Panasonic KX-HDV100 Service-Handbuch

Document Version 2016-08

Model No.

SIP Phone

KX-HDV100

Supplement for Administrator Guide

Please use this supplement manual together

with the latest English Administrator Guide.

1. Additional Information for Specifying the Server Address

1.1 Basic format

Format: <scheme>://<user>:<password>@<host>:<port>/<url-path>/<file name>

　　* The server name (<host>) may be the IP address or the domain.

　　* Maximum length: 384 characters

1.2 Macros used with file names

Macro Format {XXXX} Macro Expansion

{MAC}

If the URL contains {MAC}, it will be replaced with the

device’s MAC address in uppercase letters.

Example: {MAC} → 0080F0C571EB

{mac}

If the URL contains {mac}, it will be replaced with the

device’s MAC address in lowercase letters.

Example: {mac} → 0080f0c571eb

{MODEL}

If the URL contains {MODEL}, it will be replaced with

the device’s model name.

Example: {MODEL} → KX-HDV100

{fwver}

If the URL contains {fwver}, it will be replaced with the

device’s firmware version.

Example: {fwver} → 01.000

Note

• Macros distinguish between uppercase and lowercase letters.

• Macros not specified above will be treated as strings of characters.

1.3 Target WEB Settings/Configuration Parameters

WEB Setting Configuration Parameter

DHCP Host Name DHCP_HOST_NAME

Standard File URL CFG_STANDARD_FILE_PATH

Product File URL CFG_PRODUCT_FILE_PATH

Master File URL CFG_MASTER_FILE_PATH

- CFG_ROOT_CERTIFICATE_PATH

- CFG_CLIENT_CERT_PATH

- CFG_PKEY_PATH

Firmware File URL FIRM_FILE_PATH

HTTP User Agent HTTP_USER_AGENT

-LDAP_ROOT_CERT_PATH

-LDAP_CLIENT_CERT_PATH

-LDAP_PKEY_PATH

-LANGUAGE_PATHx

-WEB_LANGUAGE_PATHx

User Agent SIP_USER_AGENT

-SIP_TLS_ROOT_CERT_PATH

-SIP_TLS_CLIENT_CERT_PATH

-SIP_TLS_PKEY_PATH

-POWER_ON_DISPLAY_LOGO_PATH

2. Additional Information for Specifying the LDAP Server

Add "ldap://"or "ldaps://" before the LDAP server address.

(Example) LDAP_SERVER="ldap://141.170.10.178"

KX‐HDV100SoftwareFileVersion02.040orlater

1. 4.5.4 VoIP Settings [Line 1]

Change the followings in "SRTP Mode" on page 117

(Before)

Value Range

(After)

Value Range

2. 5.3.23 SRTP Settings

Change the followings in "SRTP_CONNECT_MODE_n" on page 235

(Before)

Value Range

(After)

Value Range

3. 5.3.28 Call Control Settings

Add the following configuration parameter.

VM_SUBSCRIBE_SPECIFIC_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

Add the following configuration parameter.

SHARED_STOP_LINE_SEIZE

Value Format

Description

Value Range

Default Value N

• SRTP

• RTP/SRTP

Note

• RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming

calls.

VM_SUBSCRIBE_SPECIFIC_1

• SRTP

• RTP/SRTP

Note

• When RTP/SRTP is selected, operation is in RTP mode.

• 0: SRTP

• 1: RTP/SRTP

Note

• When RTP/SRTP is selected, operation is in RTP mode.

• 0: SRTP

• 1: RTP/SRTP

Note

• 0: Use only SRTP for outgoing and incoming calls.

• 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.

BOOLEAN

Specifies whether to stop seizing the line of the Shared Call at the unit side or

not.

・Ｙ: Stop seizing line

・N: Seize line

STRING

Specifies the defined name of a voice mail box.

Max. 32 characters

Empty string

KX‐HDV100SoftwareFileVersion02.067orlater

1. 5.3.1 System Settings

Add the following configuration parameter.

FWD_DND_MENU_ENABLE

Value Format

Description

Value Range

Default Value

BLOCK_ANONY_MENU_ENABLE

Value Format

Description

Value Range

Default Value

ANONY_CALL_MENU_ENABLE

Value Format

Description

Value Range

Default Value

TIME_ZONE_SET_ENABLE

Value Format

Description

Value Range

Default Value

2. 5.3.17 NAT Settings

Add the following configuration parameter.

EXTERNAL_RTP_PORTx

Value Format

Description

Value Range

Default Value

BOOLEAN

Specifies whether the "Time Zone" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

INTEGER

x=1-3

Specifies the port number of the router in Static NAT status.

0, 1024–59998 (only even ports)

0: Disable

BOOLEAN

Specifies whether the "Fwd/DND" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

BOOLEAN

Specifies whether the "Anonymous Call" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

Specifies whether the "Block Anonymous" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

3. 5.3.18 SIP Settings

Add the following configuration parameter.

SIP_REPLACE_ENABLE_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

SIP_INC_INVITE_RTP_MODE_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

4. 5.3.19 SIP-TLS Settings

Add the following configuration parameter.

SIP_TLS_RANDOM_PORT

Value Format

Description

Value Range

Default Value

・0: Start receiving RTP after receiving a second INVITE

・1: Start sending/receiving RTP after receiving a second INVITE

SIP_INC_INVITE_RTP_MODE_1

SIP_REPLACE_ENABLE_1

BOOLEAN

Specifies whether to use "Replaces Header".

・Y: Use "Replaces Header"

・N: Do not use "Replaces Header"

Specifies whether to assign a random port (ephemeral port) number or a static

port number.

　Note

　　・All lines that use SIP-TLS are defined by this parameter.

　　・UDP/TCP ports are unaffected by this parameter.

・Y: Assign a random TLS port number

・N: Assign a static TLS port number (Refer to SIP_SRC_PORT_n)

INTEGER

Specifies whether to send RTP after receiving a second INVITE.

BOOLEAN

5. 5.3.24 VQ Report by PUBLISH

Add the following configuration parameter.

VQREPORT_SEND_OPT_CODEC_ENABLE

Value Format

Description

Value Range

Default Value

VQREPORT_SEND_OPT_NW_CHANGE

Value Format

Description

Value Range

Default Value

6. 5.3.25 Telephone Settings

Add the following configuration parameter.

CNIP_FROM_ENABLE

Value Format

Description

Value Range

Default Value

IDLE_DISPLAY_TYPE

Value Format

Description

Value Range

Default Value

・Y: Use 'FROM' header

・N: Use 'PAI' header

BOOLEAN

INTEGER

Specifies what is shown on the display in standby mode.

・0:Off

・1:Phone Number

・2:Phone Number&Name

・3:Name

　Note

　　　"Name" is the display name for the line.

INTEGER

Specifies the number of consecutive times the MOS (Mean Opinion Score) value

may fall below the threshold value specified by either

ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING

before the phone sends VQREPORT.

The ALERT_REPORT_TRIGGER setting determines whether

ALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING is

used as the threshold.

0–5

(The number of consecutive times. 0:Disable)

　Note

If "2" is specified and the MOS value falls within the threshold 2 consecutive

times, VQREPORT is sent.

Specifies whether to use the 'FROM' header or the 'PAI' header in CNIP (Calling

Number Identification Presentation).

BOOLEAN

Specifies whether to enable the sending of VQREPORT (SIP-PUBLISH) when

the codec is changed.

・Y: Send VQREPORT when a change of codec is detected

・N: Send VQREPORT at the end of a conversation

7. 5.3.28 Call Control Settings

Add the following configuration parameter.

FWD_SYNCHRO_FORCE_DISABLE_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

CONF_SERVER_HOLD_ENABLE

Value Format

Description

Value Range

Default Value

・Y: Hold the call

・N: Do not hold the call

BOOLEAN

Specifies whether to hold the call when connecting an N-party conference.

BOOLEAN

Specifies whether to synchronize the Call Forward settings in

FWD_DND_SYNCHRO_ENABLE_n.

・Y: Do not synchronize

・N: Synchronize

FWD_SYNCHRO_FORCE_DISABLE_1

KX‐HDV100SoftwareFileVersion02.100orlater

1. 4.2.2 Network Status

Change the followings in "Setting Mode" on page 71.

(Before)

Value Range

(After)

Value Range

2. 4.3.2 Ethernet Port Settings

Add the following WEB setting.

Enable CDP

Description

Value Range

Default Value

Configuration File Reference

Packet Interval

Description

Value Range

Default Value

Configuration File Reference

3. 4.6.1 Call Control

Add the following WEB setting.

Private Hold

Description

Value Range

Default Value

Configuration File Reference

• Disable

• LLDP

• Manual

• Disable

• LLDP

• CDP

• LLDP/CDP

• Manual

Selects whether to enable the CDP feature.

・Yes

・No

CDP_ENABLE

Specifies the interval, in seconds, between sending CDP frames.

1–3600

CDP_INTERVAL

Selects whether to enable or disable private hold.

・Yes

・No

PRIVATE_HOLD_ENABLE

4. 5.3.1 System Settings

Add the following configuration parameter.

CALL_SETTINGS_MENU_ENABLE

Value Format

Description

Value Range

Default Value

DELAY_RING_TIME_n

Parameter Name Example

Value Format

Description

Value Range

Default Value

OFF_HOOK_MONITOR_ENABLE

Value Format

Description

Value Range

Default Value

PRIVATE_HOLD_ENABLE

Value Format

Description

Value Range

Default Value

Web User Interface Reference

CONF_OWNER_OUT_ENABLE

Value Format

Description

Value Range

Default Value

DELAY_RING_TIME_1

INTEGER

Specifies the length of time, in seconds, until the unit rings.

0–30

0: Disable

BOOLEAN

Specifies whether to enable or disable the Off-hook Monitor function.

・Y: Enable Off-hook Monitor

・N: Disable

Ｙ

BOOLEAN

Private Hold

BOOLEAN

Specifies whether the "Call Settings" setting is displayed in MENU.

・Y: Displayed

・N: Not displayed

Specifies whether to enable or disable private hold.

・Y: Enable private hold

・N: Disable

BOOLEAN

Specifies whether to allow the remaining two parties in a three-party

conference to continue the conversation if the conference originator leaves the

conference call (Unattended Conference).

・Y: Enable Unattended Conference

・N: Disable

PCAP_ENABLE

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_ID

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_PASS

Value Format

Description

Value Range

Default Value

PCAP_REMOTE_PORT

Value Format

Description

Value Range

Default Value

DTMF_OUT_ENABLE

Value Format

Description

Value Range

Default Value

CANCEL_OPERATION_MODE

Value Format

Description

Value Range

Default Value

・Y: Enable PCAP Remote

・N: Disable

STRING

Specifies the ID of the IP phone whose packets will be captured using the

Wireshark utility (PCAP Remote).

1–16 characters

Empty string

STRING

Specifies the password of the IP phone whose packets will be captured using

the Wireshark utility (PCAP Remote).

0, 6–64 characters

BOOLEAN

Specifies whether received outband DTMF signals are output audibly.

・Y: Enable audible outband DTMF

・N: Disable

INTEGER

Specifies the operation of the [CANCEL] button.when a line is in use.

0: Cancel the current operation

1: Return to standby mode

Empty string

INTEGER

Specifies the port of the IP phone to use for capturing packets using the

Wireshark utility (PCAP Remote).

1–65535

2002

BOOLEAN

Specifies whether to enable or disable packet capturing using the Wireshark

utility (PCAP Remote).

Andere Handbücher für KX-HDV100

Inhaltsverzeichnis

Andere Panasonic IP-Telefon Handbücher

Panasonic

Panasonic KX-UT133-B Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Service-Handbuch

Panasonic

Panasonic NT346-B - KX - VoIP Phone Bedienungsanleitung

Panasonic

Panasonic KX-T7730 Bedienungsanleitung

Panasonic

Panasonic KX-TGW420 Bedienungsanleitung

Panasonic

Panasonic KX-NT136 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Handbuch

Panasonic

Panasonic KX-UT248 Bedienungsanleitung

Panasonic

Panasonic DBS 576 Section 300 Bedienungsanleitung

Panasonic

Panasonic KX-TCA275CE Bedienungsanleitung

Panasonic

Panasonic KX-NT543 Bedienungsanleitung

Panasonic

Panasonic KX-T7420 Bedienungsanleitung

Panasonic

Panasonic KX-UT248 Bedienungsanleitung

Panasonic

Panasonic KX-NS0154 Bedienungsanleitung

Panasonic

Panasonic KX-TGP500 Bedienungsanleitung

Panasonic

Panasonic KX-UT123 Handbuch

Panasonic

Panasonic KX-TGP700 Bedienungsanleitung

Panasonic

Panasonic VA-309UK Bedienungsanleitung

Panasonic

Panasonic KX-TDE100 Bedienungsanleitung

Panasonic

Panasonic KX-TD7590CE Bedienungsanleitung

Panasonic

Panasonic KX-TGP600 Bedienungsanleitung

Panasonic

Panasonic Section 700 Bedienungsanleitung

Panasonic

Panasonic KX-TDA30 Bedienungsanleitung

Panasonic

Panasonic KX-HDV230C Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung