Olympus IX2-DSU Bedienungsanleitung

DISK SCANNING BIOLOGICAL MICROSCOPE

Petition

Thank you for your adoption of OLYMPUS microscope, this time.

Please read this manual carefully in order to get optimum performance of this microscope

and for safety considerations.

When using microscope, please have this manual by you and keep it with care.

X6608

CONTENTS

Correct assembly and adjustments are critical for this system to manifest its full performance. If you are going to

assemble the microscope yourself, please read section 8, “ASSEMBLY” carefully.

INTRODUCTION - Be sure to read this section for safe

use of the equipment. -......................................................1

Caution ............................................................................................................... 1

Suggestions to unpacking ....................................................................... 1

Safety Caution ..................................................................................... 2

Symbol for safety considerations..............................................................................3

Warning labels .........................................................................................................4

When using the system ............................................................................ 5

Cleanup and storage................................................................................. 5

Caution....................................................................................................... 5

Manual conventions.................................................................................. 6

I. System Outline

1 SYSTEM OUTLINE....................................................... 1-1

1-1 Principle............................................................................................1-1

1-2 Features ............................................................................................1-2

1-3 System Configuration...................................................................... 1-3

1-3-1 In case of BX series.....................................................................................1-3

1-3-2 BX-DSU .......................................................................................................1-4

1-3-3 In case of IX series ......................................................................................1-5

1-3-4 IX2-DSU.......................................................................................................1-6

CONTENTS

II. DSU

2 SUMMARY OF OBSERVATION PROCEDURES ........ 2-1

3 DETAILS OF EACH OPERATION................................ 3-1

3-1 General Precaution for observation............................................... 3-1

3-2 Selection of fluorescent mirror unit............................................... 3-2

3-3 Table of Combination – Objective lens to each observation and

applicable disk ................................................................................. 3-5

3-4 Assignment of operating buttons on body (BX61, BX62 or BX61WI

only)................................................................................................... 3-7

3-5 Powering up ..................................................................................... 3-8

3-6 Focusing........................................................................................... 3-8

3-7 Changeover of visual mirror unit (front side)................................ 3-9

3-7-1 In case of BX ...............................................................................................3-9

3-7-2 In case of IX.................................................................................................3-9

3-8 Disk IN/OUT .................................................................................... 3-10

3-9 Shutter OPEN/CLOSE.................................................................... 3-10

3-9-1 In case of BX .............................................................................................3-10

3-9-2 In case of IX...............................................................................................3-10

3-10 Changeover of camera mirror unit (rear side)........................... 3-11

3-11 Filter change................................................................................. 3-11

3-12 Adjustment of field iris diaphragm............................................. 3-12

3-13 Lamp centering ............................................................................ 3-13

3-14 Camera focus alignment ............................................................. 3-15

3-15 Power shutdown .......................................................................... 3-15

4 VARIETIES OF OBSERVATION METHODS ............... 4-1

4-1 Visual observation (BX)................................................................... 4-1

4-1-1 Simultaneous observation of reflected-light fluorescent and phase contrast 4-1

CONTENTS

4-1-2 Simultaneous observation of reflected-light fluorescent and transmitting

Nomarski differential interference.................................................................4-2

4-2 Visual observation (IX) ....................................................................4-4

4-2-1 Simultaneous observation of reflected-light fluorescence and phase contrast4-4

4-2-2 Simultaneous observation of reflected-light fluorescence and differential

interference (transmitting) ............................................................................4-5

4-3 Camera observation (BX-IX) ........................................................... 4-6

4-3-1 Transmitting bright-field and transmitted light phase contrast observation ...4-6

4-3-2 Transmitting differential interference observation.........................................4-6

5 TROUBLESHOOTING GUIDE ..................................... 5-1

6 SPECTRAL CHARACTERISTICS OF FILTERS ......... 6-1

7 SPECIFICATIONS ........................................................ 7-1

7-1 BX Series ..........................................................................................7-1

7-2 IX Series............................................................................................7-2

8 ASSEMBLY................................................................... 8-1

8-1 System block diagram.....................................................................8-1

8-1-1 In case of BX ...............................................................................................8-1

8-1-2 In case of IX.................................................................................................8-2

8-2 Installation of light illuminator........................................................ 8-3

8-2-1 In case of BX ...............................................................................................8-3

8-2-2 In case of IX.................................................................................................8-4

8-3 Installation of disk box ....................................................................8-4

8-4 Removal of transportation lock ......................................................8-5

8-5 Installation of illuminator ................................................................8-6

8-6 Installation of lamp house............................................................... 8-6

8-7 Installation of mercury lamp ........................................................... 8-7

8-8 Lamp power supply setting ............................................................8-9

CONTENTS

8-9 Installation of front side turret...................................................... 8-10

8-9-1 In case of BX .............................................................................................8-10

8-9-2 In case of IX...............................................................................................8-10

8-10 Installation of visual mirror unit (front side) ............................. 8-11

8-10-1 In case of BX ...........................................................................................8-11

8-10-2 In case of IX.............................................................................................8-12

8-10-3 Method to make optionnal fluorescent mirror unit.....................................8-13

8-11 IN/OUT of rear side turret ............................................................ 8-14

8-12 Installation of camera mirror unit (rear side) ............................ 8-14

8-13 Disk installation and change ...................................................... 8-15

8-14 Installation of light shielding tube (BX61, BX62, BX51 or BX52)8-16

8-15 Installation of UV-cut plate.......................................................... 8-17

8-15-1 In case of BX ...........................................................................................8-17

8-15-2 In case of IX.............................................................................................8-17

8-16 Installation of filter or shutter (In case of U-FWR or IX2-SHA) 8-17

8-17 Filter IN/OUT inside motorized filter wheel ............................... 8-18

8-18 Field iris diaphragm IN/OUT ....................................................... 8-19

8-19 Installation of camera adapter and filter.................................... 8-20

8-19-1 In case of DSUC-mount adapter.............................................................8-20

8-19-2 C-mount adapter for DSULAMBDA10 / C-mount adapter for Ludl............8-20

8-20 Installation of camera.................................................................. 8-22

8-21 DIP switch settings on control box (BX61, BX62 and BX61W1

only)................................................................................................. 8-23

8-22 Installation of motor drive board................................................ 8-23

8-23 Z board setting and installation.................................................. 8-24

8-23-1 In case of BX61 and BX62 .......................................................................8-24

8-23-2 In case of BX61W1 ..................................................................................8-25

8-23-3 In case of IX81.........................................................................................8-26

INTRODUCTION

Page

INTRODUCTION

- Be sure to read this section for safe use of the equipment. -

Caution

This manual – part or whole, shall not be used or reproduced without permission.

Suggestions to unpacking

Release of transportation lock for disk unit

When powering up the control box without removing

transportation lock knob, the disk unit may be

damaged.

1. Loosen two fixing screws (2) of access panel (1) on top of disk box,

using dedicated the Allen screwdriver that comes with microscope

frame as accessory and detach the access panel (1).

2. Loosen fixing screw (3) from hole located at left side of disk box,

using the Allen screwdriver and pull up the disk unit (4).

Pull up the disk unit carefully so as not to hit it inside

wall of disk box.

Note

(1)

(2)

(3)

(4)

(9)

INTRODUCTION

2Page

3. Loosen knob (5) of disk unit (at 2 places) and open disk protective

covers (6).

4. Loosen transportation lock knob (7) and remove it from the disk

unit (4).

Install the transportation lock knob you removed to the threaded

hole (8) of disk unit.

The transportation lock knob may be used for re-

transportation. Keep it with care.

When you continue to install disk, see Section 8-13 Disk

installation and change.

5. Return disk protective covers (6) to original position and tighten

knob (5) of disk unit (at 2 places) and fix the covers.

6. Align mount dovetail of disk unit (4) and mount dovetail (9) inside

the disk box and push the disk unit from top until it hits to dead

end.

7. Tighten fixing screw (3) with use of the Allen screwdriver and fix it.

8. Attach access panel (1) on top of disk box and tighten fixing

screws (2) (at 2 places) and fix it.

Safety Caution

lWhen you change disk, turn power of control box to OFF position and wait for one minute or more until the

turn of disk is completely stopped. The disk turns very rapidly so that they may be a danger to squeeze your

finger.

lWhen you change mirror unit for camera observation, change it after you turn the power of control box to

OFF position. During the change, it may be a danger to squeeze your finger if you accidentally touch the

changeover switch.

lDo not touch surface of disk with your hand. If the disk is blurred, observation image may be deteriorated.

lDo not touch lamp house mount adapter with your hand when the system is in use. As the adapter is

installed near the lamp house, the surface will get high temperature.

lDo not put power cord in the vicinity of lamp house. Lamp house will be of very high temperature. If power

cord touched the lamp house, the cord may be molten which would cause an electric shock.

Note

(5)

(7)

(6)

(7)

(5)

(8)

INTRODUCTION

Page

lDo not turn the lamp ON without installing lamp house to microscope. Ultraviolet ray of lamp is hazardous to

your eyes. Do not look at the light from lamp house directly.

lDo not look at excited light directly. When you use microscope, attach ultraviolet ray cutting plate and see

specimen and others through ultraviolet ray cutting plate for sure.

lWhen you change mirror unit at front side turret and rear side turret, observe the placement to the light path

in order of 1. fluorescent mirror unit and 2. reference mirror (No.1 position at each turret). If reference mirror

were set in front side turret and rear side turret, strong light would be applied to the specimen and it is

dangerous. (Regarding method of changeover for front and rear side turret, refer to Section 3-7

Changeover of mirror unit for visual observation (front side) and 3-10 Changeover of mirror unit for camera

observation (rear side).

Symbol for safety considerations

This system comes with the following symbols.

Understand the meaning of symbol and handle it safely.

Symbol Meaning

Do not touch with your hand as the surface is very hot.

It may cause a burn.

Be careful so as not to entangle your finger with disk or mirror unit for camera

observation.

Please read instruction manual definitely before you use the system.

In case of erroneous handling, it may cause injury of user or damage to

product.

Main switch is ON.

Main switch is OFF.

INTRODUCTION

4Page

Warning labels

Warning label is attached to the place where caution is particularly required for operation. Observe the

instructions.

Lamp house mount adapter (Hot Surface caution)

Disk box (Entanglement caution)

When warning label is blurred or peeled off, contact our local sales office for change.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus BHSU Montageanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Olympus

Olympus SZX16 Installationsanleitung

Olympus

Olympus IX2-RFSPOT Bedienungsanleitung

Olympus

Olympus DP71 Bedienungsanleitung

Olympus

Olympus FH Bedienungsanleitung

Olympus

Olympus VMF Bedienungsanleitung

Olympus

Olympus FV1200 MPE Bedienungsanleitung

Olympus

Olympus SZ3060 Betriebsanleitung

Olympus

Olympus K Betriebsanleitung

Olympus

Olympus CX43-RFAB Bedienungsanleitung

Olympus

Olympus U-UVF248A Bedienungsanleitung

Olympus

Olympus CKX31 Betriebsanleitung

Olympus

Olympus DSX1000 Bedienungsanleitung

Olympus

Olympus FV3000 Bedienungsanleitung

Olympus

Olympus BX-URA2 Bedienungsanleitung

Olympus

Olympus U-FWT Bedienungsanleitung

Olympus

Olympus BX-RLA2 Bedienungsanleitung

Olympus

Olympus 1X71 Bedienungsanleitung

Olympus

Olympus BHTU-112 Bedienungsanleitung

Olympus

Olympus BX61WI Bedienungsanleitung

Olympus

Olympus BH2-5RE Montageanleitung

Olympus

Olympus FV3000 Benutzerhandbuch

Olympus

Olympus SZX7 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung