Pilz PSSu E PD Bedienungsanleitung
PSSu E PD(-T)
Operating instructions 21304-EN-04
}Decentralised system PSSuniversal I/O
Preface
This document is a translation of the original document.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made
for internal purposes. Suggestions and comments for improving this documentation will be
gratefully received.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,
SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks
of Pilz GmbH & Co. KG in some countries.
SD means Secure Digital
Contents
Operating instructions PSSu E PD(-T)
21304-EN-04 3
Section 1 Introduction 5
1.1 Validity of documentation 5
1.1.1 Retaining the documentation 5
1.2 Definition of symbols 5
Section 2 Overview 7
2.1 Module structure 7
2.2 Module features 7
2.3 Front view 8
Section 3 Safety 10
3.1 Intended use 10
3.2 Safety regulations 11
3.2.1 Use of qualified personnel 11
3.2.2 Warranty and liability 11
3.2.3 Disposal 11
Section 4 Function description 12
4.1 Block diagram 12
4.2 Module features 12
4.2.1 Functions 12
4.3 Configuration 12
4.3.1 Addresses in the process image 12
Section 5 Installation 13
5.1 General installation guidelines 13
5.1.1 Dimensions 13
5.2 Installing the base module 14
5.3 Inserting and removing an electronic module 15
5.3.1 Inserting an electronic module 16
5.3.2 Removing an electronic module 17
5.3.3 Changing an electronic module during operation 17
Section 6 Wiring 18
6.1 General wiring guidelines 18
6.1.1 Mechanical connection of the base modules 18
6.2 Terminal configuration 20
Section 7 Operation 22
7.1 Messages 22
7.2 Display elements 22
7.2.1 Display elements for module diagnostics 22
Section 8 Technical details 23
Introduction
Operating instructions PSSu E PD(-T)
21304-EN-04 5
1 Introduction
1.1 Validity of documentation
This documentation is valid for the products PSSu E PD and PSSu E PD-T. It is valid until
new documentation is published.
The module PSSu E PD-T is suitable for use where there are increased environmental re-
quirements (see Technical Details).
This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.
1.1.1 Retaining the documentation
This documentation is intended for instruction and should be retained for future reference.
1.2 Definition of symbols
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.
NOTICE
This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.
Introduction
Operating instructions PSSu E PD(-T)
21304-EN-04 6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Operating instructions PSSu E PD(-T)
21304-EN-04 7
2 Overview
2.1 Module structure
A module consists of
}Electronic module and
}Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and are used to connect
the field wiring. The electronic modules are inserted on to the base modules and determine
the module's function.
Details of the base modules that can be used are available in the chapter entitled “Intended
Use”.
2.2 Module features
The product has the following features:
}The module routes the periphery supply from the module bus to the base module ter-
minals.
}LED for:
– Periphery supply
}Application range depends on the base module
}T-type:
PSSu E PD-T: for increased environmental requirements
Overview
Operating instructions PSSu E PD(-T)
21304-EN-04 8
2.3 Front view
2111
2212
2313
2414
11
0V
21
0V
12
0V
22
0V
13
(C)
23
(C)
14 24
PSSu E
PD
24V
24V 24V
PSSu E
PD
312195
000000
001
1
3
8
7
4
5
6
10
2
11
9
A
B
Key:
}A: Electronic module
}B: Base module
}1: LED for module diagnostics
}2: Labelling strip with:
– Name of electronic module
– Order number
– Serial number
– Hardware version number
– 2D code
}3: Labelling strip for the terminal configuration on the base module
}4: Name of electronic module
}5: Connection level 1
}6: Connection level 2
}7: Connection level 3
}8: Connection level 4
Overview
Operating instructions PSSu E PD(-T)
21304-EN-04 9
}9: Square mounting holes (connection levels 1, 2, 3 and 4)
– With screw to loosen/tighten the screw terminal on base modules with screw termin-
als
– With mechanism to operate the cage clamp on base modules with cage clamp ter-
minals
}10: Round connection holes (connection levels 1, 2, 3 and 4) for connecting the signal
lines
}11: Mounting slot for colour marker to label the connection level (connection levels 1, 2,
3 and 4)
Safety
Operating instructions PSSu E PD(-T)
21304-EN-04 10
3 Safety
3.1 Intended use
The module may be used for additional connections to the periphery supply. The periphery
supply can be drawn from the connections, but may not be fed through that route.
The module PSSu E PD-T is suitable for use where there are increased environmental re-
quirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}Any component, technical or electrical modification to the module
}Use of the module outside the areas described in this manual
}Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by
}PSSuniversal Configurator and PSSuniversal Assistant from Version
1.4.0
}PAS4000 from Version 1.0.0
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu E PD module may be used in conjunction with the following base modules:
}PSSu BP 1/8 S
}PSSu BP 1/8 C
}PSSu BP-C 1/8 S
}PSSu BP-C 1/8 C
}PSSu BP 1/12 S
}PSSu BP 1/12 C
}PSSu BP-C1 1/12 S
}PSSu BP-C1 1/12 C
The module PSSu E PD-T may be used in conjunction with the following base modules:
}PSSu BP 1/8 S-T
}PSSu BP 1/8 C-T
}PSSu BP-C 1/8 S-T
}PSSu BP-C 1/8 C-T
}PSSu BP 1/12 S-T
}PSSu BP 1/12 C-T
}PSSu BP-C1 1/12 S-T
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Pilz Steuereinheit Handbücher
Pilz
Pilz PSSu E F PS2 Bedienungsanleitung
Pilz
Pilz PSSu E F 4DI Bedienungsanleitung
Pilz
Pilz PNOZ mc12p Bedienungsanleitung
Pilz
Pilz PIT gb LLLE Bedienungsanleitung
Pilz
Pilz PNOZ m EF 1MM Bedienungsanleitung
Pilz
Pilz PMCprotego S1--2 Bedienungsanleitung
Pilz
Pilz PSSu E F BSW Bedienungsanleitung
Pilz
Pilz PNOZ mo4p Bedienungsanleitung
Pilz
Pilz PSSu E F 4DO 0.5 Bedienungsanleitung
Pilz
Pilz PNOZ p1vp Bedienungsanleitung
Pilz
Pilz PNOZ m ES Powerlink Bedienungsanleitung
Pilz
Pilz PNOZ ms4p Bedienungsanleitung
Pilz
Pilz PNOZ m EF 2MM Bedienungsanleitung
Pilz
Pilz PNOZ mi2p Bedienungsanleitung
Pilz
Pilz PSSu E AI SHT2 Bedienungsanleitung
Pilz
Pilz ms3p HTL Bedienungsanleitung
Pilz
Pilz PNOZ mc1p Bedienungsanleitung
Pilz
Pilz PNOZ mc5.1p Bedienungsanleitung
Pilz
Pilz PZE 9P Bedienungsanleitung
Pilz
Pilz mc1p coated Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
