NordicTrack GX 2.5 NTEX23012.0 Bedienungsanleitung

www.nordictrack.com

Model No. NTEX23012.0

Serial No.

Write the serial number in the space

above for reference.

Serial Number Decal

(under frame)

QUESTIONS?

if you have questions, or if parts

are damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

iMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-800-TO-BE-FIT

(1-800-862-3348)

Mon.=Fri. 6 a.m.=6 p.m. MT

Sat. 8 a.m.-4 p.m. MT

ON THE WEB:

www.nordictrackservice.com

;ER'S A UAL

TABLE OF CONTENTS

WARNING DECAL PLACEMENT ............................................................... 2

IMPORTANT PRECAUTIONS .................................................................. 3

BEFORE YOU BEGIN ........................................................................ 4

PART IDENTIFICATION CHART ................................................................ 5

ASSEMBLY ................................................................................ 6

HOW TO USE THE EXERCISE BIKE ........................................................... 12

FCC INFORMATION ........................................................................ 21

MAINTENANCE AND TROUBLESHOOTING ..................................................... 22

EXERCISE GUIDELINES .................................................................... 24

PART LIST ................................................................................ 26

EXPLODED DRAWING ...................................................................... 27

ORDERING REPLACEMENT PARTS .................................................. Back Cover

LIMITED WARRANTY ............................................................... Back Cover

WARNING DECAL PLACEMENT

This drawing shows the location(s) of the warning

decal(s), if a decal is missing or illegible, see

the front cover of this manual and request a

free replacement decal. Apply the decal in the

location shown. Note: The decal(s) may not be

shown at actual size.

Misuse of this machine

may result in serious

injury.

*Read user's manual

prior to use and follow

all warnings and

instructions.

*De not allow children

on or around machine.

*User weight must not

exceed 275 pounds.

*This product should

always be used on a

level surface.

.This product is not

intended for

therapeutic use.

*Replace label if

damaged, illegible,

or removed. [_

NORDICTRACK is a registered trademark of ICON IP, Inc.

iMPORTANT PRECAUTIONS

BEFORE YOU BEGIN

Thank you for selecting the revolutionary

NORDICTRACK <_'GX 2.5 exercise bike. Cycling is an

effective exercise for increasing cardiovascular fitness,

building endurance, and toning the body. The GX 2.5

exercise bike provides an impressive selection of fea-

tures designed to make your workouts at home more

effective and enjoyable.

For your benefit, read this manual carefully before

you use the exercise bike. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Length: 3 ft. 5 in. (104 cm)

Width: 1 ft. 11 in. (58 cm)

Heart Rate Monitor

Console

Handlebar

Seat

Seat Knob

Leveling Knob

Seat PostKnob

Pedal/Strap

Wheel

PART iDENTiFiCATiON CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.

M6 Split

Washer (74)-4 M8 Split M4 x 16mm M4 x 22mm

Washer (64)-8 Screw (43)-4 Screw (31)-4

M8 x 16mm

Screw (65)-8 M10 x 95mm

Screw (53)-4

M6 x 20mm

Screw (18)-4

ASSEMBLY

To watch an assembly

video, go to

http ://productvideo.co/

assembly/nordictrack or

use your mobile phone

or smartphone to read

the QR code at the right.

Assembly requires two

persons.

Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you finish all assembly steps.

Left parts are marked "L" or "Left" and right parts

are marked "R" or "Right."

To identify small parts, see page 5.

In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver (]_A::3=_

one adjustable wrench

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

.Set a sturdy piece of packing material under the

rear of the Frame (1). Have a second person

hold the Frame to prevent it from tipping

while you complete this step.

Identify the Rear Stabilizer (3). Note: The Rear

Stabilizer does not have wheels; the Front

Stabilizer (not shown) does have wheels.

Orient the Rear Stabilizer (3) so that the welded

tubes are facing away from the Frame (1).

Attach the Rear Stabilizer (3) to the Frame (1)

with two M10 x 95mm Screws (53).

Remove the packing material.

53 Welded

Tubes

.Set a sturdy piece of packing material under the

front of the Frame (1). Have a second person

hold the Frame to prevent it from tipping

while you complete this step.

Orient the Front Stabilizer (2) so that the wheels

are facing away from the Frame (1).

Attach the Front Stabilizer (2) to the Frame (1)

with two M10 x 95mm Screws (53).

Remove the packing material.

Wheel

3. 3

Loosen the Seat Post Knob (27) in the Frame (1)

a few turns.

Orient the Seat Post (6) as shown. Then, insert

the Seat Post into the Frame (1).

Slide the Seat Post (6) upward or downward to

the desired position, and tighten the Seat Post

Knob (27) into an adjustment hole in the Seat

Post.

Move the Seat Post (6) upward or downward

slightly to make sure that the Seat Post Knob

(27) is engaged in one of the adjustment

holes in the Seat Post.

Adjustment

,Orient the Seat (23) and the Seat Carriage (24)

as shown.

Attach the Seat (23) to the Seat Carriage (24)

with four M8 x 16mm Screws (65) and four M8

Split Washers (64).

423

i Ii

24_

.Remove the Seat Knob (26) from the Seat

Carriage (24). Hold the Seat Bracket (30) inside

the Seat Carriage to prevent it from moving.

Next, set the Seat Carriage (24) on the Seat

Post (6). Insert the Seat Knob (26) upward into

the Seat Post, and tighten the Seat Knob into the

Seat Bracket (30) inside the Seat Carriage.

.While a second person holds the Handlebar (5)

near the Upright (4), insert the Pulse Wire (61)

into the hole in the Upright and pull it out of the

top of the Upright.

Tip: Avoid pinching the wires. Attach the

Handlebar (5) to the Upright (4) with four

M6 x 20mm Screws (18) and four M6 Split

Washers (74).

418

Hole

Avoid

pinching

the wires

While a second person holds the Console (13)

near the Upright (4), connect the console wires

to the Extension Wire (59) and to the Pulse

Wire (61).

Insert the excess wire into the Upright (4) or into

the Console (13).

Tip: Avoid pinching the wires. Attach the

Console (13) to the Upright (4) with four M4 x

16mm Screws (43).

13 Avoid pinching

the wires

---_._ 43

.Orient the Upright (4) assembly and the Pivot

Cover (12) as shown.

Slide the Pivot Cover (12) upward to the

Handlebar (5). Tip: Bend and flex the Pivot

Cover slightly to slide it over the Handlebar.

Attach the Pivot Cover (12) to the Handlebar (5)

with four M4 x 22mm Screws (31).

Slide the Front Shield Cover (7) upward onto the

Upright (4).

While a second person holds the Upright (4)

near the Frame (1), connect the Extension Wire

(59) to the Main Wire (58).

Insert the Upright (4) into the Frame (1).

Tip: Avoid pinching the wires. Attach the

Upright (4) with four M8 x 16mm Screws (65)

and four M8 Split Washers (64).

Slide the Front Shield Cover (7) downward to the

Frame (1) and press it into place.

Avoid pinching

the wires

65 64

10. Identify the Right Pedal (21).

Using an adjustable wrench, firmly tighten the

Right Pedal (21) clockwise into the Right Crank

Arm (19).

Tighten the Left Pedal (not shown) counter=

clockwise into the Left Crank Arm (not shown).

Adjust the strap on the Right Pedal (21) to the

desired position, and press the ends of the

straps onto the tabs on the Right Pedal. Adjust

the strap on the Left Pedal (not shown) in the

same way.

Tab

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NordicTrack Heimtrainer Handbücher

NordicTrack

NordicTrack NTEX04911.2 Bedienungsanleitung

NordicTrack

NordicTrack Audio Rider R400 Bike Bedienungsanleitung

NordicTrack

NordicTrack Sl 728 Contour Plus Bedienungsanleitung

NordicTrack

NordicTrack VXR 475 NTEVEX84916.0 Bedienungsanleitung

NordicTrack

NordicTrack NTC89021 Bedienungsanleitung

NordicTrack

NordicTrack U100 Bike Kurzanleitung

NordicTrack

NordicTrack Commercial X22i Bedienungsanleitung

NordicTrack

NordicTrack Audiorider U300 Bike Bedienungsanleitung

NordicTrack

NordicTrack 9600 Bike Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack Gx5.1 Bike Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike Referenzhandbuch

NordicTrack

NordicTrack GX2.0 Bedienungsanleitung

NordicTrack

NordicTrack NTEVEX75010.0 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.0 Gw Bike Handbuch

NordicTrack

NordicTrack GX 2.7 Bedienungsanleitung

NordicTrack

NordicTrack Gx 3.4 Bike null

NordicTrack

NordicTrack C5 Zl Gw Bike Bedienungsanleitung

NordicTrack

NordicTrack SL 800 Kurzanleitung

NordicTrack

NordicTrack U100 Bike Bedienungsanleitung

NordicTrack

NordicTrack Commercial S22i Studio Cycle Bedienungsanleitung

NordicTrack

NordicTrack C2 Si Bike Bedienungsanleitung

NordicTrack

NordicTrack C7 Zl Bike Bedienungs- und Wartungshandbuch

NordicTrack

NordicTrack NTIVEX99414.0 Bedienungsanleitung

NordicTrack

NordicTrack NTEX02121-INT.2 Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung

KIDSFIT

KIDSFIT Cardio Kids 661 Bedienungsanleitung