Panasonic CZ-64ESMC2 Bedienungsanleitung

Save These Instructions

Conserver ce mode d’emploi

Bewahren Sie bitte diese

Bedienungsanleitung auf.

Conservate queste istruzioni

Guarde estas instruções

   

Guarde estas instrucciones

  

  

CZ-64ESMC2

Panasonic Corporation

85464609077012

System Controller for Split System Air

Conditioner

INSTRUCTION MANUAL

•

Contrôleur de système pour climatiseur d’air

à deux blocs

MODE D’EMPLOI

•

Systemsteuerung Split-Klimagerät BEDIENUNGSANLEITUNG

•

Controllore di sistema per condizionatore

d’aria a sistema Split

ISTRUZIONI PER L’USO

•

Controlador do sistema de ar condicionado

com sistema distribuído

MANUAL DE INSTRUÇÕES

•

    

   

ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓιΩΝ

•

Controlador de sistema para acondicionador

de aire tipo separado

MANUAL DE INSTRUCCIONES

•

   

- 

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

•

   

  

ПОСІБНИК КОРИСТУВАЧА

•

CZ-64ESMC2all.indb1CZ-64ESMC2all.indb1 2011/09/0714:37:462011/09/0714:37:46

Contents

Product Information .............................................................................................2

Alert Symbols ......................................................................................................2

Installation Location.............................................................................................3

Electrical Requirements.......................................................................................3

Safety Instructions...............................................................................................3

How to Use the System Controller ......................................................................4

Functions of buttons

................................................................................4

Display

.....................................................................................................7

How to start group operation

...................................................................8

How to start collective operation

.............................................................9

Product Information

If you have problems or questions concerning your Air Conditioner, you will

need the following information. Model and serial numbers are on the nameplate

on the bottom of the cabinet.

Model No. CZ-64ESMC2 Serial No.

Date of purchase

Dealer’s address

Phone number

Alert Symbols

The following symbols used in this manual, alert you to potentially

dangerous conditions to users, service personnel or the appliance:

WARNING This symbol refers to a hazard or unsafe

practice which can result in severe personal

injury or death.

CAUTION This symbol refers to a hazard or unsafe

practice which can result in personal injury

or product or property damage.

page

CZ-64ESMC2all.indb2CZ-64ESMC2all.indb2 2011/09/0714:37:462011/09/0714:37:46

Installation Location

We recommend that this system controller be installed properly by•

qualiﬁ ed installation technicians in accordance with the Installation

Instructions provided with the system controller.

WARNING Do not install this system controller where there are fumes or•

ﬂammable gases, or in an extremely humid space such as a

greenhouse.

Do not install the system controller where excessively high•

heatgenerating objects are placed.

Electrical Requirements

All wiring must conform to the local electrical codes. Consult your dealer or a1.

qualiﬁed electrician for details.

Wiring must be done by a qualiﬁed electrician.2.

CAUTION To warm up the system, the power mains must

be turned on at least ﬁve (5) hours before

operation. Leave the power mains ON unless

you will not be using this appliance for an

extended period.

Safety Instructions

Read this Instruction Manual carefully before using this system•

controller. If you still have any difﬁculties or problems, consult your

dealer for help.

The air conditioner is designed to give you comfortable room•

conditions. Use this only for its intended purpose as described in the

Instruction Manual.

WARNING Never touch the unit with wet hands.•

Never use or store gasoline or other ﬂammable vapor or liquid near•

the air conditioner — it is very dangerous.

The air conditioner has no ventilator for intaking fresh air from•

outdoors.You must open doors or windows frequently when you

use gas or oil heating appliances in the same room, which consume

a lot of oxygen from the air. Otherwise there is a risk of suffocation

in an extreme case.

CAUTION Do not turn the air conditioner on and off from the power mains•

switch. Use the ON/OFF operation button.

Do not stick anything into the air outlet of the outdoor unit.This is•

dangerous because the fan is rotating at high speed.

Do not let children play with the air conditioner.•

Do not cool or heat the room too much if babies or invalids are•

present.

CZ-64ESMC2all.indb3CZ-64ESMC2all.indb3 2011/09/0714:37:462011/09/0714:37:46

How to Use the System Controller

Functions of buttons



A: ALL/ZONE/GR

SELECT button

B: ZONE select

button

C: GROUP select

button

F: Operation

lamp

D: ON button

E: OFF button

I: FAN SPEED button

J: FLAP button

M: SET button

N: CL button

K: CHECK

button

O: VENTILATION

button L: CENTRAL CTRL button

G: MODE

button

H:Temperature

setting

buttons

A: ALL/ZONE/GR SELECT button

NOTE

Use this button to select one of the following:

ALL: Used for turning all the air conditioners on and off.

ZONE: Used for turning all the air conditioners of each zone on and

off.

GROUP: Used for turning all the air conditioners of each group on and

(GR) off.

A maximum of four zones and 16 groups (units) in a zone can be

set.

B: ZONE select button Use this button to select a zone (1 to 4) to operate individually.

C: GROUP select buttons Use these buttons to select a group (1 to 16) to operate individually.

CZ-64ESMC2all.indb4CZ-64ESMC2all.indb4 2011/09/0714:37:462011/09/0714:37:46

Functions of buttons (Continued)



D: ON button This button is for turning the selected air conditioner on.

E: OFF button This button is for turning the selected air conditioner off.

F: Operation lamp This lamp lights when the unit is turned on.

G: MODE button

(AUTO)

(HEAT)

(DRY)

(COOL)

(FAN)

NOTE

Use this button to select one of the following ﬁve operations:

: Used to automatically set cooling or heating operation.

Only for heat pump type

(temperature range: 17 to 27 °C)

: Used for normal heating operation.

Only for heat pump type

(temperature range: 16 to 26 °C)

: Used for dehumidifying without changing the room temperature.

(temperature range: 18 to 30 °C)

: Used for normal cooling operation.

(temperature range: 18 to 30 °C)

: Used to run the fan only, without heating or cooling operation.

When the indication is displayed, you cannot change the mode

from and or to or and . To change the mode, turn off all

units once then select the mode again.

H:Temperature setting

buttons

: Press this button to increase the temperature setting.

: Press this button to decrease the temperature setting.

I: FAN SPEED button

(AUTO)

(HI.)

(MED.)

(LO.)

: The air conditioner automatically decides the fan speed.

: High fan speed.

: Medium fan speed.

: Low fan speed.

J: FLAP button

NOTE

1. Use this button to set the airﬂow direction to a speciﬁc angle. The

airﬂow direction is displayed on the remote control unit.

Operation mode Number of airﬂow direction settings

(COOL) or (DRY) 3

(HEAT) or (FAN) 5

(AUTO)

Cooling mode: 3

Heating mode: 5

• In the cool mode and dry mode, when the ﬂaps are set in a

downward position, condensation may form and drip around

the vent.

• Do not move the ﬂap with your hands.

This function is available only for models U1 and T1.

( )

NOTE

2. Use this button to make the airﬂow direction sweep up and down

automatically.

Press this button several times until the ( ) symbol appears on

the display.

This function is available only for models U1, K1 and T1.

NOTE 1) The ﬂap setting can be performed only for units that have no remote

controllers.

2) In the ALL or ZONE mode, no ﬂap setting can be performed. If

necessary, you should select the GROUP mode and use the FLAP

button.

CZ-64ESMC2all.indb5CZ-64ESMC2all.indb5 2011/09/0714:37:462011/09/0714:37:46

Functions of buttons (Continued)



K: CHECK button This button is used only when servicing the air conditioner.

Do not use the CHECK button for normal operation.

L: CENTRAL CTRL button Use this button to inhibit individual operation by remote controller as

follows:

1: Individual ON/OFF operation is inhibited.

2: Individual ON/OFF, MODE and Temperature setting operation is

inhibited.

3: Individual MODE and Temperature setting operation is inhibited.

4: Individual MODE operation is inhibited.

No indication: Central control is cleared. (Individual operation)

M: SET button

NOTE

This button is used for setting indoor unit's address when installing the

air conditioner.

Do not use the SET button for normal operation.

N: CL button Use this button to reset the ﬁlter sign .

The air conditioner has the timer for the ﬁlter and informs you when the

ﬁlter needs cleaning.

O: VENTILATION button Use this button when you installed a fan available in the market.

Pressing this button turns on and off the fan.

When turning off the air conditioner, the fan will also turned off. While

the fan is operating, will appear in the display.

If is displayed when pressing the ventilation button, no fans are

installed.

CZ-64ESMC2all.indb6CZ-64ESMC2all.indb6 2011/09/0714:37:492011/09/0714:37:49

Display



Description

A: When the unit is in the heating standby mode, the indicator appears.

B: The currently selected operation mode is displayed.

C: The currently selected FAN SPEED, Airﬂow Direction and SWEEP settings are displayed.

D: This indication appears when the ﬁlter needs cleaning.

E: This indication appears only when an abnormality occurs within a unit.

F: The currently selected mode (ALL, ZONE or GROUP), ZONE number and GROUP number are

displayed.

GROUP number display (no ﬁgure: no number registered)

GROUP state display ( [ ] registered group, currently selected group)

Operation state display ( on, no sign: off, alarm)

G: The currently selected central control mode (1, 2, 3 or 4) is displayed.

H: Lights when any of the air conditioners under the system control is operating; turns off when

none of the air conditioners under the system control is operating. Blinks when any conditioner is

operating under abnormal conditions and its protection functionality is working.

I: When the button is pressed for more than four seconds, the TEST indicator appears.

J: This indication appears when the temperature is set.

K: When turning on the power switch of the system controller. sign blinks for a few minutes.

While blinking, any controls using the system controller are inhibited. This is because the system

controller is verifying connected groups.

L: Appears during the peak cut mode (Demand) if an electric heat pump (EHP) air conditioner is

used or during standby if a gas heat pump (GHP) air conditioner is used.

CZ-64ESMC2all.indb7CZ-64ESMC2all.indb7 2011/09/0714:37:492011/09/0714:37:49

How to start group operation



To start group operation

Stop

Power Turn the power supply switch on more than 5 hours before starting operation.

1 Press the SELECT button and select GROUP.

2 Select the ZONE No. including the group to be operated by pressing ZONE button.

3 Select the GROUP No. to be operated by pressing GROUP select buttons .

4 Press the ON button.

5 Set the operation mode by pressing the MODE button.

6 Set the desired temperature by pressing one of the temperature setting buttons .

7 Set the desired fan speed by pressing the FAN SPEED button.

8 Set the airﬂow direction to a speciﬁc angle or sweep mode.

9 By pressing , select your desired setting.

Individual: Controls with the remote controller are possible.

Central 1: Individual ON/OFF operation with the remote controller is inhibited.

Central 2: Individual ON/OFF, MODE, and Temp, setting operations with the remote

controller are inhibited.

Central 3: Individual MODE and Temp, setting operations with the remote controller are

inhibited.

Central 4: Individual MODE operation with the remote controller is inhibited.

• Under Central/Individual settings other than listed above, “CENTRAL” is displayed.

Stop Conﬁrming the GROUP No. to be selected, press the OFF button.

• The ﬂap setting can be performed only for units that have no remote controllers.

• AUTO Depending on the difference between the temperature setting and

Operation: the room temperature, heating and cooling alternate automatically so that a

uniform room temperature is maintained.

NOTE

CZ-64ESMC2all.indb8CZ-64ESMC2all.indb8 2011/09/0714:37:502011/09/0714:37:50

How to start collective operation



To start collective operation (ALL or ZONE)

Stop

Power Turn the power supply switch on 5 hours or more before starting operation.

1 Press the SELECT button and select ALL or ZONE.

In case of ZONE collective operation.

2 Select the ZONE No. to be operated by pressing ZONE button.

3 Press the ON button.

4 Set the operation mode by pressing the MODE button.

5 Set the desired temperature by pressing one of the temperature setting buttons .

6 Set the desired fan speed by pressing the FAN SPEED button.

7 Select the control mode.

Stop Conﬁrming the ZONE No. to be selected or ALL indication, press the OFF button.

In the ALL or ZONE mode, no ﬂap setting can be performed. If necessary, you should select

the GROUP mode and use the FLAP button.

NOTE

CZ-64ESMC2all.indb9CZ-64ESMC2all.indb9 2011/09/0714:37:502011/09/0714:37:50

Table des matières

Informations sur le produit.................................................................................10

Symboles d’avertissement................................................................................. 10

Emplacement d’installation................................................................................11

Instructions relatives à l’alimentation.................................................................11

Conseils de sécurité ..........................................................................................11

Comment utiliser le contrôleur de système .......................................................12

Fonctions des boutons

..........................................................................12

Afﬁchage

...............................................................................................15

Comment lancer le fonctionnement d’un groupe

...................................16

Comment démarrer le fonctionnement collectif

.....................................17

Informations sur le produit

Pour tout problème ou toute question relatifs au climatiseur d’air, il faudra les

informations ci-dessous. Les numéros de série et de modèle ﬁgurent sur la

plaque signalétique placée sur le fond du coffret.

N° modèle CZ-64ESMC2 N° série

Date d’achat

Adresse du concessionnaire

Numéro de téléphone

Symboles d’avertissement

Les symboles suivants utilisés dans ce manuel avertissent d’un danger

potentiel pour l’utilisateur, le personnel d’entretien ou l’appareil :

Ce symbole signale un danger ou des

opérations dangereuses qui risquent

d’entraîner des blessures physiques graves,

ou mortelles.

Ce symbole signale un danger ou des

opérations dangereuses qui risquent

d’entraîner des blessures physiques ou des

dommages matériels, notamment de

l’appareil.

Page

CZ-64ESMC2all.indb10CZ-64ESMC2all.indb10 2011/09/0714:37:512011/09/0714:37:51

Andere Handbücher für CZ-64ESMC2

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Controller Handbücher

Panasonic

Panasonic CZ-RD516C-1 Bedienungsanleitung

Panasonic

Panasonic AWRP605P - MULTI FUNCTION CONTROLLER Bedienungsanleitung

Panasonic

Panasonic FP-X0 L14R Bedienungsanleitung

Panasonic

Panasonic AW-RP60GJS Bedienungsanleitung

Panasonic

Panasonic FP3 Bedienungsanleitung

Panasonic

Panasonic AAD03011 Bedienungsanleitung

Panasonic

Panasonic CZ-256ESMC2 Bedienungsanleitung

Panasonic

Panasonic FP7 Series Bedienungsanleitung

Panasonic

Panasonic KT4R Gebrauchs- und Pflegehandbuch

Panasonic

Panasonic CZ-256ESMC3 Gebrauchsanweisung

Panasonic

Panasonic AWLK30 - LENS CONTROLLER Bedienungsanleitung

Panasonic

Panasonic FP Series Bedienungsanleitung

Panasonic

Panasonic CZ-RD517C Bedienungsanleitung

Panasonic

Panasonic WV-CU980/G Bedienungsanleitung

Panasonic

Panasonic MEWNET-F Bedienungsanleitung

Panasonic

Panasonic AW-RP120G Bedienungsanleitung

Panasonic

Panasonic AFP7PSA1 Bedienungsanleitung

Panasonic

Panasonic FP7 Series Bedienungsanleitung

Panasonic

Panasonic SFB-HC Bedienungsanleitung

Panasonic

Panasonic AKHRP900P - CAMERA CONTROLLER HC Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Panasonic

Panasonic CZ-64ESMC3 Bedienungsanleitung

Panasonic

Panasonic AF7CPS Series Bedienungsanleitung

Panasonic

Panasonic FP2 -C1A Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung