Pro-face PL-6700 Series Bedienungsanleitung

PL-6700 Series

Panel Computer

User's Manual

Digital Electronics Corporation

Preface

PL-6700 Series User’s Manual

Introduction

Digital’s PL-6700 series (PL-6700T, PL-6700S) of Panel Computers are multi-

purposefactoryautomation(FA)computers,whichembodyDigital’slatest,cost-

effectivearchitecture.

Before using the PL, read this manual thoroughly to familiarize yourself with

the PL’s operation procedures and functions.

1. It is forbidden to copy the contents of this manual in whole, or in part, without the

permission of the Digital Electronics Corporation.

2. The information in this manual is subject to change without notice.

3. This manual was written with care; however, if you should find any error or omis-

sions, please contact Digital Electronics and inform them of your findings.

4. Please be aware that we are not responsible for any damages resulting from the use of

our products, regardless of article 3 above.

5. Specifications set out in this manual are for overseas products only,and,as a result,some

differences may exist between the specifications given here and the Japanese ones.

Productnamesusedinthismanualarethetrademarksoftheirrespectivemanufacturers.

MS-DOS®andWindows®95areregisteredtrademarksoftheMicrosoftCorporation.

IBM®DOS®areregisteredtrademarksofIBM.

NOTE:

Preface

PL-6700 Series User’s Manual

Safe Product Usage

This manual contains a variety of safety markings to help you safely and cor-

rectly operate Digital’s PL-6700 series of Panel Computers, which includes the

PL-6700T and PL-6700S, each of which are hereafter referred to collectively as

the “PL.” Be sure to keep this manual handy for future reference.

 SafetyIcons

This manual uses the two icons below to call attention to information important

for the safe and correct use of the PL. Please pay attention to these icons and

follow all instructions given by them.

The safety icons and their meanings are:

Indicates a potentially hazardous situation which could result in

serious injury or even death, if the instructions are not followed.

Indicates a potentially hazardous situation which could result in

minor injury or equipment damage if the instructions are not fol-

lowed.

iii

Preface

PL-6700 Series User’s Manual

Essential Safety Precautions

Be sure to follow the instructions given below to ensure the safe

use of the PL.

To avoid a possiblity of electrical shock, be sure to connect the power cord to

the PL before connecting it to the main power supply.

A fire or electrical shock may result if voltages are used with the PL that are

beyond the specified range. Be sure to only use the specified voltage.

Before opening the PL’s protective cover, be sure to turn the unit’s power

OFF. This is because the PL’s internal parts carry high voltages.

To avoid fires or electrical hazards, do not modify the product in any way.

Do not create touch panel switches that are used to either control or to ensure

the safety of equipment and personnel. Mechanical switches, such as an

emergency stop switch, a deadman (two-handed) start switch, etc., must be

installed and operated via a separate control system.

If metal particles, water or other types of liquids contact any of the PL’s inter-

nal parts, immediately turn the unit’s power OFF, unplug the power cord,

and contact either your dealer or Digital Electronics Corporation.

Read and understand Chapter 4 “Installation and Wiring” thoroughly in order

to select an appropriate installation location for the PL.

Before either plugging in or unplugging a board or interface connector, be

sure to turn the PL’s power OFF.

To prevent a possible explosion, do not install the PL in areas containing

flammable gases.

The PL is not appropriate for use with aircraft control devices, aerospace equip-

ment, central trunk data transmission (communication) devices, nuclear power

control devices, or medical life support equipment, due to these devices’ inher-

ent requirements of extremely high levels of safety and reliability.

When using the PL with transportation vehicles (trains, cars and ships), di-

saster and crime prevention devices, various types of safety equipment, non-

life support related medical devices, etc. redundant and/or failsafe system

designs should be used to ensure the proper degree of reliability and safety.

Preface

PL-6700 Series User’s Manual

General Safety Precautions

Follow the instructions given below for correct and safe use of the PL.

Do not push on the PL’s screen too strongly, with either your finger or with a

hard object. Excessive pressure can scratch, crack or damage the screen.

If the screen becomes dirty or smudged, moisten a soft cloth with diluted neu-

tral detergent, wring the cloth well, and wipe the display. Do not use thinner or

organic solvents.

Do not use a pointed object, such as a mechanical pencil or screwdriver, to

press any of the touch panel’s switches, since they can damage the display.

Avoid exposing and operating the PL in direct sunlight, high temperatures and

humidity, and in areas where excessive dust and vibration will occur.

Avoid using the PL in areas where sudden, extreme changes in temperature can

occur. This may cause condensation to form inside the unit, possibly leading to

an accident.

To prevent the PL from overheating, be sure its air circulation vents are clear

and clean, and keep the unit’s operation area well-ventilated.

Avoid operating or storing the PL near chemicals, or where chemicals can come

into contact with the unit.

Since the PL-6700’s hard disk drive (HDD) is a consumable item, i.e. it has a definite

usage lifetime, be sure to back up its data frequently and perform regular maintenance.

To prevent file damage, be sure to shut down your PL’s OS before turning the PL OFF.

Notes on Handling the LCD

The PL's LCD contains a strong irritant. If the panel is ever cracked and the LCD's

liquid contacts your skin, be sure to wash it with running water for at least 15

minutes. If any of this liquid should enter your eye, be sure to flush your eye with

running water for more than 15 minutes, and see a doctor immediately.

The current brightness of the LCD screen will depend on the screen's current

display and the LCD's contrast adjustment. Any brightness variations that result

are normal for LCD displays.

There are minute grid-points (Dark or light points) on the LCD surface. These

points are not defects and are a part of the PL panel’s design.

Occasionally crosstalk (shadows appearing on extended display lines) will appear on the

display. This phenomenon is a common attribute of LCDs and is not a defect.

The displayed color will look different when viewed from an angle outside the

specified view angle. This is also normal.

Preface

PL-6700 Series User’s Manual

Displaying a single screen image for long periods of time can cause an afterimage

to remain on the screen. To correct this, turn the unit OFF for 5 to 10 minutes,

then ON again. This phenomenon is a common attribute of the LCDs, and is not

a defect. To prevent this effect, you can:

- use the Display OFF feature; if the same image is to be displayed for a long

period of time.

- change the screen display periodically to prevent the displaying of a single

image for a long period of time.

For further information about the PL’s LCD panel, please contact your local PL

distributor.

The Digital Electronics Corporation cannot be held responsible or pro-

vide any compensation for damage(s) caused by the loss of data stored

in the PL-6700’s hard disk drive (HDD). It is therefore strongly sug-

gested that all important data and software be backed up regularly to

an external data backup device.

Please be aware that the Digital Electronics Corporation bears no re-

sponsibility for any damages resulting from the customer’s application

of this unit’s hardware or software.

Please be aware that the Digital Electronics Corporation will not provide

compensation for any damages occurring as a result of problems with

this unit’s software or hardware.

Important

Preface

PL-6700 Series User’s Manual

Notes on UL Application

The PL6700-T4* and the PL-6700-S4* are (c)UL 1950 recognized prod-

ucts. (UL File No. E177793). Please pay special attention to the following

instructions when applying for UL approval for machinery which includes

one of these PL units built in. Machinery with a PL mounted in it requires

UL inspection for the combination of the PL and the machinery.

PL conforms as a component to the following standards:

UL 1950, Third Edition, dated July 26, 1995 (Standard for Safety of

Information Technology Equipment, including Electrical Business Equip-

ment)

CSA-C22.2 No. 950-M93 (Standard for Safety of Information Technol-

ogy Equipment, including Electrical Business Equipment)

PL6700-T4* (UL Registration Model No.: 0880044-1)

PL6700-S4* (UL Registration Model No.: 0880044-2)

If the PL is installed so as to cool itself naturally, be sure to install the PL

in a vertical position. Also, be sure that the PL is installed so that it is at

least 50mm away from any adjacent structures or devices. If these re-

quirements are not met, the heat generated by the PL’s internal compo-

nents may cause the unit to fail to meet UL standard requirements.

Notes on CE Marking

The PL6700-T4* and the PL6700-S4* are CE marked, EMC compliant

products.

89/336/EEC, 92/31/EEC, 93/68/EEC, 73/23/EEC

Safety

IEC950 (A3:1995), EN60950 (A3:1995)

EMI (EN50081-2)

EN55022 (Class A) (1994), EN61000-3-2 (1995), EN61000-3-3 (1995)

EMS (EN50082-2)

EN61000-4-2 (1995), EN61000-4-4 (1995), EN61000-4-5 (1995),

EN61000-4-8 (1993), EN61000-4-11 (1994), ENV50140 (1993),

ENV50141 (1993), ENV50204 (1995)

vii

Preface

PL-6700 Series User’s Manual

What is IP65f?

This unit's protection rating of IP65f is actually a composite code, consisting

of the internationally recognized British "Ingress Protection" standard (BS

EN 60529:1992) - "IP65", and the standard developed by the Japanese Elec-

tronics Manufacturer's Association (JEM) - "f". This code is used in this

manual to identify a given product's degree of structural resistance to a vari-

ety of environmental elements and thus, prevent problems or accidents re-

lated to the inappropriate use of a product.

The individual meaning of each character of this code is explained below.

This code indicates the degree of ingress protection provided from the front

face of the PL, and assumes that the PL is securely mounted into a metal

panel.

IP 6 5 f

(1) (2) (3) (4)

(1) Designates the type of protection provided.

(2) Indicates the degree of protection provided to the human body by the

unit, and the degree of protection provided by the unit's front face from par-

ticles/dust intrusion into the interior of the unit.

Here, "6" indicates that the unit is completely protected from dust intrusion.

(3) Indicates the degree of protection provided by the unit's front face from

water intrusion into the interior of the unit.

Here, "5" indicates that the unit is protected from water intrusion from a

direct water jet.

(4) Indicates the degree of protection provided by the unit's front face from

oil particle intrusion into the interior of the unit.

Here, "f" indicates that the unit is completely protected from oil intrusion

via either oil particles or oil splashes from any direction (to the front panel).

For information about the PL's protective structure, refer to page 2-3.

Note:

viii

Preface

PL-6700 Series User’s Manual

Table of Contents

Preface

Introduction .................................................................................................................. i

Safe Product Usage...................................................................................................... ii

Essential Safety Precautions....................................................................................... iii

General Safety Precautions......................................................................................... iv

What is IP65f? ........................................................................................................... vii

Table of Contents...................................................................................................... viii

Prior to Using the PL.................................................................................................. xi

New PL-6700 Features .............................................................................................. xii

Unpacking the PL ..................................................................................................... xiii

Information Symbols ................................................................................................ xiv

Chapter 1 Overview

1-1 System Configuration ...................................................................................... 1-1

1-2 Options .............................................................................................................. 1-2

1-3 PL Series Panel Types ...................................................................................... 1-3

Chapter 2 Specifications

2-1 General Specifications .................................................................................... 2-1

2-1-1 Electrical Specifications ....................................................................... 2-1

2-1-2 Environment Specifications.................................................................. 2-1

2-1-3 Dimensions ........................................................................................... 2-1

2-2 Performance Specifications............................................................................ 2-2

2-2-1 Performance Specifications .................................................................. 2-2

2-2-2 Display Functions ................................................................................. 2-2

2-2-3 Expansion Slots .................................................................................... 2-3

2-3 Interface Specifications .................................................................................. 2-4

2-3-1 Printer Interface .................................................................................... 2-4

2-3-2 Keyboard Interface ............................................................................... 2-4

2-3-3 Mouse Interface .................................................................................... 2-5

2-3-4 RS-232C Interface (COM1/COM2/COM3) ......................................... 2-5

2-3-5 CRT Interface (VIDEO)........................................................................ 2-5

2-3-6 Contrast Adjustment (PL-6700S only) ................................................. 2-6

2-4 PL External Features......................................................................................2-7

2-5 PL Dimensions................................................................................................. 2-9

2-5-1 PL-6700T/PL-6700S General Dimensions........................................... 2-9

2-5-2 Installing the Full Size Cover ............................................................. 2-11

2-5-2 Installation Slot Dimensions............................................................... 2-12

Preface

PL-6700 Series User’s Manual

Chapter 3 Installing Optional Units and Expansion Boards

3-1 Available Options and Expansion Boards ..................................................... 3-1

3-2 Installing Options and Expansion Boards ..................................................... 3-3

3-2-1 Attaching the PL’s Support Leg............................................................ 3-3

3-2-2 Installing the DIM Module (PL-EM200).............................................. 3-4

3-2-3 Removing or Installing the FDD Unit (PL-FD100).............................. 3-6

3-2-4 Removing or Installing the HDD unit (PL-HD100) ............................. 3-7

3-2-5 Installing an Expansion Board.............................................................. 3-9

3-2-6 Installing the IDE Slave Adapter (PL-SA100) ................................... 3-11

Chapter 4 Installation and Wiring

4-1 Installation Cautions........................................................................................ 4-1

4-2 Installing the PL ............................................................................................... 4-3

4-2-1 Installation Procedures ......................................................................... 4-3

4-3 Wiring the PL ................................................................................................... 4-6

4-3-1 Connecting the Power Cord.................................................................. 4-6

4-3-2 Power Supply Cautions ........................................................................ 4-8

4-3-3 Grounding Cautions.............................................................................. 4-9

4-3-4 Cautions When Connecting I/O Signal Lines....................................... 4-9

Chapter 5 System Setup

5-1 Setup Procedures............................................................................................. 5-1

5-2 System Parameters.......................................................................................... 5-2

5-2-1 STANDARD CMOS SETUP ............................................................... 5-2

5-2-2 BIOS FEATURES SETUP ................................................................... 5-4

5-2-3 CHIPSET FEATURES SETUP ............................................................ 5-6

5-2-4 POWER MANAGEMENT SETUP ..................................................... 5-7

5-2-5 PNP/PCI CONFIGURATION SETUP ................................................. 5-9

5-2-6 INTEGRATED PERIPHERALS SETUP........................................... 5-11

5-2-7 IDE HDD AUTO DETECTION SETUP ........................................... 5-13

5-2-8 HDD LOW LEVEL FORMAT SETUP.............................................. 5-14

Chapter 6 Bundled Software

6-1 PL-6700 Floppy Disk File List ....................................................................... 6-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pro-face Touchscreen Handbücher

Pro-face

Pro-face GP-2500 Series Bedienungsanleitung

Pro-face

Pro-face PFXGP4502WADW Bedienungsanleitung

Pro-face

Pro-face GP377-LG Series Stücklistenhandbuch

Pro-face

Pro-face GP-377RT Bedienungsanleitung

Pro-face

Pro-face GP577R-SC11 Stücklistenhandbuch

Pro-face

Pro-face PS-3710A Series Bedienungsanleitung

Pro-face

Pro-face GP37W2-BG41-24V Bedienungsanleitung

Pro-face

Pro-face PS300-BU00 Stücklistenhandbuch

Pro-face

Pro-face GP-2400 Series Bedienungsanleitung

Pro-face

Pro-face GP77R Series Gebrauchsanweisung

Pro-face

Pro-face GP-3400 Series Bedienungsanleitung

Pro-face

Pro-face PFXGP4401TADR Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Bedienungsanleitung

Pro-face

Pro-face GP-577R Series Bedienungsanleitung

Pro-face

Pro-face PL-6920 Series Bedienungsanleitung

Pro-face

Pro-face FP2600-T41 Bedienungsanleitung

Pro-face

Pro-face PS-3700A Bedienungsanleitung

Pro-face

Pro-face FP2600-T11 Bedienungsanleitung

Pro-face

Pro-face PS-3650A Series Bedienungsanleitung

Pro-face

Pro-face PL-5900 Series Bedienungsanleitung

Pro-face

Pro-face GP3000 Series Betriebsanleitung

Pro-face

Pro-face GP4000 SERIES Bedienungsanleitung

Pro-face

Pro-face SP5000 Series Bedienungsanleitung

Pro-face

Pro-face PS-4700 Series Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung