Oase 6600 Bedienungsanleitung

Waterfall Pump 6600 / 8000

Operating instructions

Notice d’emploi

Instrucciones de uso

- English -

REMINDER

CALL 1-866-627-3435

BEFORE RETURNING TO STORE.

Part Description QTY

A Pump 1

B 1½ in. and 2 in. ID tubing adapter 2

C Gasket 2

Information about these operating instructions

Welcome to OASE Living Water. You made a great choice with the purchase of this product Waterfall Pump 6600 /

8000. Prior to operating the unit, please read the instructions of use carefully and fully familiarize yourself with the unit.

Ensure that all work on and with this unit is only carried out in accordance with these instructions. Please strictly follow the

enclosed instructions to ensure safe and correct handling of the product. Keep these instructions in a safe place. Please

also hand over the instructions when passing the unit on to a new owner.

A. C.

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

WARNINGS AND CAUTIONS SYMBOLS

Symbols used in these instructions

The symbols used in this operating manual have the following meanings:

Risk of injury to persons due to dangerous electrical voltage.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Risk of personal injury caused by a general source of danger.

This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate measures are

not taken.

Important! The unit’s magnetic eld may affect the function of pacemakers.

Important information for trouble-free operation.

Intended use

Waterfall Pump 6600 / 8000, referred to in the following as “unit”, may only be used as specied in the following:

• For pumping normal pond water for lters, waterfalls and water courses.

• Operation under observance of the technical data.

The following restrictions apply to the unit:

• Do not use in swimming pools.

• CAUTION - this pump has been evaluated for use with water only.

• Never run the unit without water.

• Do not use for commercial or industrial purposes.

• Do not use in conjunction with chemicals, food products, easily ammable or explosive substances.

• Do not connect to the domestic water supply.

• Do not exceed the voltage shown on the pump.

• Do not remove the grounding pin from the power cord plug.

• Inspect the power cord for damage before installation and maintenance.

Use other than that intended

This unit can be dangerous and cause harm if not used in accordance with these instructions. Any use not in accordance

with these instructions or modication(s) to the unit will void the limited warranty.

- English -

Installation

WARNING

Risk of electric shock – This pump is supplied with a grounding conductor and grounding-type attachment plug. To

reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type

receptacle.

2. Attach the adapter to the pump rst, then connect tubing

to the adapter.

NOTE: Tubing is NOT INCLUDED.

3. Attach the other end of the tubing to desired water

feature or spillway.

Submerged installation

1. For maximum water ow, it is recommended that the

largest tubing size for your pump is used.

○ If needed, cut the adapter as shown using a hacksaw;

consult packaging for tubing size.

Important:

● The unit can be placed within the pond (submerged) or outside of the pond (dry)

●It is recommened to place the unit horizontally on the ground ensuring its stable position.

●Do not lift the pump by its power cord. Use the handle to lift and maneuver the pump.

Tubing

Adapter

Pump

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Start-up

Attention! The pump must never run dry.

Possible consequences: The pump will be destroyed.

Protective measures: Check the water level at regular intervals. Always place the unit below water level.

Attention! The installed temperature sensor automatically turns the pump off, if it is overloaded. The pump

automatically switches on again once the motor has cooled down. Risk of accident!

Install the unit so that it is not exposed to direct sun radiation (max. 104 ºF - 40 ºC).

Important:

● The unit switches on automatically when power connection

is established.

1. Switching on: Connect power plug to the socket.

2. Switching off: Disconnect the power plug.

2. Mount pump to desired area using the

holes on the bottom of the pump base.

Dry installation

1. Remove screen from pump. 1.

3. Attach both adapters to the pump rst using the

gasket then connect tubing to the adapters.

○ If needed, cut the adapter using a hacksaw;

consult packaging for tubing size.

NOTE: Tubing is NOT INCLUDED.

●To prevent air from being taken in, ensure that unit

and supply hose are always below the water level.

Tubing

Adapter

Pump

Adapter

Installation (cont.)

Tubing

Gasket

- English -

Maintenance and cleaning

Attention! Dangerous electrical voltage.

Possible consequences: Death or serious injuries.

Protective measures:

• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the

units and installations (switch off and disconnect from the power supply) before reaching into the water.

• Isolate the unit before starting any work.

• Secure the unit to prevent unintentional switching on.

Cleaning the unit

● Regular cleaning of the pump may be necessary depending upon the

environment in which it is operated. Clean the pump when it is visibly

soiled or when a drop in performance is detected. Clean the unit with

warm water using a soft brush.

●Never use aggressive cleaning agents or chemical solutions. These

could attack the housing surface or impair the function.

●In the event of stubborn furring (calcium deposits), a common

household cleaner free from vinegar and chlorine can be used.

Subsequently, clean the pump thoroughly using warm water.

Cleaning the pump

1. Disconnect the pump from the power source

○ Disconnect the tubing.

2. Remove the screen and disassemble the impeller

housing by unscrewing the screws to expose the

impeller assembly.

3. Remove the impeller assembly by pulling on the back

round plate behind the impeller

4. Use a soft cloth or brush to clean the impeller assembly

and the inside of the impeller housing.

●Check parts for damages such as cracked shaft,

cracks in the bearing, and broken plastics. Replace

parts if necessary.

5. Reassemble in the reverse order.

- English -

Questions, problems, missing parts?

Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email

us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com

Storage/Winterization

● Put the unit out of operation at water temperatures below 46 °F (8 °C) or, at the latest, when freezing temperatures are

to be expected.

● Thoroughly clean the unit, check for damage.

● Ensure that the storage place is inaccessible to children.

Wear parts

The impeller unit is a wear part and is excluded from the warranty.

Disposal

Do not dispose of this unit with domestic waste! Disable the unit beforehand by cutting off the cables. Further

information about the recycling of this product can be obtained from your local municipal authority.

Issue Cause Solution

The unit is not

performing its

suction function

Power supply not connected Connect pump power supply, check the supply lines to make sure

the voltage is correct

Impeller blocked, shaft broken Remove the inlet screen and/or pump cover, and impeller

housing to expose the impeller. Turn the impeller to ensure that it

is not broken or jammed by debris. Also check to make sure that

the ceramic shaft or bearings are not broken.

Pump is not completely

submerged

Completely submerge the pump or make sure inline setup is

completely below the water line.

Insufcient ow Pump is not completely

submerged

Completely submerge the pump or make sure inline setup is

completely below the water line.

Screen clogged Clean

Tubing blocked Clean or replace tubing

Tubing kinked Eliminate kink, replace tubing if it is damaged

Excessive ow loss in the

tubing due to friction

○ Reduce tubing length to reduce frictional loss

○ Select larger hose diameter, adapt stepped hose adapter to

hose diameter.

Pump overload. The ow is

automatically stopped to protect

the pump.

○ Clean the pump housing and impeller assembly

○ Reduce the ambient temperature (e.g. ensure that the specied

water temperature is adhered to, avoid direct sunlight)

Impeller worn Replace impeller

Unit switches

off after a short

running period

Excessive soiled water Clean impeller housing, bearing and impeller assembly

Impeller blocked, shaft broken Remove the inlet screen and/or pump cover, and impeller

housing to expose the impeller. Turn the impeller to ensure that it

is not broken or jammed by debris. Also check to make sure that

the ceramic shaft or bearings are not broken.

Water temperature too high Maximum water temperature: +95° F (+35 °C)

Troubleshooting

Model Model

No.

Rated

voltage

Power

consumption

Max. ow

rate

Max. head

height

Cord

length

Connection

for hoses Dimensions Weight

6600 45425

120V /

60 Hz

460 W / 3.8 A 6,600 GPH 26.5 ft. 20 ft.

1 1/2”, 2”

11.9 x 6.8 x 8.6 in.

14.5 lbs.

8000 45426 650 W / 4.8 A 8,000 GPH 32 ft. 20 ft. 11.9 x 6.8 x 8.6 in.

Waterfall Pump

Pos.

Waterfall Pump

6600 8000

1 1-1/2 in. and 2 in. ID tubing adapter 1-1/2 in. and 2 in. ID tubing adapter

2 Screen Screen

3 Screw Screw

4 Impeller housing Impeller housing

5Impeller Assembly Impeller Assembly

6 O-ring O-ring

7 Gasket Gasket

- English -

RAPPEL

APPELEZ LE 1-866-627-3435

AVANT DE RETOURNER AU MAGASIN.

OASE North America INC. · www.oase-livingwater.com

46631/09-16

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Oase Wasserpumpe Handbücher

Oase

Oase Aquarius Fountain Set Classic Series Bedienungsanleitung

Oase

Oase AquaMax Eco Twin 20000 Bedienungsanleitung

Oase

Oase Aquarius Universal Classic 600 Bedienungsanleitung

Oase

Oase AQUARIUS SOLAR Bedienungsanleitung

Oase

Oase OxyMax 100 Bedienungsanleitung

Oase

Oase Pondovac Bedienungsanleitung

Oase

Oase BITRON C UVC Bedienungsanleitung

Oase

Oase AquaMax Eco Twin 20000 Bedienungsanleitung

Oase

Oase AQUARIUS UNIVERSAL 180 Bedienungsanleitung

Oase

Oase AquaOxy 500 Bedienungsanleitung

Oase

Oase ProMax Garden Automatic 3500 Bedienungsanleitung

Oase

Oase Neptun 1600 Bedienungsanleitung

Oase

Oase HeatUp 150 Bedienungsanleitung

Oase

Oase ProMax Pressure Well 3000/18 Bedienungsanleitung

Oase

Oase OptiMax 85i Bedienungsanleitung

Oase

Oase AquaMax Eco Premium 6000/12 V Bedienungsanleitung

Oase

Oase ProMax Pressure Automatic 5500/5 Bedienungsanleitung

Oase

Oase Profimax 7000 Bedienungsanleitung

Oase

Oase AquaMax Eco Gravity 10000 Bedienungsanleitung

Oase

Oase Profinaut 21 Bedienungsanleitung

Oase

Oase OptiMax 2000 Produktinformationsblatt

Oase

Oase ProMax Pressure Automatic 5500/5 Bedienungsanleitung

Oase

Oase AquaMax Eco Expert 21000 Leitfaden

Oase

Oase Nautilus 50 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung