Philips FC9012 Bedienungsanleitung

ServiceManual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

Universe Vacuum cleaner

FC9012

03/03

PRODUCT INFORMATION

- This product meets the requirements regarding

interference suppression on radio and TV.

- After the product has been repaired, it should function

properly and has to meet the safety requirements as

officially laid down at this moment.

TECHNICAL INFORMATION

- Colour : Fresh blue

- Maximum air displacement : 37 l/sec.

- Maximum vacuum water column : 310 cm

- Power consumption (IEC) 230 V : 1400 W

- Duststorage capacity : 3 L

- Type number dustbag : FC8021

- Cord length (depends on version) : 7 metres

- Filter system : Paper dustbag

: Exhaust AFS air filter

: Motor inlet filter

- Dimensions of cleaner : 460 x 315 x 270 mm

- Dimensions of packaging : 595 x 395 x 295 mm

- Net weight : 5.88 kg

- Gross weight : 9.135 kg

OPTIONAL (accessories)

- FC8021 S-bags

- FC8030 AFS-filter

- FC8031 HEPA Air Filter

- FC8034 Upgrate kit Active Carbon Filter

- HR6988 Turbo brush nozzle

- HR8040 Polishing nozzle

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- Open the appliance, first remove the exhaust filter grille

(item 20), and then remove the 2 screws - Cof the switch

control panel (item 15).

- To remove the the panel, pos 14a + b must be removed by

using a screwdriver to separate the two covers from the panel

as shown in the picture.

- Undo and remove the 9 screws - Cin the upper housing

(item 8). You will require a screwdriver with a 14.5 cm-long

shank for this. Srewdriver 9965 000 08332 can be used.

- The component configuration shown in the exploded view

may differ in case of specific versions. The components are

distinguished by means of code numbers.

- When the repair is finished, check whether all functions of

the appliance work properly.

- To disassemble the cord winder, use TORX screwdriver no.

T10, which is one of a set consisting of T20; T15; T10; T9;

T8; T7 and T6 (code number 4822 395 50145).

C2x

C9x 14a + b

FC9012

REPAIR INSTRUCTION

- Item 4, cotton dustbag, is used in countries in which paper

dustbags are not available.

- If the reel half spring unit is replaced, shaft Amust be

lubricated with silicone grease. Do not apply any silicone

grease to or spill any grease on terminals (43) or conductors

(42).

- Item 40 is provided with a long cord-winder spring, but

both long and short cords can be used in combination with

this spring. (L = 9.3 m)

- Depending on the original cord, the spare cord must be

shortened to the length of the original cord.

- The cord winder spring must be tensioned to the maximum

level and then be rewound approx. 1.5 turn

- Item 13, air valve, opens to cool the motor if the air

displacement is too low or if the airflow is blocked.

- If the function of the electronic control unit (item 12) is

not required, the Triac must be short-circuited in the

manner shown in the circuit diagram.

- When the vacuum cleaner is used to suck up fine dust the

pores of the dustbag may become clogged, causing the

passage of air through the dustbag to become obstructed.

As a result, the dustbag-full indicator will indicate that the

dustbag needs to be replaced, eventhough the dustbag is not

full at all.

- Due to introduction of a new switch (item 11) 0320

onwards, which is not interchangable with the old switch

soldered on the PCB (item 12).

- The switch lever assy (item 11a) is also modified.

To recognize the switches:

New spares are:

Switch soldered version - 4322 006 50600

Switch lever assy - 4322 009 08980

ELECTRICAL DIAGRAM

Old New

∅13 mm ∅10 mm

MOTOR

POWER

MODULE

Black

Blue

Brown

CORD WINDER

Short-circuit

Triac

2-7

= changed

FC9012

PARTS LIST

3-7

Pos Service code Description

11a

13a

13b

14a

14b

4322 005 13450

4322 003 18290

4322 003 18160

4822 480 10113

4322 004 93290

4322 003 18300

4322 001 73310

4322 005 12550

4322 003 18060

4322 003 20410

4322 000 37300

4322 009 07040

4322 006 21480

4322 006 50600

4322 009 08420

4322 009 08980

4322 006 22560

4322 005 12200

4322 005 12210

4322 003 19950

4322 003 19940

4322 009 08310

4322 003 17900

4322 000 37450

4322 005 12190

4322 009 08320

4322 000 37460

4322 004 92910

4322 001 73280

4322 003 18000

4322 000 37420

4322 000 37430

4322 003 18080

4322 003 18910

4322 003 20390

4322 003 17960

4322 001 73300

4322 003 18040

4322 003 18010

4322 003 18020

Dust cover Fresh blue

Dust cover lock m.grey

Dustbag holder

S-paper dustbags FC8021

Cotton dustbag

Cordwinder lever

Sealing rim

Dustbag detector

Upper housing m.grey

Clamp upper/lower housing

Triple ﬁlter

Grill + triple ﬁlter

Switch soldered version

Switch sold. vers. 0320 onwards

Switch lever assy

Switch lever assy 0320 onwards

PCB slide turn 230V

Dustbag full indicator

Air valve

Cover R

Cover L

Panel assy turn Fresh blue

Lower housing m.grey

Silencer 4 wall

Caster assy m.grey

Exhaust grille

Exhaust diffusor

Electr.static ﬁlter FC8030

Filter sealing

S-class sealing

Silencer 1 wall

Silencer 2 bottom

Cord outlet m.grey

Rear wheel lock red

Receipt. housing A.C.

Rear wheel m.grey

Motor buffer back

Inlet sealing

Motor cap top

ANS disc

Pos Service code Description

4322 001 73290

4322 009 06430

4322 000 37440

4322 003 18030

4322 009 07940

4322 001 72360

4322 009 07950

4322 009 07970

4322 006 01440

4322 006 01760

4322 006 01680

4322 006 01720

4322 006 01410

4322 006 01670

4322 006 01460

4322 003 18850

4322 005 13510

4322 007 16000

4322 004 22570

4322 003 18870

4322 005 13410

4322 004 41140

4322 004 22610

4322 001 99120

4322 007 45550

4322 004 22560

4322 004 22740

4322 004 22900

4322 005 11040

8838 041 01010

9965 000 03349

4822 358 10205

4822 479 20201

4322 004 22590

5322 390 20011

4322 002 82550

4322 002 82080

Motor bufferring front

Motor A 1441 230V

Silencer 3 ans

Motor cap bottom

Reel half spring unit (L = 9m)

Brake tyre

Reel half contact unit

Contact ring plate

Argentina L = 9.3 m

Australia L = 9.3 m

Taiwan L = 6.3 m

U.K. / H.K. L = 9.3 m

Euro 4.8 mm pins L = 9.3 m

Swiss L = 9.3 m

Italy L = 9.3 m

C-bend B1

C-bend B1 hose assy

Leaf spring assy

Plumeau assy (opt.)

Crevice nozzle

Acc. bridge assy

Metal tube (opt.)

Telesc. tube

Tube bush

Tube spring

Small nozzle

Nozzle RD262

Polishing nozzle

Polishing disc

Polishing brushes

Coupl. piece (standard) (opt.)

Drive belt (opt.)

Brush assy (opt.)

Turbo nozzle (opt.)

Silicon grease for shaft

Screw 3.5 x 12 T10

Screw 3.5 x 19

= changed

FC9012

EXPLODED VIEW

11a

13a

13b

14a

14b

4-7

FC9012

EXPLODED VIEW

black

brownblue

44÷49

40 41

5-7

FC9012

EXPLODED VIEW

Argentina

Australia

Taiwan 45

Europe Ø 4.8mm 47

Swiss 48

Italy 49

46U.K. / H.K.

6-7

FC9012

EXPLODED VIEW

7-7

Inhaltsverzeichnis

Andere Philips Staubsauger Handbücher

Philips

Philips SpeedPro Max XC7043 Bedienungsanleitung

Philips

Philips SmartPro Compact Bedienungsanleitung

Philips

Philips XC8147/01 Bedienungsanleitung

Philips

Philips PowerPro Aqua FC6404 Bedienungsanleitung

Philips

Philips FC6842/01 Bedienungsanleitung

Philips

Philips FC9150 Bedienungsanleitung

Philips

Philips Cucina FC6052 Bedienungsanleitung

Philips

Philips FC8323/09 Bedienungsanleitung

Philips

Philips FC9160 Bedienungsanleitung

Philips

Philips FC9184/01 Bedienungsanleitung

Philips

Philips FC9312/01 Bedienungsanleitung

Philips

Philips AquaTrio Pro FC7090 Bedienungsanleitung

Philips

Philips FC8188/01 Bedienungsanleitung

Philips

Philips FC9266/01 Bedienungsanleitung

Philips

Philips FC8412 Bedienungsanleitung

Philips

Philips FC9179 Bedienungsanleitung

Philips

Philips FC9306/02 Bedienungsanleitung

Philips

Philips FC9150/01 Bedienungsanleitung

Philips

Philips FC9018/01 Bedienungsanleitung

Philips

Philips FC8089/81 Bedienungsanleitung

Philips

Philips Impact Excel FC8396/02 Bedienungsanleitung

Philips

Philips HR6988/01 Bedienungsanleitung

Philips

Philips AquaTrio Bedienungsanleitung

Philips

Philips Performer Active FC8655/01 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch