Norac UC4+ Bedienungsanleitung

Apache 859, 790 (2000+)

Installation Manual

Spray Height Controller

Improving the competitiveness of Industry and

Agriculture through Precision Measurement

Printed in Canada

Reorder P/N: UC4+BC+AP1-INST Rev A (Apache 859/790)

NOTICE

NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the

requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained

in this manual. The technical information in this manual was reviewed at the time of approval for publication.

TABLE OF CONTENTS

1INTRODUCTION .................................................................................................................................. 1

2GENERAL SYSTEM DESCRIPTION .................................................................................................. 2

3PARTS LISTS ...................................................................................................................................... 3

4INSTALLATION PROCEDURE ........................................................................................................... 7

4.1 EXISTING SYSTEM CHECK ............................................................................................................... 7

4.2 BOOM SPEED TEST........................................................................................................................ 7

4.3 WING SENSOR INSTALLATION......................................................................................................... 9

4.4 MAIN LIFT SENSOR INSTALLATION ................................................................................................ 12

4.5 ROLL SENSOR INSTALLATION ....................................................................................................... 13

4.5.1 Boom Frame Roll Sensor Mounting ...................................................................................... 14

4.5.2 Chassis Roll Sensor Mounting .............................................................................................. 15

4.6 HYDRAULIC INSTALLATION ........................................................................................................... 16

4.6.1 Valve Assembly ..................................................................................................................... 16

4.6.2 Valve Mounting...................................................................................................................... 16

4.6.3 Hydraulic Plumbing ............................................................................................................... 17

4.7 ELECTRICAL INSTALLATION .......................................................................................................... 18

4.8 COMPLETING THE INSTALLATION .................................................................................................. 21

5ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 22

5.1 ITEM C1: 44662B-40 –SENSOR TRUNK CABLE ........................................................................... 22

5.2 ITEM C2: 44668 –SENSOR BRANCH CABLE ................................................................................. 22

5.3 ITEM C02B: 44664 –CABLE UC4 CAN NODE DUAL .................................................................. 23

5.4 ITEM C10: 44650-12 –POWER CABLE VERSION 12...................................................................... 23

5.5 ITEM C11: 44658-07 –WIRING HARNESS UC3 BOOM CONTROL PIGTAIL TO SHROUD ................... 24

5.6 ITEM C12: 44659 –VALVE CASE/PATRIOT/APACHE ..................................................................... 25

1INTRODUCTION

Congratulations on your purchase of the NORAC UC4+ Spray Height Controller. This system is

manufactured with top quality components and is engineered using the latest technology to

provide operating features and reliability unmatched for years to come.

When properly used the system can provide protection from sprayer boom damage, improve

sprayer efficiency, and ensure chemicals are applied correctly.

Please take the time to read this manual completely before attempting to install the system. A

thorough understanding of this manual will ensure that you receive the maximum benefit from

the system.

YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have suggestions

regarding the parts list or the installation procedure, please don’t hesitate to contact us via

the information given below:

Phone: 1-800-667-3921 Canada (Toll Free)

1-866-306-6722 United States (Toll Free)

0-800-404-8389 United Kingdom (Toll Free)

1-306-664-6711 all other regions

E-mail: [email protected]

Website: www.norac.ca

2GENERAL SYSTEM DESCRIPTION

Figure 1 depicts the general system layout of the UC4+ Sprayer Boom Control system.

Figure 1 – System Components and General Location

NOTICE:

Every effort has been made to ensure the

accuracy of the information contained in this

manual. All parts supplied are selected

specially to fit the sprayer to facilitate a

complete installation. However, NORAC

cannot guarantee all parts fit as intended due

to the variations of the sprayer by the

manufacturer. Please read this manual in

its entirety before attempting installation.

ATTENTION:

When installing the UC4+ Spray Height

Control system please be aware that at a

point in the installation your sprayer booms

will be inoperative until the installation is

complete. Any installation procedure

requiring boom movement will need to be

done first. Once the hydraulics have been

disconnected you must complete the

electrical installation before the booms

become operative.

3PARTS LISTS

The parts that come with your UC4+ Spray Height Control system are listed in Table 1. The item

number on the left side of this table references each part.

Please ensure that all parts in your kit are present before proceeding with your installation.

Table 1 – Apache 859, 790 UC4+ Spray Height Controller System Parts (Rev A)

Item Part Number Name Quantity

B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1

B10 44700-06 BRACKET VALVE MOUNTING STD 1

B11 44743 MOUNTING BRACKET MAIN LIFT SENSOR UC4 PLUS 1

B13 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2

C01 44662B-40 CABLE UC3 SENSOR TRUNK AMPF TO AMPF BLACK STANDARD 40FEET 1

C02 44668 CABLE UC3 SENSOR BRANCH 1 AMP RECEPT 3 AMP PLUG BC 1

C02B 44664 CABLE UC4 CAN NODE DUAL 1

C10 44650-12 CABLE POWER UC3 BOOM CONTROL CASE IH 4260 1

C11 44658-07 WIRING HARNESS UC3 BOOM CONTROL PIGTAIL TO SHROUD 1

C12 44659 CABLE VALVE PATRIOT/CASE IH 4260 2

E01 4461BC+ UC4 PLUS BOOM CONTROL PANEL 1

E02 44631 UC4 ULTRASOUND SENSOR 3

E03 44641 UC4 PLUS ROLL SENSOR W TEMPERATURE PROBE 1

E04 44642 UC4 PLUS ROLL SENSOR 1

H02 44863-37 HOSE ASSEMBLY 122R2-06 24 IN L 6FJX90 6FJX 2

H20 44865-02 HYDRAULICS FITTING KIT - AP1 1

M01A 446BC+MAN6-1 MANUAL UC4+ BOOM CONTROL 2008 OPERATORS SMALL BOOKLET 1

M01B 446BC+MAN6-2 MANUAL UC4+ BOOM CONTROL 2008 QUICK REFERENCE SMALL BOOKLET 1

M10 UC4+BC+AP1-INST MANUAL INSTALLATION UC4+ APACHE 2001-2004 1

V01 44933S VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS VARIABLE RATE 1

Table 2 - 44865-02 (Rev A) - Hydraulics Fittings Kit Details

Item Part Number Name Quantity

Picture

F02 104369 PLUG - 6MBP 4

F03 104634 CAP - 6FJCN NO 6 FEMALE JIC 2

F04 103839 JIC T COUPLER - 6FJXR 6MJT 2

F05 103312 MALE ADAPTER - 6MB 6MJ 4

F08 44928 ORIFICE INSERT .047 IN ONE WAY 2

6 M B - 6 M OR X 90

SIZE IN

1/16TH'S

GENDER: MALE

OR FEMALE

90° ANGLE

SWIVEL

TYPE

GENDER

SIZE

TYPE:

B - ORB

J - JIC

OR - FLAT

FACE

P - PIPE

Fitting Name

Example:

The parts that come with your UC4 System are shown below in their general installation

configuration.

Figure 2 – UC4+ Spray Height Control system Components

Figure 3 – Hydraulic Plumbing Schematic

4INSTALLATION PROCEDURE

4.1 EXISTING SYSTEM CHECK

It is necessary to check the existing system’s

functionality before installing the UC4+

Spray Height Control system.

1. Drive your sprayer onto a flat piece of

land, with unobstructed boom movement

(e.g. no power lines).

2. Test that all boom functions operate

correctly. As you test each function

check it off in Table 3.

It is necessary to test the boom

functions in all directions

Table 3 – Hydraulic System Function

Check Sheet

BOOM

FOLD

OUT UP DOWN

LEFT

MAIN

RIGHT

ROLL* N/

*Some sprayers may not have this function.

4.2 BOOM SPEED TEST

IMPORTANT:

Raise/lower all boom sections several

times to warm up the hydraulic system.

Grease all moving parts for consistent

results.

1. Lower each boom and main section as

close to the ground as possible.

2. Set your sprayer at field working RPM

on the throttle and mark this value in

Table 4.

You will need a stopwatch or a

watch that displays “seconds” for

the next step.

3. Raise the LEFT boom from its extreme

LOW position to the very TOP of its

travel. Record the time this takes in

Table 4,“Trial #1” for “Left UP”.

4. Lower the LEFT boom from its extreme

HIGH position to the BOTTOM of its

travel. Record this time in Table 4,

Trial #1, for “Left DOWN”.

Be careful when lowering the

booms so they don’t hit the

ground.

5. Similarly, record two more time trials

(Trial #2 & #3) for the LEFT boom and

record in Table 4.

6. Repeat Steps 1 through 5 for the RIGHT,

MAIN and ROLL functions.

Your sprayer may not have a roll

feature.

7. Average the three trials recorded for

each boom movement and record this

calculation in the “Average Time” slot in

Table 4.

8. These “Average Times” now represent

how quickly your system can react to

manual control. In Section 4.8, this

procedure is repeated with the UC4+

Spray Height Control system installed

for comparison and troubleshooting

purposes.

Andere Handbücher für UC4+

Inhaltsverzeichnis

Andere Norac Steuerungssystem Handbücher

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC7 Bedienungsanleitung

Norac

Norac Case 44 Series Bedienungsanleitung

Norac

Norac UC7 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4 Plus Rogator 64 Series Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 MAX Bedienungsanleitung

Norac

Norac RG11 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC5 Can Bus Bedienungsanleitung

Norac

Norac UC7 Bedienungsanleitung

Norac

Norac Case AFS Pro 300 Bedienungsanleitung

Norac

Norac UC4 Total Control Bedienungsanleitung

Norac

Norac PULSE UC5 Gebrauchs- und Pflegehandbuch

Norac

Norac UC4 Plus Rogator 64 Series Bedienungsanleitung

Norac

Norac UC4 Total Control Bedienungsanleitung

Norac

Norac UC5 Topcon X30 Kurzanleitung

Norac

Norac John Deere 4720 Bedienungsanleitung

Norac

Norac UC4+ Bedienungsanleitung

Norac

Norac UC4.5 Bedienungsanleitung

Norac

Norac UC5 HD12 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung