NordicTrack Club cr NTL49008.0 Bedienungsanleitung

CAUT ON

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number Decal

QUEST ONS?

If you have questions, or if parts are

damaged or missing, DO NOT CON-

TACT THE STORE; please contact

Customer Care.

MPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-888-825-2588

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.nordictrackservice.com

USER'S MANUAL

Model No. NTL49008.0

Serial No.

Write the serial number in the space

above for reference.

www.nordictrack.com

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBEGIN .......................................................................6

ASSEMBLY ...............................................................................7

OWTOUSET EC ESTPULSESENSOR ...................................................14

OPERATIONANDADJUSTMENT ............................................................15

OWTOMOVET ETREADMILL ............................................................31

TROUBLES OOTING ......................................................................32

EXERCISEGUIDELINES ...................................................................36

PARTLIST ...............................................................................38

EXPLODEDDRAWING ......................................................................40

ORDERINGREPLACEMENTPARTS ..................................................BackCover

LIMITEDWARRANTY...............................................................BackCover

These drawings show the locations of the

warning decals. f a decal is missing or il-

legible, call the telephone number on the

front cover of this manual and request a

free replacement decal. Apply the decal

in the location shown. Note: The decals

may not be shown at actual size.

WARN NG DECAL PLACEMENT

NordicTrack is a registered trademark of ICON IP, Inc.

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. t is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should be used only by per-

sons weighing 350 lbs. (159 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

15), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 15. To purchase a surge suppressor,

see your local NordicTrack dealer or call the

telephone number on the front cover of this

manual and order part number 146148, or see

your local electronics store.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. f the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

TROUBLESHOOT NG on page 32 if the tread-

mill is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 17).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

WARN NG: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. CON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

MPORTANT PRECAUT ONS

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

19. The pulse sensor is not a medical device.

Various factors, including the user's move-

ment, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the “off” position when the

treadmill is not in use. (See the drawing on

page 6 for the location of the reset/off circuit

breaker.)

21. Do not attempt to move the treadmill until it is

properly assembled. (See ASSEMBLY on page

7, and HOW TO MOVE THE TREADM LL on

page 31.) You must be able to safely lift 45 lbs.

(20 kg) to move the treadmill.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. nspect and properly tighten all parts of the

treadmill regularly.

24. Never insert or drop any object into any

opening on the treadmill.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

26. The treadmill is intended for in-home use

only. Do not use the treadmill in any commer-

cial, rental, or institutional setting.

27. Over exercising may result in serious injury

or death. f you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

28. Do not store the television in temperatures

below -40° F (-40° C) or above 140° F (60° C).

Do not operate the television in temperatures

below 23° F (-5° C) or above 90° F (32° C).

29. To protect the treadmill and television during

lightning storms, unplug the power cord from

the wall outlet and disconnect the cable sys-

tem. This will prevent damage due to light-

ning and power line surges.

30. f an outside antenna or cable system is con-

nected, be sure that the antenna or cable sys-

tem is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National

Electrical Code, ANS /NFPA No. 70-1984, or

your local codes and ordinances provide in-

formation with respect to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location

of antenna discharge unit, connection to

grounding electrodes, and requirements for

the grounding electrode.

31. An outside antenna system should not be lo-

cated in the vicinity of overhead power lines

or other electric light or power circuits, or

where it can fall into such power lines or cir-

cuits. When installing an outside antenna sys-

tem, extreme care should be taken to keep

from touching such power lines or circuits, as

contact with them might be fatal.

32. To reduce the risk of electric shock, do not re-

move the cover or the back of the television.

There are no user serviceable parts inside.

Refer servicing to qualified service personnel.

SAVE THESE NSTRUCT ONS

Power Lines

Ground

Clamps

Ground

Clamps

Ground

Clamp

Bonding

Jumper

Standoff

Insulators

Antenna

Lead-in Wire

Ground Wire

Ground

Wire

Antenna

Discharge Unit

To External 75 Ohm

Terminal of Treadmill

Mast

Service

Entrance

Equipment

Power Service Grounding

Electrode System (e.g.

Interior Metal Water Pipe)

Service

Entrance

Conductors

Optional Antenna Grounding Electrode Driven 8

Feet (2.44 m) Into The Earth (If Required By Local

Codes). See NEC Section 810–21 (f).

33. Upon completion of any service or repairs to

the treadmill or the television, ask the service

technician to perform safety checks to con-

firm that the unit is in proper operating condi-

tion.

• Use No. 10 AWG (5.3 mm2) copper, No. 8

AWG (8.4 mm2)aluminum, No. 17 AWG (1.0

mm2) copper-clad steel or bronze wire, or

larger as a ground wire.

• Secure an antenna lead-in and ground

wires to the house with stand-off insulators

spaced from 4 to 6 feet (1.22 to 1.83 m)

apart.

• Mount an antenna discharge unit as close

as possible to where the lead-in enters the

house.

• Use a jumper wire not smaller than No. 6

AWG (13.3 mm2) copper, or the equivalent

when a separate antenna-grounding elec-

trode is used. See NEC Section 810-21 (j) or

your local codes and ordinances.

Note to CATV system installer: This reminder is

provided to call the CATV system installerʼs at-

tention to Article 820-40 of the NEC or your local

codes and ordinances that provide guidelines for

proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building, as close to the

point of cable entry as practical.

