Outback PX-H4460 Bedienungsanleitung
Assembly and Operating Instructions for Outback®
Phoenix 4 Burner Black and Phoenix 6 Burner Black Gas Barbecues
EN (Europe)
WARNING
For outdoor use only. Not for commercial use.
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
Warning: accessible parts may be very hot. Keep young children and pets away.
Do not move the appliance during use.
Turn off the gas supply at the gas bottle after use.
Any modification of the appliance, misuse, or failure to follow the instructions
may be dangerous and will invalidate your warranty. This does not affect your
statutory rights.
Retain these instructions for future reference.
Leak test annually, and whenever the gas bottle is removed or replaced. Check
that the hose connections are tight and leak test each time you reconnect the gas
bottle.
For Flare-up control please refer to the ‘OPERATION’ section of this manual.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open barbecue lid or hood.
4. If odour continues, discontinue use and
contact your local dealer.
FOR YOUR SAFETY
1. Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2. A gas bottle not connected for use must not be
stored in the vicinity of this or any other
appliance.
0359
Photographs are not to scale.
Specifications subject to
change without prior notice.
PX-H4460 PX-H5660
2
CODE PART QTY Outback® Phoenix 4
Burner Black
Outback® Phoenix 6
Burner Black
HOOD
A1 Hood (Pre-Assembled to Body) 1
A2 Hood Handle 1
A3 Heat Indicator and Nuts 1
A4 Warming Rack 1
BODY
B1 Barbecue Body 1
B2 Burner 4 6
B3 Control Panel 1
B4 Knob 4 6
B5 Hose (if supplied)
B6 Flame Tamer 2 3
B7 Cooking Grill 11
B8 Cooking Griddle 11
B9 Drip Tray Left Bracket 1
B10 Drip Tray Right Bracket 1
B11 Drip Tray Handle 1
B12 Drip Tray 1
B13 Ignition Button 1
TROLLEY
C1 Side Burner Shelf 1
C2 Side Burner Grid 1
C3 Right Side Shelf 1
C4 Left Front Leg 1
C5 Left Rear Leg 1
C6 Right Front Leg 1
C7 Right Rear Leg 1
C8 Upper Body Support 1
C9 Side Panel 3
C10 Side Panel (with hole) 1
C11 Left Door 1
C12 Right Door 1
C13 Door Handle 2
C14 Basket 1
C15 Back Panel 1
C16 Bottom Panel 1
C17 Caster 2
C18 Lockable Caster 2
C19 Electronic Ignition Assembly 1
C20 Heat Shield 1
HARDWARE
D1 ST4.0x10 Screw 35
D2 M4x10 Bolt 4
D3 M6x15 Bolt 12
D4 M6x40 Bolt 16
D5 M6 Nut 8
Pre-Assembled Component
Quantity varies according to model purchased
Appearance, size, and construction may differ according to model purchased
1. Parts List
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
3
2.1. Parts Diagram: 4 Burner
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
A1
A3
A2
A4
B1
B2
B3
B4
B5
B6
B9 B10
B11
B12
C1 C3
C4
C5 C7
C6
C8
C9
C10
C11 C12
C13
C14
C15
C19 C20
B13
C16
C17
C18
B7 B8
C2
4
2.2. Parts Diagram: 6 Burner
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
A1
A3
A2
A4
B1
B2
B3
B4
B5
B6
B7
B9 B10
B11
B12
C1 C3
C2
B8
B13
C4
C5 C7
C6
C8
C9
C10
C11 C12
C13
C14
C15
C19 C20
C16
C17
C18
5
3. Hardware Reference Diagram
Specifications subject to change without prior notice.
CODE PART ILLUSTRATION QTY
D4 M6x40
Bolt 16
D5 M6 Nut
8
CODE PART ILLUSTRATION QTY
D1 ST4.0x10
Screw
35
D2 M4x10
Bolt
4
D3 M6x15
Bolt
12
6
4. Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
The assembly of this barbecue requires 2 people.
Remove all cooking components, flame tamer and any internal packaging from the Barbecue Body.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach the Legs (C4, C5, C6, C7) to the Side Panels (C9, C10) using ST4.0x10 Screws (D1) as
shown.
Attach the left / right cabinet panel assembly to the Bottom Panel (C16) using ST4.0x10
Screws (D1), M6x40 Bolts (D4) and M6 Nuts (D5) as shown.
Left Cabinet Panel Assembly Right Cabinet Panel Assembly
ST4.0x10 Screw
M6x40 Bolt and M6 Nut
Phoenix 4B Phoenix 6B
Phoenix 4B Phoenix 6B
7
4
3
Attach the Back Panel (C15) to the assembled portion of the cabinet using the ST4.0x10 Screws
(D1).
Attach the Upper Body Support (C8) to the front legs using M6x15 Bolts (D3).
Phoenix 4B Phoenix 6B
Phoenix 4B Phoenix 6B
8
Carefully turn the cabinet upside-down.
Attach the Casters (C17) into the rear legs and the Lockable Casters (C18) into the Front legs.
Carefully turn the completed cabinet over, right side up.
Carefully place the Barbecue Body (B1) onto the cabinet structure and fix using M6x40 Bolts (D4) as
shown.
WARNING: DO NOT RELEASE THE BARBECUE BODY WHILE THE BARBECUE HAS NOT BEEN
PROPERLY SEATED. THIS MAY RESULT IN INJURY OR DAMAGE TO YOUR BARBECUE.
CAUTION! Care must be taken to ensure the hood or lid does not fall open unexpectedly or
becomes damaged when it is set on the ground.
Phoenix 4B Phoenix 6B
Phoenix 4B Phoenix 6B
6
5
9
Attach the Right Side Shelf (C3) to the barbecue body using M4x10 Bolts (D2) and M6x15 Bolts
(D3) as shown.
Connect the gas hose to the barbecue.
Ensure the mating faces of the connection are clean and not damaged. Do not use any
sealing tape, paste, or liquid on the connection. The nut must be tightened with the use of
a spanner. Do not use force which may damage the assembly.
Phoenix 4B Phoenix 6B
Phoenix 4B Phoenix 6B
8
7
D2
D3
10
Attach the Side Burner Shelf (C1) to the barbecue body using M4x10 Bolts (D2) and M6x15 Bolts
(D3), making sure that the side burner shelf is fixed onto the left side of the body.
Phoenix 4B Phoenix 6B
Phoenix 4B Phoenix 6B
10
9
D2
D3
Connect the gas hose to the Side Burner Shelf (C1) as shown.
Ensure the mating faces of the connection are clean and not damaged. Do not use any
sealing tape, paste, or liquid on the connection. The nut must be tightened with the use
of a spanner. Do not use force which may damage the assembly.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Outback Grill Handbücher
Outback
Outback Meteor Select 3 Burner Gas BBQ MH3330 Bedienungsanleitung
Outback
Outback Excel 100 Bedienungsanleitung
Outback
Outback Jupiter 4S Bedienungsanleitung
Outback
Outback Mayfair Bedienungsanleitung
Outback
Outback Spectrum THG2302PA Bedienungsanleitung
Outback
Outback MS4464 Bedienungsanleitung
Outback
Outback Omega 201 Bedienungsanleitung
Outback
Outback Excel 100 Bedienungsanleitung
Outback
Outback Excel Onyx 2 Bedienungsanleitung
Outback
Outback Meteor MT-H4430-3 Bedienungsanleitung
Outback
Outback Society/Granite Bedienungsanleitung
Outback
Outback NEW Apollo 4 Bedienungsanleitung
Outback
Outback THG2302-3 Bedienungsanleitung
Outback
Outback RC4341PA Bedienungsanleitung
Outback
Outback Gourmet 4 Bedienungsanleitung
Outback
Outback Excel 100T Bedienungsanleitung
Outback
Outback Trooper THG2302A Bedienungsanleitung
Outback
Outback Meteor MT-H4430-3 Bedienungsanleitung
Outback
Outback Spectrum Select Flat Bed 2 Bedienungsanleitung
Outback
Outback GD4222S-S Bedienungsanleitung
