebsanleitung

Nilfisk-Advance

Nilfisk-Advance MC DE Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SelectSpray 1500EH Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance C 100.7 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance C 120.4 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Gerni 2302A Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance MH 5M E Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance C 125.4 Betriebsanleitung

Nilfisk-Advance

Nilfisk-Advance MH 5M E Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Hybrid 7 MH42 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Core 150 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SelectSpray 1500E 56011781 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance MC 4M Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance N/G-411A Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance D 130.4 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance C-PG 135.1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance APC 328 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance VL500 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance MC 2C Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance MC 5M Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Nilfisk C 120.3 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance NEPTUNE 4 FA Bedienungsanleitung

Beliebte Hochdruckreiniger Handbücher anderer Marken

Shark

Shark RG-232637 Bedienungsanleitung

Shakti Technology

Shakti Technology S3 Bedienungsanleitung

Kärcher

Kärcher K 4 Pure Bedienungsanleitung

Porter-Cable

Porter-Cable D25806-025-2 Bedienungsanleitung

REM POWER

REM POWER HDEm 662 Bedienungsanleitung

Landa

Landa HS-3000 Bedienungsanleitung

Craftsman

Craftsman 580.752270 Bedienungsanleitung

HIKOKI

HIKOKI AW 100 Bedienungsanleitung

Delco

Delco DC 1302 Bedienungsanleitung

Kärcher

Kärcher K 3 Full Control Bedienungsanleitung

BIEMMEDUE

BIEMMEDUE 120/10 - 170/13 Bedienungsanleitung

ARKSEN

ARKSEN 014-HG-14141-HR Bedienungsanleitung

Black & Decker

Black & Decker PW1700SPX Bedienungsanleitung

Kärcher

Kärcher 595 - SPARE Leitfaden

Kranzle

Kranzle B 10 200 Bedienungsanleitung

Stihl

Stihl RE 90 Bedienungsanleitung

PowR-Quip

PowR-Quip PQ-2600 Bedienungsanleitung

Hotsy

Hotsy 5645 Bedienungsanleitung