Thank you for selecting the revolutionary NordicTrack®

CLUB CR treadmill. The CLUB CR treadmill offers an

impressive selection of features designed to make

your workouts at home more enjoyable and effective.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEG N

andrail

Console

Key/Clip

Reset/Off

Circuit Breaker

Walking Belt

Power Cord

Idler Roller

Adjustment Bolts

Pulse Sensor

Walking Platform

Accessory Tray

Television

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of

the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-

cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: f a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

3/8" Star

Washer (2)–6

3/8" x 3 1/4" Patch Bolt (1)–6

#8 x 2 1/4" Machine Screw (3)–6

#8 x 1/2" Machine

Screw (4)–2

#6 x 5/8" Machine

Screw (114)–2

2. Insert the end of the Upright Wire (111), the 60"

TV Cable (128), and the 60" AV Wire (129)

through the looped plastic ties at the top of the

Upright (81). Make sure that the wires are be-

hind the crossbars on the Upright. Then, gen-

tly pull upward on the wires as you tighten the

plastic ties around the wires.

111

1. Make sure that

the Power Cord

(70) is unplugged.

Be careful not to

pinch the Power

Cord.

Slide the Upright Cover (not shown) off the

Upright (81).

Orient the Upright (81) and the plastic ties as

shown. Set the Upright on the tabs on the

Frame (53). Attach the Upright to the Frame with

four 3/8" x 3 1/4" Patch Bolts (1) and four 3/8"

Star Washers (2). Start all four Patch Bolts

before tightening any of them. Be careful not

to pinch any wires.

Tab

Plastic Ties

Crossbar

128

129

4. ave a second person hold the handrail assem-

bly near the Upright (81). Insert the Upright Wire

(111), the 60" TV Cable (128), and the 60" AV

Wire (129) upward through the center of the

handrail assembly.

Slide the bracket on the handrail assembly over

the crossbar on the Upright (81) and set the

handrail assembly on the Upright. Be careful

not to pinch any wires.

andrail

Assembly

3. Slide the Upright Cover (80) downward onto the

Upright (81). Be careful not to pinch the

wires. Be careful not to hit the ceiling.

Bracket

129

Crossbar

111

128

6. Align the holes in the Console (101) with the

holes in the handrail assembly and the holes in

the Upright (not shown). Attach the Console and

the handrail assembly to the Upright with two

3/8" x 3 1/4" Patch Bolts (1) and two 3/8" Star

Washers (2). Do not fully tighten the Patch

Bolts yet. Note: t may be helpful to press the

indicated bracket against the Upright and to

press down on the Console to align the

holes.

5. ave a second person hold the Console (101)

near the handrail assembly.

Connect the Upright Wire (111) and the handrail

wires to the console wires. Make sure that the

console wire and the handrail wire that you are

connecting have connectors that are the same

size. See the lower drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and

then try again. F THE CONNECTORS ARE

NOT CONNECTED PROPERLY, THE CON-

SOLE MAY BE DAMAGED WHEN THE

POWER S TURNED ON.

Connect the 60" TV Cable (128) and the 60" AV

Wire (129) to the AV wires extending from the

Console (101).

Insert the excess wires down into the Upright

Cover (80).

Set the Console (101) on the handrail assembly.

Be careful not to pinch any wires.

101

111

Console

Wires

111

Console

Wire

101

andrail

Assembly

andrail

Assembly

andrail

Wires

andrail

Wire

Wires

129

128

Bracket

Inhaltsverzeichnis

Andere NordicTrack Tretmühle Handbücher

NordicTrack

NordicTrack T20.0 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL14011.0 Bedienungsanleitung

NordicTrack

NordicTrack 30505.0 Bedienungsanleitung

NordicTrack

NordicTrack T16.0 Treadmill Kurzanleitung

NordicTrack

NordicTrack NETL29716.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL29221-INT.0 Bedienungsanleitung

NordicTrack

NordicTrack NTL12940 Bedienungsanleitung

NordicTrack

NordicTrack X7i incline trainer NTL19910.0 Bedienungsanleitung

NordicTrack

NordicTrack NTTL25900 Bedienungsanleitung

NordicTrack

NordicTrack C2050 NTL10951 Bedienungsanleitung

NordicTrack

NordicTrack NTTL15083 Bedienungsanleitung

NordicTrack

NordicTrack Powertread 1750 Bedienungsanleitung

NordicTrack

NordicTrack NTL10941 Bedienungsanleitung

NordicTrack

NordicTrack 2450 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack Incline Trainer X9i Treadmill Bedienungsanleitung

NordicTrack

NordicTrack Commercial CT Bedienungsanleitung

NordicTrack

NordicTrack C1630PRO Bedienungsanleitung

NordicTrack

NordicTrack C200 Bedienungsanleitung

NordicTrack

NordicTrack C2400 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack NTL19010.1 Bedienungsanleitung

NordicTrack

NordicTrack Exp 3000 Treadmill Bedienungsanleitung

NordicTrack

NordicTrack C900 Pro Bedienungsanleitung

NordicTrack

NordicTrack A2350 Bedienungsanleitung

NordicTrack

NordicTrack C 700 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

Master

Master F22 Bedienungsanleitung

Precor

Precor PRECISION SERIES Technisches Handbuch

Horizon Fitness

Horizon Fitness DT680 Bedienungsanleitung

Matrix

Matrix T130 XI Bedienungsanleitung

NordicTrack club cr NTL49008.0 Bedienungsanleitung

Beliebte Tretmühle Handbücher anderer Marken