Polaris BT50 Luxx Bedienungsanleitung

BT50 Luxx Installation Manual

Please read this manual before installing this product.

Thank you for purchasing the BT50Luxx

Before installing, be sure to thoroughly read these instructions.

Warranty for this product is 2 years from date of purchase, however warranty will be

void if:

• The unit is tampered with, damaged or modified in anyway.

• Reverse camera cable is cut or modified in any way (If applicable).

• Reverse camera is subjected to over voltage (if applicable).

• The Navigation SD card is damaged or tampered with in any way (this

includes installing foreign mapping or software onto the SD card).

• The installation of 3rd party apps that may cause harm to the unit.

• Warranty Terms

The BT50Luxx is covered for 2 years and includes:

• Defective Equipment • Defective Cables

Not Covered under warranty:

• Abuse

• Improper installation

• Alteration to Cables (includes cutting of any cables)

• Accidents

• Water damage

• Improper use

• Labour

• Postage and Handling

If you have any questions concerning the installation, warranty or the operation of the unit,

please contact Polaris on 1300 555 514.

We hope that you enjoy the BT50Luxx

Warranty details

 The wiring and installation of this unit requires special technical skill and experience.

If you do not feel confident installing this product or do not have the level of skill

necessary, please contact Polaris on 1300 555 514 so we can refer to a recommended

installer.

 This unit is designed to be used in a vehicle with a 12 volt battery and a negative

grounding. Before installing this unit to a recreational vehicle, bus, or truck, make sure

the battery voltage is appropriate for this unit to be used.

 To avoid short circuit in the electrical system, ensure that the negative battery cable is

disconnected before installation.

 To avoid possibility of shorting out the electrical circuit in the unit, never connect the

battery wire directly to the vehicle battery.

Always secure all wirings with cable clamps or adhesive tape to prevent short circuit.

 Please make sure all wiring connections and speaker wires are well insulated.

 When pulling the dash apart, please use quality trim tools to avoid damaging your

dash.

 Please do NOT cut any plugs off of any Polaris cameras. Doing so will void your

warranty! If you need to blend other brand cameras into our system, please call Polaris

on 1300 555 514 so we can refer you to a recommended dealer who has the skill and

experience in performing this type of work.

 If there is something you are not 100% sure about when installing this unit, please give

our experienced technicians a call on 1300 555 514.

Installation Notes

1. Use trim tool to remove air

con control panel

2. Pull Air conditioning panel

out.

3. Unplug harness and set air

con panel aside

4. Use trim tool to remove

fascia panel

5. Gently pull fascia out 6. Unplug button panel and set

aside

7. Remove 2 screws holding

OEM screen in place

8. Unplug harness and set

screen aside

9. Remove 2 screws holding

the CD housing in place

10. Unplug harness and set

CD housing aside

Removing your panel

Other wiring

• Hazard Switch extension cable

• 2 x USB retention adaptors > plug these into the cabled USB’s to retain your glove box USB

and one USB in your panel (if required).

• External Bluetooth microphone: unit does have internal microphone but you can run the

external microphone if you like. Normally mounted on steering wheel or top of drivers side

panel

• External GPS Antenna: Please mount this on top of your dash with the black side facing the sky

• Speaker: Only used if you have OEM sensors and want to retain the sound. Note: If this doesn't

work, unplug the red/white adaptor on main harness and plug in without adaptor.

• Reverse Camera cable with purple wire: NOT USED—use Plug H for reverse Camera

Wiring Diagram

Wiring Diagram: Reverse Camera

Head

REVERSE

TRIGGER

WIRE

REVERSE FOUND IN

ORIGINAL HARNESS

(COLOUR MIGHT

DIFFER FROM

BRANDS AND

MODELS)

Acc+

CUT AND TAPE OFF WIRES AS

NOT NEEDED IN THIS SET UP

RCA PLUGS INTO

CAMERA INPUT FOUND

ON HEAD UNIT

CONSTANT CAMERA AND TRIGGER

DIAGRAM 1

Head

REVERSE TRIGGER

WIRE

POWER FROM REVERSE

LIGHTS

RCA PLUGS INTO CAM-

ERA INPUT FOUND ON

HEAD UNIT

RCA CAMERA WITH REVERSE TRIGGER ONLY

DIAGRAM 2

Head

REVERSE TRIGGER WIRE

Acc+

CUT

AND

TAPE

OFF

WIRES

AS NOT

NEEDED

IN THIS

SET UP

RCA PLUGS

INTO

CAMERA

INPUT

IF NO REVERSE TRIGGER IS FOUND PLEASE FOLLOW THE SECOND DIAGRAM, IF YOU WOULD LIKE A

CONSTANT CAMERA AS WELL, A TRIGGER MUST BE BROUGHT FROM REVERSE LIGHT

(POWER TO

CAMERA)

DIAGRAM 3

Wiring Diagram: Reverse Camera (cont.)

1. Remove clips from original fascia panel... 2. Attach clips to new fascia panel

Prepare the fascia

1. Make sure all of your wiring is plugged into the back of the head unit and all of your cables are tucked

away neatly before securing the unit in place.

Install the new head unit and fascia

2. Rest unit in place, test all

features first and gently push

fascia panel back into position

3. Plug the air conditioning

control harnesses into the

back of the Air con panel

4. Gently push air

conditioning controls back in.

If you have any questions regarding the installation of the unit, please call 1300 555 514 and speak with

one of our installers.

Inhaltsverzeichnis

Andere Polaris Autozubehör Handbücher

Polaris

Polaris 2879976 Bedienungsanleitung

Polaris

Polaris RIDE COMMAND Bedienungsanleitung

Polaris

Polaris PROSPECTOR PRO Bedienungsanleitung

Polaris

Polaris 2879953 Bedienungsanleitung

Polaris

Polaris 2878669 Bedienungsanleitung

Polaris

Polaris 2878840 Bedienungsanleitung

Polaris

Polaris 2879719 Bedienungsanleitung

Polaris

Polaris 2882534 Bedienungsanleitung

Polaris

Polaris ToyotaLUXX Bedienungsanleitung

Polaris

Polaris 2879201 Bedienungsanleitung

Polaris

Polaris 2883419 Bedienungsanleitung

Polaris

Polaris 2880290 Bedienungsanleitung

Polaris

Polaris NG60 Bedienungsanleitung

Polaris

Polaris 2880325 Bedienungsanleitung

Polaris

Polaris FR-1516 Bedienungsanleitung

Polaris

Polaris SPORTSMAN PRO HD 2882242 Bedienungsanleitung

Polaris

Polaris RideCommand Bedienungsanleitung

Polaris

Polaris 2880056 Bedienungsanleitung

Polaris

Polaris 2876958 Bedienungsanleitung

Polaris

Polaris Mazda BT50 RW-50/15 Bedienungsanleitung

Polaris

Polaris RIDE COMMAND Bedienungsanleitung

Polaris

Polaris 2880411 Bedienungsanleitung

Polaris

Polaris 2879039 Bedienungsanleitung

Polaris

Polaris 2880612 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung