Outback Cook Dome 701 Bedienungsanleitung
Assembly and Operating Instructions for
Outback® Cook Dome 701 and Cook Dome 702 Charcoal Barbecues
WARNING
x For outdoor use only. Not for commercial use.
x Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
x Warning: accessible parts may be very hot. Keep young children and pets away.
x CAUTION: Do not use spirit or petrol for lighting or re-lighting! Use only
firelighters complying to EN1860-3!
x Do not move the appliance during use.
x Any modification of the appliance, misuse, or failure to follow the instructions
may be dangerous and will invalidate your warranty. This does not affect your
statutory rights.
x Retain these instructions for future reference.
Photographs are not to scale.
Specifications subject to change
without prior notice.
Cook Dome 701 Cook Dome 702
2
A. Parts List
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram’.
CODE PART QTY Outback®
Cook Dome 701 Outback®
Cook Dome 702
HOOD A1 Hood 1
A2 Hood Handle 1
BODY
B1 Barbecue Body 1V V
B2 Cooking Grill 1
B3 Charcoal Grill 1
B4 Ash Tray 1V V
B5 Body Air Vent 1
B6 Body Ring 1
B7 Body Handle 1
B8 Tool Hook +1 3
B9 Ash Tray / Vent Tool 1
TROLLEY
C1 Short Leg 2
C2 Long Leg 1
C3 Leg Endcap 1
C4 Leg Support Rack 1
C5 Wheel 2
HARDWARE
D1 M6x10 Bolt +811
D2 Ø6 Washer +814
D4 Locknut 2
D3 M6 Nut +3
Pre-Assembled Component
+Quantity varies according to model purchased
VAppearance, size, and construction may differ according to model purchased
3
B1. Parts Diagrams: Cook Dome 701
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram.’
A1
A2
B6
B2
B3
B1
B7
B8
C2
C4
C5
C1
B4
B9
C3
4
B2. Hardware Reference Diagram: Cook Dome 701
Specifications subject to change without prior notice.
D1, D2
5
C1. Parts Diagrams: Cook Dome 702
Quantities vary according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see ‘Hardware Reference Diagram.’
A1
A2
B6
B2
B3
B1
C1
B7
B8
C2
C4
C5
B5
B4
B9
C3
6
C2. Hardware Reference Diagram: Cook Dome 702
Specifications subject to change without prior notice.
D1, D2
D1, D2, D3
7
D. Assembly
IMPORTANT!
x TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
x The assembly of this barbecue requires 2 people.
x Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
x Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach Barbecue Body (B1) onto Body Air Vent (B5) by inserting M6x10 Bolts (D1) through the Ø6
Washers (D2), body air vent, barbecue body, Ø6 Washers again and secure with M6 Nuts (D3) .
Note: Please read the step 2 assembly instruction before fixing barbecue body to body air vent.
Place Long Leg (C2) into position as shown.
Insert Short Legs (C1) into remaining 2 leg supports.
Note: The two leg supports that are closer together accommodate the short legs. The long leg
support is located on the side near the Body Handle (B7).
B5
B1
Cook Dome 701
Cook Dome 702
Cook Dome 701
Cook Dome 702
Cook Dome 701 users, skip this step and proceed directly to step 2.
C2
8
3
4
Secure the Short and Long Legs (C1, C2) to the leg supports by inserting M6x10 Bolts (D1)
through Ø6 Washers (D2) and screwing into leg supports.
Unscrew the Locknuts (D4) from the Leg Support Rack (C4). Thread the straight ends of the leg
support rack through the holes in the short legs and insert the securing end of the leg support rack into
the hole in the end of the left leg, as shown.
Cook Dome 701
Cook Dome 702
Cook Dome 701
Cook Dome 702
9
5
6
Slide the Wheels (C5) over each straight bar of the leg support. Secure the wheels into place
with the locknuts.
Carefully turn the completed trolley over, right side up.
Hang the Tool Hook/s (B8) over Body Handle (B7).
Attach the body handle onto the barbecue body by inserting M6x10 Bolts (D1) through Ø6
Washers (D2), barbecue body and screwing into body handle.
Cook Dome 701
Cook Dome 702
Cook Dome 701
Cook Dome 702
10
7
8
Place the Charcoal Grill (B3) onto the lower brackets in barbecue body. Ensure the charcoal
grill lies level within the body.
Place the Cooking Grill (B2) onto the upper brackets in barbecue body. Ensure the cooking grill
lies level within the body.
Cook Dome 701
Cook Dome 702
Cook Dome 701
Cook Dome 702
Place the Body Ring (B6) onto barbecue body as show.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Outback Grill Handbücher
Outback
Outback TPA101-2 Kurzanleitung
Outback
Outback Omega 150 Bedienungsanleitung
Outback
Outback Spectrum 2 Burner Bedienungsanleitung
Outback
Outback Spectrum 2 Burner Bedienungsanleitung
Outback
Outback MS4464 Bedienungsanleitung
Outback
Outback Omega 150 Bedienungsanleitung
Outback
Outback Spectrum TRG3301P Bedienungsanleitung
Outback
Outback Party FS5680 Bedienungsanleitung
Outback
Outback THG3710SS-3 Bedienungsanleitung
Outback
Outback Trekker RG47B Bedienungsanleitung
Outback
Outback Roast Box 500 Bedienungsanleitung
Outback
Outback Omega 200 Bedienungsanleitung
Outback
Outback Meteor 3 Bedienungsanleitung
Outback
Outback Sapphire 2 Burner Bedienungsanleitung
Outback
Outback Omega 250 Bedienungsanleitung
Outback
Outback CK578T Bedienungsanleitung
Outback
Outback Meteor 4 Bedienungsanleitung
Outback
Outback Party FS5680A Bedienungsanleitung
Outback
Outback Excel 100 Bedienungsanleitung
Outback
Outback Professional Range Pro 6 Bedienungsanleitung
