PEERLESS Vision-Point LCV 100 Leitfaden

ISSUED: 11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 4

Model

LCV 100

Part # QTY. DESCRIPTION

A090-7008 1 LCD mount assembly

095-8070 hardware pack

AA 1 4" set screw

CC 1 washer

DD 1 nylock nut

FF 1 1/4" allen wrench

GG 1 3/16" allen wrench

B095-4354 1 adapter plate

C504-2013 4 M4 x .7 x 12 mm phillips screw

D 504-2014 4 M4 x .7 x 20 mm phillips screw

E590-5003 4 .198 x .313 x .437 H retaining spacer

F 520-2175 2 1/4-20 x .5 phillips screw

IMPORTANT! Read entire instruction sheet before you start assembly and installation.

Model: LCV 100

PART LIST

Installation &Assembly - Vision•Point™ Vertical Desktop Mount with Stationary

Base & Vision•Point™ Vertical Desktop Mount with Swivel Base

LCV 100

Thread set screw (AA) into the hole on the bottom of LCD assembly (A) using 3/16" allen wrench (GG) as shown.

LCV 100

Bottom View

Note: Compare screws to full

scale drawings to make sure you

are using the correct screw.

Note: You may not need all hardware provided

Important: The product is made to support screens with a VESA®compliant hole pattern. For safe mounting, mount-

ing screws must turn at least three times in the screen inserts.

• The LCV 100 can be mounted to most wood and/or wood composite surfaces up to 1.5" thick. Before installation, the

installer MUST ensure that the mounting surface will safely hold the combined weight of the mount and the screen.

The surface must be at least 3/4" thick.

CAUTION

ISSUED:11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 4

Drill a 1/2" hole in the desired location of the desktop. Drop set screw (AA) for LCV 100 through the hole (placing

1" base over the hole for LCV 100 model. Fasten LCD assembly with washer (CC) and lock nut (DD) as shown.

1" base

FIGURE 1

Attach adapter plate (B) to LCV 100 (A) using 2 1/4-20 x .5 phillips screws (F) as shown.

ISSUED: 11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

3 of 4

hex head screw

Attach mount assembly (A) to monitor using four M4 x 12 mm screws (C) in either the 75 MM or

the 100 MM hole pattern as shown. If necessary use four M4 x 20mm screws (D) and retaining

spacers(E)providedwithadapterplate.

FOR INSTALLING TO VESA 75 MM, 100 MM

Forinstallingthemounting plate to theLCDmonitor,readthe following references:

For installing to VESA 75 mm and VESA 100 mm, see below.

For installing to existing Peerless®adapter plate, go to page 4.

In order to be able to safely place the monitor onto the mount, you must first tilt the upright backward about

5°asindicatedbelow:

For the LCV 100 model, loosen the hex head screws using allen wrench (FF), tilt the upright 5° and tighten

the hex head screws.

Other tilt adjustments will be done later.

GENERIC LCD SCREEN

ISSUED:11-7-02 SHEET #: 090-9066-5 07-28-05

Visit the Peerless Web Site at www.peerlessmounts.com For customer service call 1-800-729-0307 or 708-865-8870.

4 of 4

To adjust upright in a backward tilt position: Hold the screen with one hand, and loosen the hex head screws with

allen wrench (FF).Moveuprightin the desired backward tilt position and tightenhexheadscrews.

To adjust upright in a forward tilt position: hold screen with one hand, and loosen the hex head screws with allen

wrench (FF). Place upright in the desired forward tilt position and tighten hex head screws.

If the upright keeps moving forward use allen wrench (FF) and tighten the hex head screws at the bottom

of the assembly as shown below.

hex head screw

FOR INSTALLING TO EXISTING PEERLESS ADAPTER PLATE

Note: Refertoadapter bracket instruction sheetforattachmentof adapterbracketto monitor.

Attach interface plate (B)toexistingadapter plate using four M5 x 6 mm screws providedwithadapterplateas shown to

theright.

IMPORTANT! Hole on bottom denotes bottom of adapter plate as shown in detail 2.

GENERICADAPTER

PLATE

GENERIC LCD SCREEN

M5 X 6 MM SCREWS

(PROVIDEDWITH

ADAPTERPLATE)

DETAIL 2

TOP

BOTTOM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PEERLESS Rack & Stand Handbücher

PEERLESS

PEERLESS IBA1 Leitfaden

PEERLESS

PEERLESS LDS 1920U Leitfaden

PEERLESS

PEERLESS HDS-S Leitfaden

PEERLESS

PEERLESS HL4UN-002 Leitfaden

PEERLESS

PEERLESS Perfect Mount PMF2X2 Bedienungsanleitung

PEERLESS

PEERLESS Smartmount ST670 Leitfaden

PEERLESS

PEERLESS Smartmount SA752PU Leitfaden

PEERLESS

PEERLESS SmartMount SP850-UNL Leitfaden

PEERLESS

PEERLESS IM760P Leitfaden

PEERLESS

PEERLESS Smartmount D-FPF-220 Leitfaden

PEERLESS

PEERLESS PJF2-UNV Leitfaden

PEERLESS

PEERLESS WSP 490 Leitfaden

PEERLESS

PEERLESS PARAMOUNT PA730 Leitfaden

PEERLESS

PEERLESS WSP820 Leitfaden

PEERLESS

PEERLESS SR1G Leitfaden

PEERLESS

PEERLESS ACC517 Leitfaden

PEERLESS

PEERLESS SF 24D Leitfaden

PEERLESS

PEERLESS HCACC503 Bedienungsanleitung

PEERLESS

PEERLESS MSA-301 Leitfaden

PEERLESS

PEERLESS DS-VW650 Leitfaden

PEERLESS

PEERLESS FPZ-655 Leitfaden

PEERLESS

PEERLESS SmartMount SP740P Leitfaden

PEERLESS

PEERLESS VPM 25-J Leitfaden

PEERLESS

PEERLESS HCW201 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung