Optilia Flexia Definition HM ESD Bedienungsanleitung

This manual describes how to setup and use Flexia Definition Digital (ESD-protected and Blue)

Instructions Manual

Flexia Video Inspection Microscope

Flexia Definition HM ESD

Flexia Definition ESD

Flexia Definition HM Blue

Flexia Definition Blue

Contents

1. Safety and maintenance Instructions 3

2. About Flexia 4

3. Installation 5

4. Image view & Capture in OptiPix software 5

5. Working distance and Focus adjustment 6

6. Illumination 7

7. Notes 8

1. Safety and maintenance Instructions

Avoid looking directly into the lenses when illumination is turned on.

Do not scratch or hit optical surfaces of Flexia! This precaution is

important especially when you operate the device on free hand.

Only use DC Power Sources provided or approved by Optilia.

Only use accessories provided or approved by Optilia.

Keep Flexia clean. Use Lens Cleaning Tissue and Pure Ethanol or

Isopropyl alcohol for cleaning optical surfaces of the device.

Never use Acetone or other similar strong solvents for cleaning.

Never knock or drop the video microscope.

Keep the microscope away from direct sun-light, heat and extreme

humidity.

Store the equipment inside its transport case when not used.

Protect the Flexia lens, Objective lens and Zoom lens by the supplied

protection rubber Caps or store them inside their boxes when the

equipment is not used.

This device is precision optical equipment and shall be

handled with great care!

Avoid looking directly into the lenses when illumination

is turned on!

2. About Flexia

Flexia is a lightweight, mobile and highly flexible digital video microscope with

zoom optics and built-in long-life LED illumination adapted to the electronics

industry. Flexia provides excellent live image quality, flexibility, digital image

recording and documentation.

The microscope delivers a digital USB 2.0 signal for recording pictures or

performing software measurements. Flexia is designed for mobile and flexible

inspection, quality control, measurement and digital recording.

There are four different versions of Flexia available:

ESD, HM ESD, BLUE and HM Blue.

ESD means that Flexia housing and cables are ESD protected. Flexia ESD is

fully safe for inspection of sensitive electronic boards and devices.

HM implies that Flexia provides with even higher magnification capabilities and

larger working distance.

Illumination control

(Dimmer)

AUX DC output

12/5V 15W

Supporting pin and

Focus adjuster

Zoom ring/ Focus position

Lens

Pull out to remove.

Push in to snap.

Image capture switch

On/Off switch

and indication

LED

Threaded hole for

Stand (UNC ¼” -20)

3. Installation

Flexia is directly connected to USB2.0 port of PC or Laptop with MS-Windows

OS. Follow the instructions below to install Flexia to a PC.

1. Ensure that Flexia is not plugged to the USB port before installing the

drivers.

2. Insert the provided installation CD into your PC and follow the on

screen instructions.

3. When the installation is finished you have to reboot the PC before

connecting the device.

4. When the PC is rebooted insert Flexia into one of the available USB2.0

port. The drivers will now be automatically found.

4. Image view & Capture in OptiPix software

Flexia in combination with Optilia OptiPix Measurement and Analysis

Software, the system becomes a flexible and powerful digital vision system

for performing accurate measurements, analysis, documentation and

reporting.

1. Ensure that Flexia drivers are installed, see chapter installation for further

instructions.

2. Install Optilia OptiPix from the provided installation CD. On “Select OptiPix

Version” dialog box, select:

a. “OptiPix Full” if you have ordered a full license and the software

protection USB dongle. All software functions will be enabled.

Insert the dongle into a free USB port of your computer. Enter your

license number.

b. “OptiPix Lite” if you have ordered a lite license. Image view, capture,

annotation and only distance measurement on image will be

enabled. Enter your license number.

c. 30 days demo for 30 days trial. All software functions will be enabled

for 30 days.

3. Select “Optilia 2.0MP Camera” in the next dialog, which will start

monitoring live image.

4. Select Device/Device Resolution to adjust image resolution.

5. Select Device/Device Properties to adjust image properties.

6. To snap a picture select a folder in the tree view then press F11 or the

trigger button of the device.

7. For further instructions and functionality, refer to the Quick Help. Select

Help/Quick Help to open the Quick Help.

5. Working distance and Focus adjustment

Image magnification (as well as the object distance) is changed by rotating

the “zoom ring” as illustrated below. Move Flexia slightly forward/backward

and rotate the Zoom adjuster to get into the best focus.

6. Illumination

Flexia lenses are equipped with high intensity white light emitting diodes.

Illumination intensity of the device can be adjusted via the control knob at the

rear of Flexia. The illumination may be turned on or off by using the on/off

switch.

Telescopic pin

Zoom ring

Illumination intensity

control (Dimmer)

On/Off switch

and indication

LED

7. Notes

…………………………………………………………………………………………………………

Instruments AB,s Video Microscope Flexia Definition ESD, Flexia Definition HM ESD, Flexia

Definition Blue and Flexia Definition HM Blue. Optilia Instruments AB is not responsible for any use

of this information for other purposes. Optilia Instruments AB shall not be liable to the purchaser of

this product or third parties for damages, losses, costs or expenses incurred by the purchaser or

third parties as result of: accident, misuses, or abuse of this product or unauthorized modifications,

repairs or alternations to this product, or failure to strictly comply with Optilia Instruments AB´s

operating and maintenance instructions

Optilia Instruments AB shall not be liable for any damages or problems arising from the use of any

options or any consumable products other than those designated as original Optilia products or

Optilia approved products by Optilia Instruments AB.

Optilia Instruments AB shall not be held liable for any damages resulting from from electromagnetic

interference that occurs from the use of any interface cables or devises other than those provided

by or designated as Optilia-approved Products by Optilia Instruments AB.

Djupdalsvägen 22

S-192 51, Sollentuna

Sweden

Phone: +46 (0)8 35 33 60

Fax: +46 (0)8 35 33 63

E-mail: Info@optilia.eu

Web: www.optilia.eu

Rev A, August 12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Optilia Mikroskop Handbücher

Optilia

Optilia W10x-HD Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung