Pilz PDP67 F 8DI ION PT Bedienungsanleitung

PDP67 F 8DI ION PT

Operating Manual-1004253-EN-02

}Decentralised periphery

Preface

This document is the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for the user's internal purposes. Suggestions and comments for improving this documenta-

tion will be gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 3

Section 1 Introduction 4

1.1 Validity of documentation 4

1.2 Using the documentation 4

1.3 Definition of symbols 4

Section 2 Overview 6

2.1 Scope of supply 6

2.2 Unit features 6

2.3 Front view 7

Section 3 Safety 8

3.1 Intended use 8

3.2 Safety regulations 8

3.2.1 Use of qualified personnel 8

3.2.2 Warranty and liability 8

3.2.3 Disposal 9

Section 4 Function description 10

4.1 Operation 10

4.1.1 Inputs 10

4.1.2 Outputs 10

4.2 Data download 10

4.3 Diagnostics 10

Section 5 Installation 11

5.1 General installation guidelines 11

5.2 Dimensions 11

Section 6 Wiring 12

6.1 General wiring guidelines 12

6.2 Connector pin assignment 13

6.3 Wiring examples 14

6.3.1 Example: Single-channel, failsafe input device, without test pulse 14

6.3.2 Example: Dual-channel input devices, without test pulses 15

6.3.3 Example: Single-channel, failsafe input device, with test pulse 16

6.3.4 Example: Dual-channel, failsafe input device, with test pulse 17

Section 7 Operation 18

7.1 Messages 18

Section 8 Technical details 19

8.1 Safety characteristic data 21

Section 9 Order reference 22

9.1 Product 22

9.2 Accessories 22

Introduction

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 4

1 Introduction

1.1 Validity of documentation

This documentation is valid for the product PDP67 F 8DI ION PT. It is valid until new docu-

mentation is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

1.2 Using the documentation

This document is intended for instruction. Only install and commission the product if you

have read and understood this document. The document should be retained for future ref-

erence.

1.3 Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

Introduction

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 5

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 6

2 Overview

2.1 Scope of supply

}Decentralised input module PDP67 F 8DI ION PT

}4 blind plugs

2.2 Unit features

Application of the product PDP67 F 8DI ION PT:

Decentralised input module for connection to a Pilz control system, for use in a rugged in-

dustrial environment up to protection type IP67.

The product has the following features:

}Protection type IP67

}8 inputs for connecting 8 single-channel or 4 dual-channel sensors

}8 outputs, which can be configured as

– Standard outputs

– Test pulse outputs

– 24 V outputs

}LED for:

– Operating status

– Connection status

– Fault

– Input status at each input

Overview

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 7

2.3 Front view

Legend:

}X0:

Functional earth

}X1 ... X4:

Inputs and outputs

}X5:

Interface to the control system or to X6 on the upstream module

}X6:

Interface to X5 on the downstream module

}LEDs:

– Device

– Fault

– Traffic

– IO0 ... IO7

Safety

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 8

3 Safety

3.1 Intended use

The product PDP67 F 8DI ION PT is a decentralised input module which is suitable for use

in a rugged industrial environment up to protection type IP67.

The module can be connected to a PDP link module PNOZ ml2p, PNOZ mml2p or PNOZ m

EF PDP Link from the configurable control system PNOZmulti.

The following is deemed improper use in particular

}Any component, technical or electrical modification to the product,

}Use of the product outside the areas described in this manual,

}Use of the product outside the technical details (see Technical details).

NOTICE

EMC-compliant electrical installation

The product is designed for use in an industrial environment. The product

may cause interference if installed in other environments. If installed in other

environments, measures should be taken to comply with the applicable

standards and directives for the respective installation site with regard to in-

terference.

3.2 Safety regulations

3.2.1 Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,

maintained and decommissioned by competent persons.

A competent person is a qualified and knowledgeable person who, because of their train-

ing, experience and current professional activity, has the specialist knowledge required. To

be able to inspect, assess and operate devices, systems and machines, the person has to

be informed of the state of the art and the applicable national, European and international

laws, directives and standards.

It is the company’s responsibility only to employ personnel who

}Are familiar with the basic regulations concerning health and safety / accident preven-

tion,

}Have read and understood the information provided in the section entitled Safety

}Have a good knowledge of the generic and specialist standards applicable to the spe-

cific application.

3.2.2 Warranty and liability

All claims to warranty and liability will be rendered invalid if:

}The product was used contrary to the purpose for which it is intended

}Damage can be attributed to not having followed the guidelines in the manual or

Safety

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 9

}Operating personnel are not suitably trained.

3.2.3 Disposal

}In safety-related applications, please comply with the mission time TM in the safety-re-

lated characteristic data.

}When decommissioning, please comply with local regulations regarding the disposal of

electronic devices (e.g. Electrical and Electronic Equipment Act).

Function description

Operating Manual PDP67 F 8DI ION PT

1004253-EN-02 10

4 Function description

4.1 Operation

The functions of the inputs and outputs are configured in the system software.

4.1.1 Inputs

Single and dual-channel sensors can be connected to the inputs, with or without test

pulses.

Input signals must show a “High” (“1” signal) of 15 VDC (+15 ... +30 VDC) and a “Low” (“0”

signal) of 0 VDC (-3 ... +5 VDC).

The input status is signalled to the control system via the bus.

Green LEDs indicate the status of the inputs.

Test pulses can be used to check the inputs for shorts across contacts and correct function-

ality.

4.1.2 Outputs

The outputs can be used as standard outputs, as test pulse outputs or as 24 VDC outputs.

The test pulse outputs are suitable for testing the sensor wiring. All safety-related inputs

must operate in accordance with the failsafe principle (on switching off).

Two test pulses are available on each plug-in connector; these test pulses are permanently

assigned to the inputs. The assignment of the test pulses to the inputs cannot be changed

in the system software's configurator.

If the test pulse outputs are not being used, they can be configured as standard outputs or

24 VDC outputs in the system software's configurator.

4.2 Data download

Communication with the control system is via a safe data link. Data is exchanged cyclically.

4.3 Diagnostics

The status and error messages shown by the LEDs are saved in an error stack. The sys-

tem software can read this error stack.

Inhaltsverzeichnis

Andere Pilz E/A-System Handbücher

Pilz

Pilz PSS u2 EF 8DO 0.5A Bedienungsanleitung

Pilz

Pilz PNOZ ml1p Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16DI Bedienungsanleitung

Pilz

Pilz PSSu K S RS232 Modbus ASCII Bedienungsanleitung

Pilz

Pilz PSSu E S 2AI U Bedienungsanleitung

Pilz

Pilz PSSu E S 2AI TC Bedienungsanleitung

Pilz

Pilz PSSu E PS-P +/-10V Bedienungsanleitung

Pilz

Pilz PSS u2 ES 4AI I Bedienungsanleitung

Pilz

Pilz PSSu K S 8DI 8DO 0.5 Bedienungsanleitung

Pilz

Pilz PSSu H SB-T Bedienungsanleitung

Pilz

Pilz PSSu E S 4DI-D Bedienungsanleitung

Pilz

Pilz PSS u2 Bedienungsanleitung

Pilz

Pilz PSSu E F BSW Bedienungsanleitung

Pilz

Pilz PSSu E F 4DI Bedienungsanleitung

Pilz

Pilz PSSu H FS SN SD Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PNOZ m EF 4AI Bedienungsanleitung

Pilz

Pilz PSSu E S 2AO I Bedienungsanleitung

Pilz

Pilz PSS u2 ES 8PTD 24V 0V Bedienungsanleitung

Pilz

Pilz PSS u2 P0 F/S EIP Bedienungsanleitung

Pilz

Pilz PSS u2 ES 16PT 0V Bedienungsanleitung

Pilz

Pilz PSSu K F INC Bedienungsanleitung

Pilz

Pilz PSSu E F PS Bedienungsanleitung

Pilz

Pilz PSS u2 EF 2DO R 8A Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung