Prem-I-Air EH1369 Benutzerhandbuch

EH1369

11-Fin 2.5 kW Oil-Filled Radiator

with timer

Radiateur Bain d'Huile 11 Eléments

2,5 kW avec Programmateur

•3 Heat settings

•Adjustable thermostat

•24-hour timer

•Convenient built-in

carrying handle

•Castors for ease

of mobility

•Safety overload cut-out

•2 year guarantee

•Thermostat réglable

•Programmateur 24 heures

•Poignée intégrée

très pratique

•Roulettes pour un

déplacement aisé

•Coupure de sécurité en

cas de surchauffe

•Garantie 2 ans

Page 1

IMPORTANT

Installer and Users please note:

These instructions should be read carefully and left with the

user of the product for future reference.

BEFORE USE

Inspect the product including its cable and plug for any signs

of damage. If the product is damaged, DO NOT use it, and

contact your supplier immediately.

INSTALLATION

Attaching the feet.

Turn the heater upside down and place on a flat surface.

Hook the U-shaped brackets between the first and second

fins (from each end).

Push the ends of the U-shaped bracket through the holes in

the castor bracket.

Fix the wing nut to the threads on one end of the U-shaped

bracket, and tighten. The castor bracket should fit neatly

between the two fins.

Attach the castors to the holes in the ends of the castor

brackets using the dome-nuts.

Return the heater to the upright position.

Page 2

PRODUCT SAFETY

•This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and

understand the hazards involved.

•

Children shall not play with the appliance.

•Cleaning and user maintenance shall not be made by

children without supervision.

•Place the EH1369 on a firm flat surface.

•Ensure that there is at least 300 mm (1') between the sides

of the heater and any flammable materials

•Ensure that there is at least 900 mm (3') from the top of the

heater and any flammable materials.

•Do not place on soft surfaces.

•Do not cover. This symbol shown on the casing of

the heater means that the heater should not be

covered.

•For indoor use only

•Not suitable for use in boats, caravans or similar locations.

•Do not use this appliance in the immediate surroundings of

a bath, shower or swimming pool.

•Do not place the mains lead beneath a carpet or rug.

•Do not use the heater in locations where paint, petrol or

other flammable liquids are used or stored.

•Do not use the heater without the feet attached.

Page 3

OPERATION

Plug the mains lead into a 13 Amp mains socket.

If connecting via an extension lead, make sure that the lead

is rated at 13 Amps or more, and that it is fully unwound.

Switch the unit on at the mains socket.

Move the 3-position switch on the timer to the "I" position

Use the rotary power control switches on the side to select

the required operation:

•O= OFF

•I= Low Heat (1100 W)

•II = Medium heat (1400 W)

•III = High Heat (2500 W)

Unplug the heater from the mains when not in use.

USING THE THERMOSTAT

The thermostat can be use to regulate the room temperature.

Turn both switches on (high heat), and rotate the

temperature control fully clockwise.

The heater will then operate at maximum output. When the

desired temperature is reached, rotate the temperature

control anticlockwise until a click is heard. The heater will

then switch on and off to keep the room at the desired

temperature. The indicator light will show that this is

happening.

Either the low, medium or high heat setting can be used.

USING THE TIMER

The numbers around the timer dial show the time in 24-hour

clock.The timer is controlled by the plastic segments - each

segment represents 15 minutes. Move the segment outwards

if the heater should be ON for that time period, or inwards

towards the centre of the dial if it should be OFF.

Page 4

Rotate the dial clockwise until the arrowhead at the right of

the dial points to the current time.

To use the heater in timed mode, it should be permanently

connected to the mains supply. If the power is disconnected,

the clock will stop.

To operate the heater in timed mode, the three position

switch within the dial should be in the centre position. If it is in

the "I" position, the heater will be permanently ON. If it is in

the "O" position, the heater will be permanently OFF.

OPERATING COSTS

At time of going to press, the average cost of electricity is

£0.12 per unit (kilowatt-hour). The amount you are being

charged will be shown on your electricity bill.

At this cost, the EH1369 will cost £0.12 per hour to run on the

"low heat " setting, and £0.16 per hour to run on the "medium

heat" setting or £0.27 per hour to run on the "high heat"

setting, with the thermostat set to its maximum.

If the thermostat is used to regulate the temperature the

operating costs will be lower, depending on the room

temperature. MAINTENANCE

Before cleaning, turn the heater off, and disconnect from the

mains supply. The heater may then be cleaned using a damp

cloth with a drop of washing-up liquid to remove any dust or

dirt from the case. Do no use stronger detergents or solvents

as these may damage the plastic.

This heater is filled with a precise quantity of special oil.

Repairs requiring the opening of the oil container are only to

be made by the manufacturer or his service agent who

should be contacted if there is an oil leak.

Using a dry 1" (25 mm) paint-brush, remove any dust from

the grilles.

Page 5

If the mains lead is damaged, it must be replaced by the

manufacturer or an authorised service centre. If the mains

plug needs to be replaced, proceed as follows:

•Connect the brown wire to the

terminal labelled "L".

•Connect the blue wire to the

terminal labelled "N".

•Connect the green/yellow wire

to the terminal labelled with the

earth symbol or "E".

•Make sure that the cord-grip is

positioned correctly (over the

outer sheath of the cable) and it

fully tightened.

PAT TESTING.

When used in an office environment, this product must be

safety-tested yearly by a qualified electrician (PAT Tested) in

order to comply with the Electricity at Work Regulations.

We recommend that it is PAT tested regularly when used in a

domestic environment.

GENERAL SAFETY REQUIREMENTS

Domestic wiring must be tested periodically by a qualified

electrician at least once every 10 years or at every change of

occupancy.

For office and retail premises, and buildings such as village

halls, the wiring must be inspected at least once every 5

years.

It is recommended that all building be fitted with smoke

alarms (it is mandatory for new buildings).

Page 6

DISPOSAL AND RECYCLING

You must not dispose of this appliance with domestic

household waste.

Most local authorities have specific collection system for

appliances and disposal is free of charge to the end-user.

When replacing an existing appliance with a similar new

appliance your retailer may take the old appliance for

disposal.When scrapping the heater, follow the regulations

for the disposal of oil

FAULT-FINDING

If the EH1369 is not operating, proceed as follows:

Check that the mains plug is firmly in the socket, and that the

socket is switched ON.

Check that at least one of the power control switches is

switched ON.

If the built-in timer is not being used, check that the three-

position switch within the timer dial is in the "I" position.

If the built-in timer is being used, check that the dial shows

the correct time.

The EH1369 also has a overload protection device to prevent

overheating. If this operates, disconnect the heater from the

mains supply, and remove any objects on or adjacent to the

heater that could have caused the overheating. Wait 10

minutes, and reconnect to the mains supply.

The EH1369 is also fitted with a tip-over switch which

disconnects the power if the heater falls over. If the heater is

not operating, make sure that it is standing vertically.

If the heater still does not function, or the overload protection

device operates again, consult an authorised service agent.

Page 7

TECHNICAL SPECIFICATION

Dimensions: 520×250×640 mm

Weight: 13.9 kg

Power supply: 230 V ~

Power consumption: 2500 W

Operating current: 10.8 A

SERVICE WARRANTY

Prem-i-Air guarantees the product free from defects in

materials and workmanship for a period of two years.

This Elite product is guaranteed for a further twelve months

subject to the enclosed registration card being completed

and returned to the address printed on it, or the registration

form being completed on-line at www.prem-i-air.com

Should this unit be operated under conditions other than

those recommended, at voltages other than the voltage

indicated on the unit, or any attempts made to service or

modify the unit, then the warranty will be rendered void.

The product you buy may sometimes differ slightly from

illustrations. This warranty is in addition to, and does not

affect, your statutory rights.

If you have any problems with this product, please call our

Help Desk on (0845) 459 4816.

Prem-i-Air Appliances Ltd.,

Lancots Lane,

Sutton,

St. Helens,

Merseyside.

WA9 3EX

website: www.prem-i-air.com

Page 8

Inhaltsverzeichnis

Andere Prem-I-Air Heizung Handbücher

Prem-I-Air

Prem-I-Air EH1844 Bedienungsanleitung

Prem-I-Air

Prem-I-Air HQH2000H Bedienungsanleitung

Prem-I-Air

Prem-I-Air PFH0130R Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1846 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1794 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1890 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1840 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0154 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1550 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0287 Bedienungsanleitung

Prem-I-Air

Prem-I-Air PFH550 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1524 Handbuch

Prem-I-Air

Prem-I-Air PCH0501 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0209 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1426 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1712 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0291 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1372 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1710 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1566 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1436 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH1422 Bedienungsanleitung

Prem-I-Air

Prem-I-Air EH0153 Bedienungsanleitung

Prem-I-Air

Prem-I-Air Elite EH1331 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung