Polaris 2878840 Bedienungsanleitung

-1-

Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please

retain these installation instructions for future reference and parts ordering information.

P/N 2878840

IMPORTANT: Your Polaris RANGER 900 XP REAR BRUSHGUARD is exclusively designed for your

vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier

if the vehicle is clean and free of debris. For your safety and to ensure a satisfactory installation,

perform all installation steps correctly and in the sequence shown.

RANGER 900 XP REAR

BRUSHGUARD KIT

Application

RANGER 900 XP

APPROXIMATE ASSEMBLY TIME: 10-15 minutes

Kit Contents:

Ref Qty Part Description Part Number

1 1 Rear Brushguard 1018892

2 1 Rear Weld Mount, LH, Brushguard, TTN 1018890

3 1 Rear Weld Mount, RH, Brushguard, TTN 1018891

4* 4 Carriage Bolt-M8x1.25x20 mm 7518479

5* 10 Nut-M8x1.25 mm, Hex Flange, Nyloc 7547317

6* 2 Carriage Bolt-M8x1.25x85 mm -

1 Instructions 9924734

Items marked (*) are included in Hardware Kit PN 2204789.

Tools Required:

Metric Socket Set

-2-

INSTALLATION INSTRUCTIONS:

P/N 9924734 Rev 01 08/13

3. Install the mounting brackets

(PN 1018890 LH; 1018891 RH) onto

the rear brushguard (PN 1018892)

by aligning the holes on the brackets

with the brushguard studs. Secure the

brackets to the bumper using nuts

(PN 7547317). Figure 1.

4. Lift the vehicle and get under to install

the rear brushguard assembly

(PN 1018892) using two carriage bolts.

Hand tighten the nuts (PN 7547317).

Figure 2.

NOTE: Ensure the alignment of the

upper mounting holes of the bracket

with the dump box frame before

installing the carriage bolts.

1. Place the vehicle in “PARK” and turn the key to “OFF” position. Remove the key from the vehicle.

2. Unlatch the tailgate and disconnect the retaining cables. Remove the tailgate by opening the tailgate so that

it is about 2” from the closed and latched position, then lifting up on the left (driver’s) side of the tailgate to

disconnect it from the pivot. Once the lower left side is disconnected slide the tailgate slightly leftward to

disconnect it from the pivot on the right had (passenger’s) side.

5. Secure the rear bumper assembly with

the dump box frame with the four bolts

(PN 7518479). Hand tighten the nuts

(PN 7547317). Figure 3.

6. After installing the hardware, tighten

the four bolts. Tighten the two carriage

bolts just beyond snug.

NOTE: Torque to 12 ft. lbs. (16.26 Nm).

NOTE: Do not over tighten the carriage

bolts. This might cause damage to box

hinges.

7. Reinstall the tailgate.

Figure 1

Mounting

Bracket (RH) Rear Brushguard

Mounting Bracket (LH)

Figure 2

Bolt

Nut

Brushguard

Assembly

Figure 3

Bolt

Brushguard Assembly

Inhaltsverzeichnis

Andere Polaris Autozubehör Handbücher

Polaris

Polaris 2882167 Bedienungsanleitung

Polaris

Polaris 2882353 Bedienungsanleitung

Polaris

Polaris HK-338 Bedienungsanleitung

Polaris

Polaris 2879373 Bedienungsanleitung

Polaris

Polaris 2882857 Bedienungsanleitung

Polaris

Polaris RideCommand Bedienungsanleitung

Polaris

Polaris PRO HD 3500 Bedienungsanleitung

Polaris

Polaris FR-1516 Bedienungsanleitung

Polaris

Polaris RIDE COMMAND Bedienungsanleitung

Polaris

Polaris Mazda BT50 RW-50/15 Bedienungsanleitung

Polaris

Polaris 2880612 Bedienungsanleitung

Polaris

Polaris 2879953 Bedienungsanleitung

Polaris

Polaris 2876958 Bedienungsanleitung

Polaris

Polaris PROSPECTOR PRO Bedienungsanleitung

Polaris

Polaris 2879201 Bedienungsanleitung

Polaris

Polaris 2878839 Bedienungsanleitung

Polaris

Polaris 2882270 Bedienungsanleitung

Polaris

Polaris 2882271 Bedienungsanleitung

Polaris

Polaris 2881113 Bedienungsanleitung

Polaris

Polaris CM50 Bedienungsanleitung

Polaris

Polaris HomeLink 2882082 Bedienungsanleitung

Polaris

Polaris 2883455 Bedienungsanleitung

Polaris

Polaris 2016 RZR 4 900 Bedienungsanleitung

Polaris

Polaris 2879976 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung