Philips FC8700/01 Bedienungsanleitung

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification

ServiceManual

Philips Consumer Lifestyle

SmartPro Compact Robot vacuum cleaner

FC8700/01

FC8700/71

15/10 Version 1.5

PRODUCT INFORMATION

•This product meets the requirements regarding

interference suppression on radio and TV.

•After the product has been repaired, it should function

properly and has to meet the safety requirements as

officially laid down at this moment.

TECHNICAL INFORMATION

•Colour : Deep Black & Basic

Blue

•Battery type : Li-Ion

•Battery voltage : 12.8 V

•Charging time : 6 hour(s)

•Runtime : 80 min.

Usability

•Threshold climbing : 13 mm

•24-hour scheduling

•Infrared sensors

•Types of Floors : Hardfloor

•Smart detection system : 12 sensors

Nozzles and accessories

•Exhaust filter, AC power adaptor, Side brushes (2 pairs)

Dimensions & weight

•Dimensions : 60.1 x 330 mm

•Product weight : 1.53 kg

with packaging : 2.9 kg

Accessories included

•Docking station

OPTIONAL (accessories)

•No specific issues

FC8700/01 / FC8700/71

2-16

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

•First make sure that the appliance is unplugged.

•To empty and/or replace the Dustbin assy, the Top Cover

has to be removed (see picture).

•Turn the appliance upside down .

•The brushes can easily be pulled out and replaced, after

hearing the < click> the brush is placed in a correct way.

•Remove the battery cover by removing the 2 screws A,

the battery can now be removed or replaced.

•To open the appliance:

First remove the cover of the Bumper assy by removing

the 4 screws B.

Remove the Upper housing by removing the 6 screws C,

2 screws are positioned in the battery compartment, be

aware to unplug the wire.

•Now the wheel scan easily be pulled out and be replaced

if necessary.

Remark: notice that each wheel assy have different wires

to avoid mis-repair.

•To replace the inner parts of the Bumper assy:

Lift the Main PCB by removing the 4 screws D, now

you can replace the Bumper bracket by removing the 2

screws.

•To replace the Fan motor:

Turn the Bottom housing upside down and remove the 2

screws F, unplug the connector. Now the Fan motor can

be replaced and re-connected.

FC8700/01 / FC8700/71

3-16

REPAIR INSTRUCTION

IR Sensors calibration for replacing PCBA

Purpose: IR Sensors have to be calibrated if replacing

PCBA. In order to avoid to move backward and

abnormally.

Calibration Steps:

Step 1: Power o device and short calibration enable

pin to ground pin with jumper(wire) shown as

Fig. 1 and Fig. 2.

Fig. 1

Fig. 2

Step 2: Put robot 7 cm height above calibration surface

(AA papers).

Step 3: Power on Robot cleaner wait 5 seconds.

Then the calibration is done. After nished the

calibration, remove the jumper(wire).

After calibration the robot need to be tested for the drop-

down sensors: This can be done on a table. If the robot

does not fall from the table the calibration was done in a

proper way.

Remark:

Material for white color reference:

Using AA white paper or glossy paper as calibration

surface.

FC8700/01 / FC8700/71

4-16

M500-IR,

Orange, black

and blue

Right big wheel,

Black and

brown

IR, Dustbin assy

present sensor,

Purple and red

Front IR

Right IR

Rear IR,

Purple

and black

Rear IR,

Orange, black

and brown

Battery socket,

Red, black

and brown

Left big wheel,

Orange

and black

Left brush,

Green

and blue

Right brush,

Blue and

black

IR, Dustbin assy

present sensor,

Red and green

Fan,

Black

and red

Power PCBA,

Orange, red,

brown and

black

Left IR

OK!

Not

OK!

REPAIR INSTRUCTION

Wiring diagarm

FC8700/01 / FC8700/71

5-16

PARTS LIST

Pos Service code Description Remark

4322 006 67901

4322 006 22901

4322 006 09961

4322 006 08901

4322 006 20951

Suction motor assy A

Recharable battery 1300 mAh - 12.8 V

Switching adaptor 24 V - 1000 mA

Super Li-Ion

Euro plug

AU/NZ plug

Korea plug

4322 006 23111

4322 004 25961

4322 006 67941

4322 006 67951

4322 005 36651

Docking station A

Side brush

Side brush motor assy Left

Side brush motor assy Right

Dustbin assy A

4322 004 94152

4322 005 36681

4322 005 36711

4322 006 25401

4322 006 25811

Filter Hawk A

Big wheel assy M500 A

Frint bumper assy A

Power PCBA

Main PCB FC8700

FC8700/01 / FC8700/71

6-16

EXPLODED VIEW

FC8700/01 / FC8700/71

7-16

EXPLODED VIEW

FC8700/01 / FC8700/71

8-16

EXPLODED VIEW

FC8700/01 / FC8700/71

9-16

EXPLODED VIEW

FC8700/01 / FC8700/71

10-16

EXPLODED VIEW

Andere Handbücher für FC8700/01

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Staubsauger Handbücher

Philips

Philips EasyStar FC8802 Bedienungsanleitung

Philips

Philips FC8398/02 Bedienungsanleitung

Philips

Philips Cucina FC6052 Bedienungsanleitung

Philips

Philips FC6402 Handbuch

Philips

Philips FC9932 Bedienungsanleitung

Philips

Philips FC6090 Bedienungsanleitung

Philips

Philips FC8459 Bedienungsanleitung

Philips

Philips SilentStar FC9306 Bedienungsanleitung

Philips

Philips FC9202 Bedienungsanleitung

Philips

Philips FC7070/01 Bedienungsanleitung

Philips

Philips FC8710 Bedienungsanleitung

Philips

Philips FC9110 Bedienungsanleitung

Philips

Philips AquaTrio Cordless 9000 Series Bedienungsanleitung

Philips

Philips MiniVac FC6048/01 Bedienungsanleitung

Philips

Philips FC7088 Bedienungsanleitung

Philips

Philips FC8794 Bedienungsanleitung

Philips

Philips FC 9104 Bedienungsanleitung

Philips

Philips FC8942 Bedienungsanleitung

Philips

Philips FC8920 Bedienungsanleitung

Philips

Philips XC8147/01 Bedienungsanleitung

Philips

Philips FC9713 Montageanleitung

Philips

Philips FC8820 Bedienungsanleitung

Philips

Philips FC6132/02 Bedienungsanleitung

Philips

Philips FC6132/02 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung