Planet ISW-511 Series Bedienungsanleitung

4-Port 10/100Mbps +1/2 100FX Fiber Port

Industrial Fast Ethernet Switch

ISW-511 / ISW-621 Series

ISW-511T / ISW-621T Series

User's Manual

Trademarks

Contents are subject to revision without prior notice

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances

in electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET 4-Port 10/100Mbps +1/2 100FX Industrial Fast Ethernet Switch

User’s Manual

For Models: ISW-511 / ISW-621 / ISW-511T / ISW-621T Series

Revision: 1.4 (April, 2015)

Part No: EM-ISW-511_621_v1.4 (2350-AH0150-003)

Table of Contents

1. Introduction .............................................................................. 6

1.1 Package Contents ................................................................ 6

1.2 How to Use This Manual....................................................... 6

1.3 Product Features ................................................................. 7

1.4 Product Specications .......................................................... 8

2. Installation ..............................................................................14

2.1 Product Description.............................................................14

2.1.1 Switch Front Panel ....................................................15

2.1.2 LED Indicators ..........................................................17

2.1.3 Switch Upper Panel ...................................................17

2.1.4 Wiring the Power Inputs ............................................18

2.1.5 Wiring the Fault Alarm Contact...................................19

2.2 Mounting Installation ..........................................................20

2.2.1 Install DIN-Rail Mounting ...........................................20

2.2.2 Wall Mount Plate Mounting .........................................22

3. Applications .............................................................................23

4. Switch Operation......................................................................27

4.1 Address Table.....................................................................27

4.2 Learning ............................................................................27

4.3 Forwarding & Filtering .........................................................27

4.4 Store-and-Forward..............................................................28

4.5 Auto-negotiation.................................................................28

5. Troubleshooting ........................................................................29

APPENDIX A: Networking Connection...............................................30

A.1 Switch’s RJ45 Pin Assignments ............................................30

A.2 RJ45 cable Pin Assignments ................................................31

1. Introduction

1.1 Package Contents

Check the contents of your package for the following parts:

zIndustrial Fast Ethernet Switch x 1

zUser's Manual x 1

zDIN Rail Kit x 1

zWall Mount Kit x 1

If any of these are missing or damaged, please contact your dealer

immediately. If possible, retain the carton including the original packing

material, and use them again to repack the product in case there is a

need to return it to us for repair

1.2 How to Use This Manual

This Industrial Fast Ethernet Switch User Manual is structured as

follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical

installation of the Industrial Fast Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Fast Ethernet Switch application.

Chapter 4 Switch operation

The chapter explains the Industrial Fast Ethernet Switch transmit

operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Fast Ethernet

Switch.

Appendix A

This chapter contains cable information of the Industrial Fast Ethernet

Switch.

1.3 Product Features

Physical Port

Model Name Ports Fiber Optical Interface

Copper Optical Mode Distance

ISW-511

4 x

10/100BASE-TX

1 x

100BASE-FX

Multi-mode 2km

ISW-511T

ISW-511S15 Single-

mode 15km

ISW-511TS15

ISW-621

2 x

100BASE-FX

Multi-mode 2km

ISW-621T

ISW-621S15 Single-

mode 15km

ISW-621TS15

ISW-621TF

Multi /

Single

Mode

depending

on SFP

Module

Layer 2 Features

Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX

Supports auto-negotiation and 10/100Mbps half / full duplex mode

for each copper port

High performance store and forward architecture, broadcast storm

control, runt/CRC ltering eliminates erroneous packets to optimize

the network bandwidth

Prevents packet loss with back pressure (half-duplex) and IEEE

802.3x pause frame ow control (full-duplex)

Backplane (switching fabric):

ISW-511 / ISW-511T Series: 1Gbps

ISW-621 / ISW-621T Series: 1.2Gbps

Integrated address look-up engine, supporting 2K absolute MAC

addresses

1Mbit on-chip frame buffer on ISW-511 / ISW-621 Series and ISW-

511T / ISW621T Series

Automatic address learning and address aging

CSMA/CD Protocol

Industrial Case / Installation

IP30 metal case

DIN rail and wall mount design

12 to 48V DC, redundant power with polarity reverse protect function

and connective removable terminal block for master and slave power

-10 to 60 degrees C operating temperature on ISW-511 / ISW-

511S15 / ISW-621 / ISW-621S15

-40 to 75 degrees C operating temperature on ISW-511T / ISW-

511TS15 / ISW-621T / ISW-621TS15 / ISW-621TF

1.4 Product Specications

Model ISW-511 ISW-511S15

Hardware Specications

Copper

Ports 4 x 10/100BASE-TX, auto-negotiation, auto-MDI/

MDI-X

Cable

10BASE-T : 2-pair UTP Cat. 3, 4, 5 cable (100

meters, max.)

100BASE-TX : 2-pair UTP Cat. 5, 5e, 6 cable

(100 meters, max.)

Fiber Optical

Port 1 x 100BASE-FX

Cable 50/125μm ber

62.5/125μm ber 9/125μm ber

Mode multi-mode single-mode

Distance 2km 15km

Dimensions (W x D x H) 135 x 97 x 32mm

Weight 436g

Power Requirements 12~48V DC, Redundant power with polarity

reverse protection function

Power Consumption /

Dissipation 9.1 watts / 31BTU

Installation DIN rail kit and wall mount ear

Switch Specications

Switch Processing Scheme Store-and-Forward

Address Table 2K entries

Buffer 1Mbit

Flow Control Back pressure for half duplex,

IEEE 802.3x pause frame for full duplex

Switch Fabric 1Gbps

Throughput

(Packet Per Second) 0.74Mpps @ 64Bytes

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet, 10BASE-T

IEEE 802.3u Fast Ethernet, 100BASE-TX,

100BASE-FX

IEEE 802.3x full-duplex ow control

Stability testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Temperature Operating: -10~60 degrees C

Storage: -40~85 degrees C

Humidity Operating Operating: 5% to 90%, Storage: 5% to 90%

(non-condensing)

Regulation Compliance FCC Part 15 Class A, CE

Model ISW-511T ISW-511TS15

Hardware Specications

Copper

Ports 4 x 10/100BASE-TX, auto-negotiation,

auto-MDI/MDI-X

Cable

10BASE-T : 2-pair UTP Cat. 3, 4, 5 cable

(100 meters, max.)

100BASE-TX : 2-pair UTP Cat. 5, 5e, 6 cable

(100 meters, max.)

Fiber Optical

Port 1 x 100BASE-FX

Cable 50/125μm ber

62.5/125μm ber 9/125μm ber

Mode multi-mode single-mode

Distance 2km 15km

Dimensions (W x D x H) 135 x 97 x 32mm

Weight 436g

Power Requirements 12~48V DC, Redundant power with polarity

reverse protection function

Power Consumption /

Dissipation 13.7 watts / 46BTU

Installation DIN rail kit and wall mount ear

Switch Specications

Switch Processing Scheme Store-and-Forward

Address Table 2K entries

Buffer 1Mbit

Flow Control Back pressure for half duplex,

IEEE 802.3x pause frame for full duplex

Switch Fabric 1Gbps

Throughput

(Packet Per Second) 0.74Mpps @ 64Bytes

Standards Conformance

Standards Compliance

IEEE 802.3 Ethernet, 10BASE-T

IEEE 802.3u Fast Ethernet, 100BASE-TX,

100BASE-FX

IEEE 802.3x full-duplex ow control

Stability Testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Planet Schalten Handbücher

Planet

Planet IGSW-24040T Bedienungsanleitung

Planet

Planet VC-412 Bedienungsanleitung

Planet

Planet EH-1600 Bedienungsanleitung

Planet

Planet BSP-360 Bedienungsanleitung

Planet

Planet WGs-4215-8HP2S Bedienungsanleitung

Planet

Planet NOVA100 Series Bedienungsanleitung

Planet

Planet VC-820M Bedienungsanleitung

Planet

Planet FNSW-2402 Bedienungsanleitung

Planet

Planet IGS-4215-4P4T Bedienungsanleitung

Planet

Planet KVM-210 M Series Bedienungsanleitung

Planet

Planet WGSW-2840 Bedienungsanleitung

Planet

Planet GS-5220 Series Bedienungsanleitung

Planet

Planet FGSW-4840S Bedienungsanleitung

Planet

Planet GSD-1008HP Bedienungsanleitung

Planet

Planet MGSW SERIES Bedienungsanleitung

Planet

Planet KVM-800 Bedienungsanleitung

Planet

Planet TSN-6325-8T4S4X Bedienungsanleitung

Planet

Planet UH-421 Bedienungsanleitung

Planet

Planet IDL-2402 Bedienungsanleitung

Planet

Planet CV-119/P2000 Bedienungsanleitung

Planet

Planet XGS-6350-12X8TR Bedienungsanleitung

Planet

Planet FSD-803PE Bedienungsanleitung

Planet

Planet IGS-5225-4T2S Bedienungsanleitung

Planet

Planet IGS-504HPT Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung