Nilfisk-Advance ATTIX 7 Bedienungsanleitung

ATTIX 7

ATTIX 19 GALLON

Instructions for use

107413879 A (07. 2018)

auto

ATTIX 7 2

41)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

1 IMPORTANT SAFETY INSTRUCTIONS

1.1 Symbols used to mark instructions

DANGER

Danger that leads directly to serious or irreversible injuries, or

even death.

WARNING

Danger that can lead to serious injuries or even death.

CAUTION

Danger that can lead to minor injuries and damage.

Before starting up your machine for the first time, this instruction manual must be read through

carefully. Save the instructions for later use.

1.2 Instructions for use

Besides the operating instructions and the binding accident prevention regulations valid in the country

of use, observe recognised regulations for safety and proper use.

1.3 Purpose and intended use

This machine is designed for industrial use, such as e.g. plants, construction sites and workshops.

This machine is also intended for commercial use, for example in hotels, schools, hospitals, factories,

shops, offices and rental businesses. Accidents due to misuse can only be prevented by those using

the machine. The appliance is suitable for picking up dry, non-flammable dust and liquids

Any other use is considered as improper use. The manufacturer accepts no liability for any damage

resulting from such use. The risk for such use is borne solely by the user. Proper use also includes

proper operation, servicing and repairs as specified by the manufacturer.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

For Dust Class L machines (with type designation -0L, 2L, LC) following applies:

The appliance is suitable for picking up dry, non-flammable dust, hazardous dusts with

OEL1) value > 1mg/m3. Dust Class L (IEC 60335-2-69). The dusts which belong to this

class have OEL1) values > 1mg/m3. For machines intended for the Dust Class L, the filter material is

tested. The maximum degree of permeability is 1% and there is no special requirement for disposal.

Observe national regulations before use. For dust extractors, ensure adquate air change rate L, when

the exhaust air is returned to the room.

1.4 Important warnings

WARNING

• To reduce the risk of fire, electric shock, or injury, please read and

follow all safety instructions and caution markings before use. This

vacuum cleaner is designed to be safe when used for cleaning

functions as specified. Should damage occur to electrical or me-

chanical parts, the cleaner and / or accessory should be repaired

by a competent service station or the manufacturer before use in

order to avoid further damage to the machine or physical injury to

the user.

1)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

• Children shall be supervised to make sure that they do not play

with the appliance.

• Cleaning and user maintenance shall not be made by children with-

out supervision.

• This appliance is not intended for use by persons (including chil-

dren) with reduced physical, sensory or mental capabilities, or lack

of experience and knowledge.

• Outdoor use of the appliance shall be limited to occasional use.

• This machine shall only be stored indoors.

• Do not leave the machine when it is plugged in. Unplug from the

socket when not in use and before maintenance.

• Do not use with damaged cord or plug. To unplug grasp the plug,

not the cord. Do not handle plug or cleaner with wet hands. Turn off

all controls before unplugging.

• Do not pull or carry by cord, use cord as a handle, close a door on

cord, or pull cord around sharp edges or cor ners. Do not run clean-

er over cord. Keep cord away from heated surfaces.

• Keep hair, loose clothing, fingers and all parts of the body away

from ope nings and moving parts. Do not put any objects into open-

ings or use with opening blocked. Keep openings free of dust, lint,

hair, and anything else that could re du ce the flow of air.

• Do not use in outside areas at low temperature.

• Do not use to pick up flammable or combustible liquids such as

gasoline, or use in areas where they may be pre sent.

• Do not pick up anything that is burning or smoking, such as ciga-

rettes, mat ches or hot ashes.

• Use extra care when cleaning on stairs.

• Do not use unless filters are fitted.

• If the cleaner is not working properly or has been dropped, da m-

a ged, left out doors, or dropped into water, re turn it to a service

center or dealer.

• Operators shall be adequately instructed on the use of these ma-

chines.

• The machine may not be used as a water pump. The machine is in-

tended for vacuuming air and water mixture.

• Connect the machine to a properly earthed mains supply. The

socket outlet and the extension cable must have an operative pro-

tective conductor.

• Provide for good ventilation at the working place.

• Do not use the machine as a ladder or step ladder. The machine

61)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

can tip over and become damaged. Danger of injury.

• Only use the socket outlet on the machine for purposes specified in

the Instructions.

• If foam or liquid escapes from the machine, switch off immediately.

1.5 Double-insulated appliances*)

CAUTION

• Use only as described in this manual and only with the manufactur-

er’s re com men ded attachments.

• BEFORE YOU PLUG IN YOUR CLEANER, check the rating plate

at the cleaner to see if the rated vol ta ge agrees within 10% of the

voltage available.

• This appliance is provided with double insu la tion. Use only identical

re pla ce ment parts. See instructions for ser vi cing double insulated

appliances.

• Clean the water level limiting device regularly and examine it for

signs of damage.

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No

grounding means is provided on a double-insulated appliance, nor should a mean for grounding be

added to the appliance. Servicing a double-insulated appliance requires extreme care and knowl-

edge of the system, and should be done only by qualified service personnel. Replacement parts for a

double-insulated appliance must be identical to the parts they replace. A double insulated appliance

is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.” The symbol (square

within a square) may also be used on the product.

The machine is equipped with a specially designed cord which if damaged, must be replaced by a

cord of the same type. This is available at authorised service centres and dealers and must be in-

stalled by trained personnel.

Only applicable to UK.

Please read these essential instructions

These instructions have been prepared with safety and efficiency paramount.

The machine operator must be trained by a suitably qualified instructor and must understand these

instructions for use, and be made aware of any relevant regulations and legislation in force at the

time of use.

CAUTION

DOUBLE-INSULATED MACHINES - IMPORTANT:

This 240 volt 50 Hz. machine is fitted with a 13 amp. 3 pin moulded

plug. The plug is fitted with a 13 amp. detachable fuse. The correct re-

placement for the fuse is identified by marking or colour coding. Only

fuses that are ASTA approved to BS 1362 should be fitted. Never use

the plug without the fuse cover fitted. Replacement fuse covers are

available at any electrical retail outlet.

If the available socket outlet is not suitable for the plug supplied, the plug must be cut off and an ap-

propriate plug fitted. The plug thus cut off MUST BE DESTROYED for safety reasons before being

disposed of.

1)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

Machines built for other voltages and frequencies are not normally supplied with a fitted plug.

If it is necessary to fit a plug, the wires in this power supply cord are coloured in accordance with the

following code:

Blue-neutral brown-live

TO CONNECT THE NEW PLUG:

If using a three-pin plug, do not make any connection to the the terminal in the

plug which is marked with the letter ‘E’ or by the safety earth symbol or coloured

green or green & yellow.

The blue wire must be connected to the terminal in the plug which is marked with

the letter ‘N’ or is coloured black or blue.

The brown wire which must be connected to the terminal in the plug which is

marked with the letter ‘L’ or is coloured red or brown.

If the plug to be fitted does not conform to the above notation then consult a qualified electrician.

1.6 Electrical connection

WARNING

• The upper section of the machine contains live components. Con-

tact with live components leads to serious or even fatal injuries.

Never spray water on to the upper section of the machine.

• The vacuum cleaner must not be used if the electrical cable or plug

show any sign of damage. Regularly inspect the cable and the plug

for damage. If this becomes damaged, it should be repaired only

by Nilfisk or an authorised Nilfisk Service Dealer, in order to avoid a

hazard.

• Do not handle the electrical cable or plug with wet hands.

• Do not unplug by pulling on cable. To unplug, grasp the plug, not

the cable. The plug must always be removed from the socket outlet

before starting any service or repair work of the machine or the ca-

ble.

• In no circumstances should the power supply cord be wrapped

around fingers or any part of the operators person.

• It is recommended that the machine should be connected via a residual current circuit breaker.

• Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so

that the protection class is maintained.

• Connectors and couplings of power supply cords and extension leads must be watertight.

Extension lead

• As an extension lead, only use the version specified by the manufacturer or one of a higher quality.

• When using an extension lead, check the minimum cross-sections of the cable:

Cable lenth Cross section

< 16 A < 25 A

up to 20 m 1.5 mm22.5 mm2

20 to 50 m 2.5 mm24.0 mm2

81)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

1.7 Hazardous materials

WARNING

Vacuuming up hazardous materials can lead to serious or even fatal in-

juries.

The following materials must not be picked up by the machine:

• hot materials (burning cigarettes, hot ash, etc.)

• flammable, explosive, aggressive liquids (e.g. petrol, solvents, ac-

ids, alkalis, etc.)

• flammable, explosive dust (e.g. magnesium or aluminium dust,

etc.)

For standard machines (without type designation -0L, 2L, LC) following

further applies: The following materials must not be picked up by the

machine:

• Hazardous dust.

1.8 Maintenance

Remove the plug from the socket before performing maintenance. Before using the machine make

sure that the frequency and voltage shown on the rating plate correspond with the mains voltage.

The machine is designed for continuous heavy work. Depending on the number of running hours –

the dust filter should be renewed. Keep the machine clean with a dry cloth, and a small amount of

spray polish.

During maintenance and cleaning, handle the machine in such a manner that there is no danger for

maintenance staff or other persons.

In the maintenance area

• Use filtered compulsory ventilation

• Wear protective clothing

• Clean the maintenance area so that no harmful substances get into the surroundings.

For Dust Class L machines (with type designation -0L, 2L, LC) following applies:

During maintenance and cleaning, handle the machine in such a manner that there is no danger for

maintenance staff or other persons.

In the maintenance area

• Use filtered compulsory ventilation

• Wear protective clothing

• Clean the maintenance area so that no harmful substances get into the surroundings.

During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily

must be:

• Packed in well sealed bags

• Disposed of in a manner that complies with valid regulations for such waste removal.

1.9 Regular servicing and inspection

Regular servicing and inspection of your machine must be carried out by suitably qualified personnel

in accordance with relevant legislation and regulations. In particular, electrical tests for earth continui-

ty, insulation resistance, and condition of the flexible cord should be checked frequently.

In the event of any defect, the machine MUST be withdrawn from service, completely checked and

repaired by an authorized service technician.

At least once a year, a Nilfisk technician or an instructed person must perform a technical inspection

including filters, air tightness and control mechanisms.

For details of after sales service contact your dealer or Nilfisk service representative responsible for

your country. See reverse of this document.

1)OEL=Occupational Exposure Limit, *) Optional accessories / Option depending on model

Original instruction

2.0 Warranty

Our general conditions of business are applicable with regard to the guarantee.

Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the ap-

pliance in a way other than for the intended purpose exempt the manufacturer from any liability for

the resulting damage.

As specified in European Directive 2012/19/EU on old electrical and electronic appliances, used

electrical goods must be collected separately and recycled ecologically. Contact your local au-

thorities or your nearest dealer for further information.

10 1) Option depending on model

Original Instruction Manual

2 Description

2.1 Purpose When used properly, the

industrial vacuum cleaners

described in these instructions

are suitable for sucking up dry,

non-ﬂ ammable, non-hazardous

dusts and li quids.

2.2 Operating elements See fold-out page at front of

these operating instructions.

1 Handle

2 Suction pipe support

3 Accessory holder

4 Applicance switch with suc-

tion power control1)

5 Retaining clamp

6 Dirt tank

7 Grip to empty tank 1)

8 Inlet fitting

9 Appliance socket 1)

10 Cable hook

11 Operating knob for filter

cleaning 1)

12 Connection for compressed

air supply 1)

13 Connection for pneumatic

tool 1)

14 Tank locks 1)

15 Castor with brake

3 Before starting

3.1 Assembling the

vacuum cleaner

1. The mains plug should not yet

be inserted into a socket.

2. Open the retaining clamps (1)

and remove upper section of

the cleaner.

3. Take the accessories1) out of

the dirt tank and the packag-

ing.

4. Place a ﬁ lter bag into the tank

as described in the instruc-

tions (printed on the ﬁ lter

bag).

IMPORTANT!

Press the ﬁ lter bag con nec tion

ﬁ rmly on to the inlet ﬁ tting.

5. Fit the upper section of the

cleaner (do not damage the

ﬁ lter bag) and close the re-

taining clamps.

NOTE!

Ensure that the retaining

clamps ﬁ t properly.

6. Fit the suction tube fastener1)

about 20 cm from the edge of

the lower extension tube as

shown in the ﬁ gure.

On delivery some of the accesso-

ries are lying in the tank and must

be removed before the vacuum

cleaner is used for the first time.

Remove the upper section of the

vacuum cleaner: The mains plug

should not yet be inserted into a

socket.

1) Option depending on model

Original Instruction Manual

4 Operation

4.1.2 Electrical connection The operating voltage shown on the

rating plate must correspond to the

voltage of the mains power supply.

4.1.3 Connecting electrical

appliances1)

Before switching the

switch to position „auto“,

ensure that the tool

connected to the appliance socket

is switched off.

To comply with regulations, only ap-

proved dust producing tools should

be connected.

The maximum power consumption

of the connected electrical appli-

ance is stated in section 9.4 "Tech-

nical data".

4.1 Connections

4.1.1 Connecting the suction

hose

4.2 Switching on the

vacuum cleaner

4.2.1 Switch position "I"

1. Turn the switch to position

"I".

The vacuum cleaner motor

starts.

1. Connect the suction hose.

1. Ensure that the cleaner is

switched oﬀ .

2. Insert the power cord into a

properly installed and fused

socket with earthing contact.

1. Connect the electrical ap-

pliance to the appliance

socket1) on the control panel.

4.2.2 Switch position "auto"1)

Before switching the

switch to position „auto“,

ensure that the tool

connected to the appliance socket

is switched off.

1. Turn the switch to position

"auto"1).

The vacuum cleaner motor

starts when the connected

power tool/pneumatic tool is

switched on.

2. When the power tool is

switched oﬀ , the vacuum

cleaner continues to run for

a short moment so that any

dust in the suction hose is

conveyed to the ﬁ lter bag.

4.1.4 Connecting pneumatic

tools1)

Before switching the

switch to position „auto“,

ensure that the tool

connected to the appliance socket

is switched off.

Operating pressure of the pneumat-

ic tool is stated in section 9.4 "Tech-

nical data".

1. Connect the pneumatic tool

to the upper quick coupling1)

on the control panel.

2. Connect the compressed air

supply to the lower push-in

nipple1).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nilfisk-Advance Staubsauger Handbücher

Nilfisk-Advance

Nilfisk-Advance Bravo Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 930 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GM80S Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance AERO 26-01 X Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 118EXP Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance MX 328 H Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GM 80 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Thor Handbuch

Nilfisk-Advance

Nilfisk-Advance cfm 125 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SMART Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Handy Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Buddy II Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 1000 Series Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 56315312 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance IVB 3-M Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance VHS120 L Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GM 80CR Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance UZ 934 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ALTO ATTIX 170 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance ATTIX 33 H Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GU 700A Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GD 5 BATTERY Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance 127 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance GWD120 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung